Introduction & Warranty
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only. The LED tube can be used in hotels, offices, factories, conference rooms, meeting rooms, commercial complexes, residential buildings, schools, colleges, universities, hospitals, etc.
Technical Data
| Model | VT-061 | VT-121 | VT-151 | VT-062 | VT-122 | VT-152 |
|---|---|---|---|---|---|---|
| Watts | 9 | 18 | 20 | 7.5 | 16.5 | 24 |
| Lumens | 850 | 1850 | 2100 | 850 | 1850 | 3000 |
| CRI | >80 | >80 | >80 | >80 | >80 | >80 |
| DF | >0.5 | >0.7 | >0.7 | >0.5 | >0.7 | >0.7 |
| Beam Angle | 160° | 160° | 160° | 160° | 160° | 160° |
| Body Type | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic |
| Holder | G13 | G13 | G13 | G13 | G13 | G13 |
| Long Life | 25,000 Hours | 25,000 Hours | 25,000 Hours | 25,000 Hours | 25,000 Hours | 25,000 Hours |
| On/Off Cycles | >15000 | >15000 | >15000 | >15000 | >15000 | >15000 |
| Dimension | 600x28mm | 1200x28mm | 1500x28mm | 600x28mm | 1200x28mm | 1500x28mm |
| Input Power | AC:220-240V,50Hz | AC:220-240V,50Hz | AC:220-240V,50Hz | AC:220-240V,50Hz | AC:220-240V,50Hz | AC:220-240V,50Hz |
Important Information
Warnings and Symbols
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric shock.
- LED Lamps suitable for 50Hz operation
- LED Lamps to be used in dry conditions or in a luminaire that provides protection
- ❌ LED Tubes are NOT suitable for dimming
- ❌ LED Tubes not suitable for emergency operations
Packaging Contents
- LED Tube (1PC)
- Instruction Manual (1PC)
- Dummy Starter (1PC)
The product utilizes Samsung LED chips.
Installation Instructions
New Fitting Installation
Installation should only be done by a certified electrician.
- Switch off the power.
- Ensure the wiring diagram is followed as highlighted.
- Insert V-TAC LED Tube.
- Switch on the power to test the light.
Wiring Diagram:
Power Source: AC:220-240V 50Hz.
Connection: (L) V-TAC INPUT (N) Left -> LED TUBE -> Right. This configuration is for Single Side Power Only.
Installation & Replacement of Fluorescent Lamp (Single Magnetic Ballast Circuit)
Installation should only be done by a certified electrician.
Refer to the wiring diagram for replacing a fluorescent tube on a single magnetic ballast circuit with a V-TAC LED Tube.
Wiring Diagram:
Components: LED Starter, V-TAC INPUT, LED TUBE, Inductance Ballast.
Power Source: AC:220-240V 50Hz.
Connection: Left -> V-TAC INPUT -> LED TUBE -> Right.
Step-by-step Replacement:
- Switch off the power.
- Remove the existing fluorescent lamp.
- Remove the existing fluorescent starter.
- Insert LED T8 starter.
- Insert V-TAC LED Tube.
- Switch ON the power.
