V-TAC LED Solar Floodlight Installation Instructions
Meaningful Innovation.
Warnings
- Please ensure power is off before installation.
- The light source is not replaceable; the entire luminaire must be replaced at end of life.
- If the external flexible cable is damaged, it must be replaced by the manufacturer, service agent, or qualified person to avoid hazards.
- Replace any cracked protective shield.
- Installation must be performed by a certified electrician.
This marking indicates that this product should not be disposed of with other household wastes.
Application
Building Façade, Sports Facilities, Industrial, Commercial Bill Boards & Hoardings, Parking Lots etc.
Technical Data
| Model | Solar Panel | Lumens | Beam Angle | IP Rating | Operation Temperature | Battery Type | Charging Time | Working Time | Input Power | Installation Height | Dimension |
|---|---|---|---|---|---|---|---|---|---|---|---|
| VT-25W | 12W | 550 | 120° | IP65 | -20°C to +45°C | 5000mAh | 4 Hours | 8 Hours | DC:3.2V | 4-6 Meters | 206x54x148mm |
| VT-40W | 16W | 1050 | 120° | IP65 | -20°C to +45°C | 10000mAh | 4 Hours | 8 Hours | DC:3.2V | 4-6 Meters | 255x68x190mm |
| VT-60W | 20W | 1650 | 120° | IP65 | -20°C to +45°C | 20000mAh | 4 Hours | 8 Hours | DC:3.2V | 4-6 Meters | 284x76x223mm |
| VT-100W | 35W | 2450 | 120° | IP65 | -20°C to +45°C | 30000mAh | 4 Hours | 8 Hours | DC:3.2V | 4-6 Meters | 335x86x250mm |
| VT-200W | 40W | 3100 | 120° | IP65 | -20°C to +45°C | 40000mAh | 4 Hours | 8 Hours | DC:3.2V | 4-6 Meters | 360x90x290mm |
| VT-300W | 50W | 4200 | 120° | IP65 | -20°C to +45°C | 50000mAh | 4 Hours | 8 Hours | DC:3.2V | 4-6 Meters | 445x110x380mm |
Parts Included
- [Solar Panel]
- [LED Floodlight]
- [Remote Control]
- [Expansion Screw] (x2)
- [U-frame]
- [5m Wire]
Remote Control Functions
The remote control is designed with an operation distance of 8-15m.
- 3 hours regular
- 5 hours regular
- 8 hours regular
- Optically controlled mode
- Force to turn on the lights (Optical control is null)
- Force to turn off the lights (Optical control is null)
- [Brightness Up]
- [Brightness Down]
Installation Guide
- Before installing, please check if all parts are in good condition.
- The luminaire is connected to the solar panel. Ensure the solar panel is adjusted to the correct angle to receive sunlight.
- The lamp comes with two expansion screws.
- The solar panel angle must be adjusted in the correct direction to receive sunlight.
- Lamps cannot be installed in low-lying areas prone to soaking.
- Connect the male and female plugs and tighten the waterproof cap.
- After installation, test the light using the remote control.
Note: The battery must be fully charged before using 3-5 rainy days.
Maintenance & Warnings
- Do not use solvents, petrol, etc., as this may damage the light.
- Clean the light with a dry, lint-free cloth.
- Regularly check the solar panel for dirt. Remove any dirt to ensure product functionality.
- During winter, keep the product free from snow and ice.
- Confirm installation direction is correct (solar panel should be at the top).
- Ensure no objects are blocking the solar panel from receiving sunlight.
- Keep away from fire.
- Do not immerse in water.
Introduction & Warranty
Thank you for choosing V-TAC products. V-TAC is committed to providing excellent service. Please read these instructions carefully before installation and keep this manual for future reference. For any queries, contact your dealer or local vendor. The warranty is valid for 2 years from the date of purchase. The warranty does not cover damage caused by incorrect installation or abnormal wear and tear. The company provides no warranty against surface damage due to incorrect product removal and installation. This product is warranted for manufacturing defects only.
[Warranty Period: 2 Years]
