INDUSTRIELL Armchair
Assembly Instructions
This document provides assembly instructions for the INDUSTRIELL armchair by IKEA. Please follow the steps carefully to ensure correct assembly.
Important: Before starting, ensure you have all parts and tools listed. Assemble on a soft surface, like a carpet, to avoid scratching the furniture.
Parts Included
- 12x Screw (Part ID: 190733)
- 1x Allen Key (Part ID: 108490)
Assembly Steps
-
Step 1
Attach the side frames to the seat base. Ensure the correct orientation as shown in the diagram. Use the provided screws (190733) and the Allen key (108490). Do not overtighten initially.
Diagram Description: Shows two side frames being attached to a seat base. An inset shows a close-up of a screw being inserted and tightened with an Allen key. A 'no' symbol is shown over an incorrect assembly method.
-
Step 2
Attach the backrest to the assembled seat and side frames. Align the holes and secure with screws (190733). Again, do not fully tighten yet.
Diagram Description: Shows the backrest being attached to the main frame. An inset shows a close-up of screws being inserted and tightened. A 'no' symbol is shown over an incorrect assembly method.
-
Step 3
Attach the armrests to the sides of the chair. Align the armrests with the pre-drilled holes and secure them using screws (190733).
Diagram Description: Shows the armrests being attached to the sides of the chair. An inset shows a close-up of screws being inserted and tightened. A 'no' symbol is shown over an incorrect assembly method.
-
Step 4
Turn the chair upright. Attach the top support bar to the back of the chair using screws (190733).
Diagram Description: Shows the chair being turned upright and a top support bar being attached to the back. An inset shows a close-up of screws being inserted and tightened. A 'no' symbol is shown over an incorrect assembly method.
-
Step 5
Once all parts are assembled, go back and tighten all screws securely using the Allen key (108490).
Diagram Description: Shows the fully assembled INDUSTRIELL armchair. An inset shows a close-up of screws being tightened.
Important Notes
- Periodically check that all screws are tightened.
- Do not use power tools for assembly, as this may damage the product.
- Keep small parts away from children.
