HAVSTEN Outdoor Sofa Assembly Instructions
Product Code: AA-2336949-1
Introduction
This document provides assembly instructions for the IKEA HAVSTEN outdoor sofa. Please read all instructions carefully before beginning assembly. Ensure all parts are present and undamaged.
Important Safety & Assembly Notes:
- ❌? Do not use power tools or excessive force.
- ✅ Use hand tools for assembly.
- ✅ Ensure correct alignment of parts.
- ❌ Do not assemble on rough or abrasive surfaces.
- ?️ Assemble on a soft surface like a rug to prevent scratches.
- ❓ If you have questions or missing parts, refer to the manual or contact IKEA customer service.
- ? Contact IKEA customer service for assistance.
Parts List
- 8x Screw (Part No: 190126)
- 4x Bolt (Part No: 10002405)
- 1x Allen Key (Part No: 108490)
- 4x Connector Clip
- 8x Rod/Tube
- 2x Rod/Tube
- 1x Central Backrest Support Bar
- 2x Seat Base Frame Piece
- 2x Fabric Panel (Backrest cover)
Assembly Steps
Step 1
Attach four rods (8x Rod/Tube) to the two seat base frame pieces (2x Seat Base Frame Piece). Use four bolts (10002405) and the Allen key (108490). The close-up views show the bolt being inserted and tightened into the frame.
Step 2
Attach two backrest support frame pieces to the seat base frame. Insert rods into designated holes on the frame pieces. The close-up shows a rod being inserted into a hole.
Step 3
Attach two more rods (2x Rod/Tube) to the backrest support frame pieces. The close-up shows rod insertion and tightening.
Step 4
Attach the remaining two backrest support frame pieces to the seat base frame structure. Insert rods into designated holes and secure. The close-up views show rod insertion and tightening.
Step 5
Connect the two seat base frame pieces together. Use four connector clips (4x Connector Clip) to secure them. The close-up views show how the clips attach to the frame.
Step 6
Prepare the two fabric back panels (2x Fabric Panel). Attach them to the backrest frame. The diagram shows the panels being slid onto the frame rods. The close-up shows the fabric edge being placed over a rod.
Step 7
Insert the remaining eight rods (8x Rod/Tube) into the fabric panels. The close-up views demonstrate rolling the fabric edge around a rod and securing it, ensuring a taut fit.
Step 8
Attach the final side frame pieces to the main sofa structure. Use eight screws (8x Screw, Part No: 190126) and the Allen key (108490). The close-up view shows screw insertion and tightening. Warning icons indicate correct and incorrect screw placement/orientation.
Step 9: Strap Adjustment
Adjust the straps for a secure fit. The diagrams show how to tighten and release the straps.
- ⬆️ Tighten strap
- ⬇️ Release strap
Step 10: Place Cushions
Place the seat and back cushions onto the assembled sofa frame. Arrows indicate the direction of placement.
Step 11: Final Check & Care
Perform a final check of all connections. The diagram shows the completed sofa. Care instructions indicate hand washing for fabric covers (? Hand Wash).
The diagram also shows a repeat of attaching frame pieces with screws, similar to Step 8, possibly for final structural integrity or a different section.
