Welcome to Your New Philips TV

This guide provides essential steps for setting up your Philips 6805 or 6855 series television. For detailed information, please refer to the full user manual.

Step-by-Step Stand Assembly

Follow these instructions to attach the TV stand securely.

1. Unboxing and Preparation

Carefully remove the TV and all accessories from the packaging. Lay the TV screen-down on a soft, clean surface (like a blanket or the foam packaging) to prevent scratches. Identify the stand components and the required screws (typically 4 per stand section).

2. Attaching the First Stand Piece

Align the first part of the stand with the designated mounting points on the bottom of the TV. Ensure the correct orientation as shown in the diagrams.

3. Securing the First Stand Piece

Insert the provided screws (e.g., 4 screws) into the pre-drilled holes and tighten them firmly. Do not overtighten.

4. Attaching the Second Stand Piece

Align the second part of the stand with its corresponding mounting points on the TV or the already attached stand piece.

5. Securing the Second Stand Piece

Insert and tighten the remaining screws (e.g., 4 screws) to complete the stand assembly.

6. Final Placement

With the stand securely attached, carefully lift the TV and place it upright on a stable, level surface.

Connecting Your Devices

Your Philips TV offers a variety of ports on the rear panel for connecting external devices:

• HDMI 1 (ARC): For connecting audio/video devices, supporting Audio Return Channel.
• HDMI 2: Standard HDMI input.
• HDMI 3: Standard HDMI input.
• USB 1/2: For media playback or powering devices (5.0V-500mA).
• Digital Audio Out (Optical): Connect to soundbars or home theater systems.
• Network: For wired internet connectivity.
• Antenna: Connect your aerial for terrestrial TV.
• Satellite (EU): For connecting a satellite dish.
• Common Interface (CAM): For inserting conditional access modules.

Remote Control Setup

Install two AAA R03 1.5V batteries into the remote control, ensuring correct polarity (+/-).

VESA Mounting Compatibility

For wall mounting, check VESA specifications. For example, a 43-inch model may require a 200x200mm VESA mount using M6 screws (12mm-16mm length).

Important Information and Support

Safety First: Always read the safety instructions provided with your television before operation. These instructions cover important precautions for safe use.

Product Support: Register your product and find support, manuals, and software updates at: www.philips.com/TVsupport

Model Information: This guide applies to Philips 6805 and 6855 series televisions.