Philips 6009 Series Television Quick Start Guide

Getting Started

This guide provides instructions for setting up your Philips 6009 series television, including stand installation and connecting essential cables. For detailed safety information, please refer to the multilingual instructions provided within the product documentation.

Stand Installation

Follow these steps to attach the TV stand:

1. Step A: Prepare the TV and Stand Components

   Carefully unpack the television and stand parts. The stand consists of two types of legs, labeled A and B. Ensure you have the correct legs for your TV size (32" or 40").

   Visual Description: Two people are shown lifting the television from its packaging. Separate stand legs are displayed.

2. Step 1: Position the TV for Assembly

   Place the television screen-down on a soft, flat surface, such as a blanket or cushion, to protect the screen. Ensure the surface is stable.

   Visual Description: The TV is placed face down on a table covered with a protective cloth. [warning] Ensure the surface is soft and stable.

3. Step 2: Attach the Stand Legs

   Align the stand legs (A and B) with the corresponding mounting points on the back of the TV. Use the provided screws (Q4xL18) to secure the legs. For 32" models, two sets of legs (Q4xL18) are used. For 40" models, four sets of legs (Q4xL18) are used.

   Visual Description: Close-up views show how leg A and leg B attach to the TV base. Screws are inserted and tightened. [✓] Use the correct screws for each leg.

4. Step 3: Stand the TV Upright

   With the stand attached, carefully lift the television upright. It is recommended to have two people for this step to ensure safety and stability.

   Visual Description: Two people are shown lifting the TV from its stand and placing it upright.

Wall Mounting Information

If you plan to wall mount your television, please note the following:

• Mounting Dimensions: Both 32" and 40" models support a 200x200mm VESA mounting pattern.
• Screw Size: Use M4 screws with a length between 6mm and 9mm.

Visual Description: A diagram shows the VESA mounting hole pattern (200x200mm) and specifies the required screw type and length.

Connecting Your Devices

Connect your external devices and power source as follows:

• Power: Connect the power cord to the TV and a wall outlet.
• Antenna/Cable: Connect a coaxial cable from your TV antenna or cable source to the 'TV ANTENNA' port.
• Network: Connect your router to the 'NETWORK' port using an Ethernet cable for internet connectivity.
• HDMI Devices: Connect devices like Blu-ray players, game consoles, or set-top boxes using HDMI cables to the 'HDMI 1', 'HDMI 2', or 'HDMI 3' ports. Use 'HDMI 1 (ARC)' for audio return channel capabilities.
• Audio Output: Connect external speakers or soundbars to the 'DIGITAL AUDIO OUT' (TOSLINK or COAXIAL) port.
• USB Devices: Connect USB drives or other compatible devices to the 'USB 1/2' ports.
• Common Interface: Insert a CAM module for conditional access to digital TV services.
• Headphone: Connect headphones to the 'HEADPHONE' port for private listening.

Visual Description: A comprehensive diagram illustrates the rear panel of the TV with all ports labeled and connections shown for power, antenna, network (router), HDMI devices, audio out, USB devices, common interface, and headphones. The remote control with battery compartment is also shown. The remote requires two AAA 1.5V batteries. [ℹ️] For optimal performance, use an Ultra High-speed HDMI cable.

Support and Registration

Register your TV to access more information and support services via www.philips.com/TVsupport.

For more product information and welcome resources, visit www.philips.com/welcome.