Philips 8009 Series Television Quick Start Guide
Your essential guide to setting up your new Philips television.
Getting Started
This guide provides the necessary steps to set up your Philips Television from the 8009 Series.
Stand Assembly
Follow these instructions to attach the stand to your TV. Ensure you use the correct screws for your specific TV size.
For 43", 50", and 55" models:
Use four (4) [screw-Q4xL18] screws to attach the stand components (labeled L and R) to the TV base. The diagrams show inserting screws with a [screwdriver-icon] into the designated holes.
For 65" models:
Use four (4) [screw-M4xL20] screws to attach the stand components (labeled L and R) to the TV base. The diagrams show inserting screws with a [screwdriver-icon] into the designated holes.
Visual Description: The diagrams illustrate attaching the left and right stand pieces to the bottom of the TV. Arrows indicate the direction of screw insertion.
Wall Mounting
Your TV can also be mounted on a wall. Ensure you use appropriate wall mounting hardware (not included) and follow safety guidelines.
Wall Mount Dimensions (VESA) and Screw Specifications:
| TV Size | VESA Pattern (x, y) | Screw Size (Length) | Screen Diagonal |
|---|---|---|---|
| 43" | 200x100mm | M6 (9mm~10mm) | 108 cm |
| 50" | 200x100mm | M6 (9mm~10mm) | 126 cm |
| 55" | 200x100mm | M6 (9mm~10mm) | 139 cm |
| 65" | 400x300mm | M8 (12mm~22mm) | 164 cm |
Visual Description: A table details the VESA mounting hole dimensions and the required screw specifications for different screen sizes.
Recommended distance from the wall: 7 to 20 cm.
Connections
Connect your TV to power, your network, and external devices for a complete entertainment experience.
Remote Control Setup
To operate your TV, insert two (2) [battery-AAA] batteries into the remote control. Ensure correct polarity (+/-).
Visual Description: The diagram shows opening the battery compartment of the remote control and inserting batteries according to the polarity markings.
Connecting Cables
Connect the following cables to the appropriate ports on your TV:
- Power: Connect the power cable to the POWER port.
- Network: Connect a network cable (e.g., Ethernet) to the NETWORK port for internet access.
- TV Antenna/Satellite: Connect your TV antenna or satellite receiver to the TV ANTENNA or SAT (EU) port using a coaxial cable.
- HDMI Devices: Connect devices like Blu-ray players, game consoles, or set-top boxes to the HDMI 2/3 or HDMI 1 (eARC) ports using an Ultra High-speed HDMI cable.
- Common Interface: Insert a CAM module into the COMMON INTERFACE slot if you subscribe to pay TV services.
Visual Description: Diagrams illustrate connecting power, network, antenna, satellite, USB devices, and HDMI devices to the rear and side panels of the TV. Specific ports are clearly labeled: POWER, NETWORK, TV ANTENNA, SAT (EU), USB 1/2, HDMI 2/3, HDMI 1 eARC, and COMMON INTERFACE.
Support and Registration
Register your product online to access more information and receive dedicated support.
Visit: www.philips.com/TVsupport
Safety Information
It is important to read the safety instructions provided with your TV before use. These instructions are available in numerous languages:
- English
- Bulgarian
- Spanish
- French
- Italian
- Czech
- Kazakh
- Croatian
- Latvian
- Danish
- German
- Greek
- Estonian
- Lithuanian
- Hungarian
- Dutch
- Norwegian
- Polish
- Portuguese
- Romanian
- Russian
- Serbian
- Slovenian
- Slovak
- Finnish
- Swedish
- Thai
- Turkish
- Ukrainian
- Arabic
- Hebrew
TV Support | Philips
