HelloBaby HB40 Digital Wireless Video Baby Monitor User Manual

Introduction

Thank you for purchasing the HB40 Baby Monitor. This device allows you to see and hear your baby anytime. Please retain your sales receipt for warranty service.

Package Contents

• Parent unit x 1
• Camera unit x 1
• User manual x 1
• Wall-mounting kit x 1
• Power Adapter x 2

1. Safety Instructions

CAUTION: Keep the device away from children.

• Strangulation Hazard: Keep cords out of reach of children (more than 3ft/0.9m away). Use only provided AC Adapters and do not use extension cords.
• Choking hazard: This product contains small parts.
• Read and keep instructions for safe operation. This product cannot replace adult supervision.
• Water and moisture: For indoor use only. Do not expose to rain, moisture, dripping, or splashing. Do not place liquid-filled objects near the product.
• DO NOT: Use if the cord or plug is damaged. Contact service for inspection and repair to avoid risks.
• DO NOT: Attempt to repair or adjust electrical or mechanical functions, as this will void the guarantee.
• Ventilation: Do not block ventilation openings. Do not place in enclosed areas that impede airflow.
• Keep away from sources of heat: Avoid direct heat sources like candles, radiators, stoves, or direct sunlight.
• Power source: Use only the provided AC power adapters (rated 5V DC 1A).
• Damage requiring service: Service is required if objects have fallen into the product, liquid has been spilled, the units have been exposed to rain, do not operate normally, or the enclosure is damaged.

2. Warranty Terms

Offers a one-year warranty against defects in workmanship and materials from the original purchase date. Contact after-sales service via email for warranty or support issues.

3. Installation Guidelines

• Establish a radio link between parent and camera units. Range may be affected by environmental conditions.
• Large metal objects (refrigerators, mirrors, cabinets), metallic doors, or reinforced concrete can block the radio signal.
• Signal strength may be reduced by solid structures (walls) or electronic equipment (TVs, computers, phones, fluorescent lights).
• Other 2.4GHz products (Wi-Fi routers, Bluetooth systems, microwaves) may cause interference. Keep the baby monitor at least 5ft (1.5m) away from these products or turn them off if interference occurs.

4. Placement of the Baby Monitor

• The camera can be placed on a desktop or mounted on a wall.
• Avoid placing the monitor on soft surfaces like quilts or blankets, or in corners of cupboards/shelves.
• Keep the monitor away from heat sources (radiators, chimneys, cookers) and direct sunlight.
• Keep the baby unit away from TV sets, microwave ovens, and radios.
• If interference occurs, move the camera to a different location.
• For optimum performance, place the camera within 6 feet (2 meters) of the area being monitored.

5. Getting Started

5.1 Turn On the Baby Unit

1. Insert the DC plug of the power adapter into the DC jack on the rear of the Baby Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. The power LED will light up once the adapter is connected.

5.2 Turn On the Parent Unit

1. Insert the DC plug of the power adapter into the DC jack on the side of the Parent Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Press and hold the power key for 3 seconds on the front of the parent unit.
4. The power LED will light up, and the image will display on the LCD.

5.3 Infrared Night Vision (Automatic)

The infrared night vision function allows the camera to pick up images in dark or low light conditions. Images will be displayed in black and white. For optimal image quality, the baby unit should be 6ft (2m) away from the object. A night vision icon 📸 will be displayed on the top of the screen when night vision is active.

6. Product Overview

6.1 Icons Overview

6.2 Parent Unit Overview

Components: 4.0" Diagonal IPS TFT LCD, Speaker, Antenna, Power key, MIC, Up key, Exit/Two Way Talk key, Menu/OK key, Right Key, Down Key, Left Key, Zoom/Scan key, Reset Key, DC-jack, Stand, Charging LED, Power LED, Sound Level Indicator.

Back of Parent Unit: HelloBaby logo, Model: HB40, 2.4GHz Digital Wireless Video Baby Monitor, INPUT: DC 5V 1.0A, Li-ion Battery 3.7V, 2000mAh, FCC ID: 2AF2R-40RX, IC: 20674-40RX, service@hellobaby.net.cn, Made in China, S/N: XXYYYYYYHR, RESET button.

6.3 Baby Unit Overview

Components: MIC, Light sensor, Infrared LEDs, Lens, Speaker, Antenna, Power LED, DC-Jack, Pair key, Temperature sensor.

7. Key Operation

• 7.1 Turn On/Off: Press and hold the power key for 3 seconds.
• 7.2 Up Key: Press once to tilt camera up; press and hold for continuous tilt.
• 7.3 Down Key: Press once to tilt camera down; press and hold for continuous tilt.
• 7.4 Left Key: Press once to pan camera left; press and hold for continuous pan.
• 7.5 Right Key: Press once to pan camera right; press and hold for continuous pan.
• 7.6 Camera View/Scan: Press scan key to view/scan cameras. During scan mode, the scan icon 📸 will be displayed. Each camera's video displays for 10 seconds before switching.
• 7.7 Digital Zoom: Press and hold the 🔍 key for 2 seconds to zoom in/out.
• 7.8 Two Way Talk: Press and hold the 📱 key to enter two-way talk mode. A microphone icon 🎤 will appear on the LCD. Release the key to stop. The parent unit speaker is muted during two-way talk.

8. Menu Operation

8.1 Pairing the Camera and Parent Units

The baby unit is pre-registered. To re-register or register a new baby unit:

8.1.1 Add Camera

1. Press MENU key.
2. Use navigation keys to highlight the camera icon 📸.
3. Press OK to enter sub-menu, then use navigation keys to select desired camera.
4. Press key to enter sub-menu, then press 🔍 key.
5. When the icon 📸 is displayed, press the PAIR button on the back of the camera.
6. A successful pairing icon ✔ will show on the LCD.
7. If pairing fails, repeat the steps.

8.1.2 Delete Camera

1. Press MENU key.
2. Use navigation keys to highlight the camera icon 📸.
3. Press OK to enter sub-menu, then use navigation keys to select the camera to delete.
4. Press key to enter sub-menu, then press ✔ key.
5. Press key to select the delete icon ❌.
6. Press OK to confirm.

8.2 Volume

1. Press MENU key.
2. Use navigation keys to highlight the Volume icon 🔊.
3. Press OK to enter sub-menu.
4. Use ◀ / ▶ keys to select volume level from 1 to 5.

8.3 Display Brightness

1. Press MENU key.
2. Use navigation keys to highlight the brightness icon 💡.
3. Press OK to enter sub-menu.
4. Use navigation keys to select brightness level from 1 to 5. (Default is level 3.)

8.4 Temperature Unit Setting

1. Press MENU key.
2. Use navigation keys to highlight the temperature icon 🌡.
3. Press OK to enter sub-menu.
4. Use ◀ / ▶ keys to select °F or °C.
5. Press OK to confirm.
6. Press ⏎ key to Exit.

Note: The detected temperature range is 0~40 °C.

8.4.1 Temperature Alarm Setting

1. Press ⏎ key to select 🔔 for turning on alarm function; Press ⏎ key to confirm.
2. Press ◀ / ▶ key to select ⏻ for turning off alarm function; Press ⏎ key to confirm.

8.4.2 Set Temperature Hi/Lo Alert Limits

1. Press ◀ / ▶ to select 🔥 / 🔴 for Hi/Lo limits settings.
2. Press navigation keys to adjust the Hi limit when 🔥 is selected.
3. Press navigation keys to adjust the Lo limit when 🔴 is selected.

Note: High temperature alarm default is 36°C, low temperature alarm default is 8°C. The temperature icon turns red when limits are exceeded. Beeps will alert the user. Press any key to stop alarms.

8.5 Lullaby Setting

Soothe your baby with lullabies from the camera unit.

1. Press MENU key.
2. Use navigation keys to highlight the lullaby icon 🎶.
3. Press OK to enter sub-menu.
4. Use navigation keys to select one of 8 available lullabies, playback options (single, loop), or stop.
5. Press OK to confirm.

Note: Lullaby default setting is OFF.

8.6 Feeding Timer

1. Press MENU key.
2. Use navigation keys to highlight the alarm icon 🔔.
3. Press OK to enter sub-menu, then use navigation keys to select the desired alarm time.
4. Press OK to confirm.
5. Press ⏎ key to Exit.

Note 1: Minimum setting is 0.5 hour, maximum is 7 hours (9 levels).

Note 2: Alarm icon 🔔 displays when the alarm is on.

Note 3: Alarm default setting is OFF.

Note 4: Press any key on the parent unit to turn off a ringing alarm.

Note 5: If the alarm is not turned off, it will ring for 1 minute, then repeat twice more with a 3-minute interval. After three cycles, the alarm stops.

8.7 Sleep Mode

This mode controls the sound activation (VOX). If no sound is detected for 30 seconds, audio transmission stops, and the parent unit screen turns off. When sound is detected, transmission resumes, and the screen turns on.

To change VOX level:

1. Press MENU key.
2. Use navigation keys to highlight the VOX icon 🔊.
3. Press OK to enter sub-menu, then use navigation keys to select the desired level.
4. Press OK to confirm.
5. Press ⏎ key to Exit.

Note: 🔊 is Low sensitivity (requires more sound), 👂 is middle sensitivity, 🔊 is High sensitivity (requires less sound).

8.8 Date Setting

1. Press MENU key.
2. Use navigation keys to highlight the date icon 📅.
3. Press OK to enter sub-menu, then use navigation keys to select Year, Month, and Day.
4. Use ➕ / ➖ to set the Month, Day, and Year.
5. Press ⏎ key to Exit.

8.9 Time Setting

1. Press MENU key.
2. Use navigation keys to highlight the time icon 🕓.
3. Use navigation keys to select 12H or 24H format. For 12H, select AM or PM.
4. Use ➕ / ➖ to set the Hour.
5. Use ➕ / ➖ to set the Minute.

9. Technical Data

10. Trouble Shooting

11. Maintenance

• Clean with a slightly damp or anti-static cloth.
• Never use cleaning agents or solvents.

12. Disposal Guide for Battery and Product

• Do not attempt to repair or adjust electrical or mechanical functions.
• Dispose of the product in an environmentally responsible way. Take it to designated collection points or contact the store where purchased.

Improper battery use can cause corrosion or leakage, leading to personal injury or property damage. Use only specified battery types.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer's Instructions.

• Disposing of a battery in fire, hot over, or crushing/cutting can cause an explosion.
• Leaving a battery in high temperatures can cause explosion or leakage.
• Low air pressure may cause explosion or leakage.
• Do not expose the battery to excessive heat (sunshine, fire).

FCC & ISDE Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any received interference. Changes or modifications not expressly approved by the responsible party may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. However, no guarantee that interference will not occur in a particular installation.

To correct interference: Reorient or relocate the receiving antenna; Increase separation between equipment and receiver; Connect to a different circuit; Consult dealer or technician.

This device meets exemption from routine evaluation limits in section 2.5 of RSS 102 and complies with RSS 102 RF exposure. Canadian users can obtain RF exposure and compliance information.

This equipment complies with Canada radiation exposure limits for an uncontrolled environment.

Radiation Exposure Statement for camera: Install and operate with minimum distance 20cm between radiator and body.

SAR Statement for Monitor: This Monitor meets government requirements for radio wave exposure. Guidelines are based on independent scientific organizations' evaluations. Standards include a safety margin for all persons. ISED RF Exposure Information: SAR limit is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with 0mm separation from the body. Use accessories maintaining 0mm separation. Avoid accessories with metallic components.

EU Declaration of Conformity (DOC): Videotimes declares this radio equipment complies with RED Directive 2014/53/EU. Full text available at: www.hellobaby.net.cn

Model: HB40

Responsible Party (US): Startline LLC, 22 Hazelwood Drive, Jericho, NY 11753, Tel: 1-516-681-3729

Authorized UK Representative: APEX CE SPECIALISTS LIMITED, 89 Princess Street, M14HT, UK, info@apex-ce.com

Manufacturer: Shenzhen Videotimes Technology Co.,Ltd, Room 2106, Building 11, Tianan Yungu Phase II, Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong, China

Risk Group 1

WARNING IR emitted from this product. Do not stare at operating lamp

Product tested against EN62471

Warning

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft / 0.9m away). Do not remove this tag.

AVERTISSEMENT: DANGER D'ÉTRANGLEMENT: Des enfants se sont ÉTRANGLÉS avec des cordons électriques. Garde le cordon électrique hors de la portée des enfants (à plus de 0.9m/3 pi du lit d'enfant). Ne pas enlever cette étiquette.

Certifications: FC, CE, UK CA, RoHS, BC.

Made in China