Thermaltake H570 TG Mid Tower PC Case User Manual
Brand: Thermaltake
Model: H570 TG
Product Type: Mid Tower PC Case
Introduction
TT Premium: Thermaltake's premium product line, focusing on supreme quality, unique design, and high performance for PC enthusiasts. It represents a passion for DIY, Modding, and innovation in the PC hardware market.
Tt LCS-Liquid Cooling Support Certification: An exclusive Thermaltake certification for chassis that meet design and enthusiast standards for extreme liquid cooling configurations, ensuring optimal performance and fitment.
Join Tt Community: An invitation to join Thermaltake's Community Forums to receive user support, advice, updates on new products, and participate in contests.
Brand Websites & Social Media:
- Official Website: http://www.thermaltake.com/
- TT Premium: http://ttpremium.com/
- Global Facebook: https://www.facebook.com/ThermaltakeInc
- Taiwan Facebook: http://www.facebook.com/ThermaltakeTW
- Global Community Forums: http://community.thermaltake.com/
Contents
Chapter 1. Product Introduction
- 1.0 Specification
- 1.1 Accessory
- 1.2 Warning and Notice
Chapter 2. Installation Guide
- 2.0 Remove Components
- 2.1 Power Supply Unit (PSU) Installation
- 2.2 Motherboard Installation
- 2.3 HDD Installation
- 2.4 PCI Card Installation
- 2.5 Air Cooling Installation
- 2.6 AIO Liquid Cooling Installation
- 2.7 I/O Connection
- 2.8 Remove Filters
Chapter 1. Product Introduction
1.0 Specification
| Specification | Details |
|---|---|
| Model | H570 TG |
| Case Type | Mid Tower |
| Dimension (H*W*D) | 487 x 216 x 463.6 mm (19.2 x 8.5 x 18.3 inch) |
| Side Panel | Tempered Glass x 1 |
| Material | SPCC |
| Cooling System |
Front (intake): 120 x 120 x 25 mm ARGB fan (1000 rpm, 27.2 dBA) x 3 Rear (exhaust): 120 x 120 x 25 mm standard fan (1100 rpm, 22.5 dBA) x 1 |
| Drive Bays | 2 x 3.5", 2 x 2.5" or 4 x 2.5" |
| Expansion Slots | 7 |
| Motherboards | 6.7" x 6.7" (Mini ITX), 9.6" x 9.6" (Micro ATX), 12" x 9.6" (ATX), 12" x 13" (E-ATX) |
| I/O Port | USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, LED Button x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support |
Front: 3 x 120 mm, 2 x 120 mm, 1 x 120 mm 3 x 140 mm, 2 x 140 mm, 1 x 140 mm 2 x 200 mm, 1 x 200 mm Top: 3 x 120 mm, 2 x 120 mm, 1 x 120 mm 2 x 140 mm, 1 x 140 mm Rear: 1 x 120 mm |
| Radiator Support |
Front: 1 x 360 mm, 1 x 240 mm, 1 x 120 mm 1 x 280 mm, 1 x 140 mm Top: 1 x 360 mm, 1 x 240 mm, 1 x 120 mm 1 x 280 mm, 1 x 140 mm Rear: 1 x 120 mm |
| Clearance |
CPU cooler height limitation: 160 mm VGA length limitation: 375 mm PSU length limitation: 180mm |
1.1 Accessory
| Figure | Parts Name | Q'ty | Used for |
|---|---|---|---|
| [standoff] | Stand-off #6-32 x 6.5mm | 2 | Motherboard |
| [screw] | Screw #6-32 x 6mm | 4 | Power |
| [screw] | Screw M3 x 5mm | 24 | SSD/2.5" HDD / Motherboard |
| [screw] | Screw #6-32 x 10mm | 4 | 3.5" HDD |
| [screw] | Screw M3 x 10mm | 4 | SSD/2.5" HDD |
| [rubber washer] | HDD / SSD Rubber | 4 | 3.5" HDD / 2.5" HDD |
| [standoff] | Net Setter | 1 | Motherboard Stand-off |
| [screw] | Screw Ø5 x 10mm | 4 | Case Fan |
| [standoff] | Spacer Support 6.5mm | 1 | E-ATX Motherboard |
| [cable tie] | Cable Tie | 5 | Cable Management |
| [buzzer] | Buzzer | 1 | Motherboard Alarm |
1.2 Warning and Notice
Chassis Dimensions
Diagram showing the external dimensions of the chassis: 455mm (Width) x 487mm (Height) x 463.6mm (Depth). Internal dimensions are approximately 216mm (Width) and 470mm (Depth).
Motherboard Compatibility
Diagram illustrating motherboard compatibility zones within the chassis. Supported formats include ITX, mATX, ATX, and E-ATX (up to 330.2mm wide). A clearance of 56mm is indicated between the motherboard and the top panel.
CPU Cooler Height Limitation
Diagram showing the maximum CPU cooler height limitation, indicated by an arrow pointing to 160mm.
VGA Length Limitation
Diagram showing the maximum VGA length limitation, indicated by an arrow pointing to 375mm.
Chapter 2. Installation Guide
2.0 Remove Components
Diagram illustrating the removal of the side panel. Arrows indicate the panel slides outwards and then can be detached.
2.1 Power Supply Unit (PSU) Installation
Diagram showing the installation of a Power Supply Unit (PSU) into the PSU bay at the bottom of the chassis, secured with four screws.
2.2 Motherboard Installation
Diagram showing the installation of a motherboard onto the standoffs within the chassis, secured with nine screws.
2.3 HDD Installation
3.5" HDD Installation: Diagram for 3.5-inch HDD installation. Option A uses screws (#6-32 x 10mm) with rubber dampeners. Option B uses a tool-less HDD tray. Both methods use four screws or mounts.
SSD / 2.5" HDD Installation: Diagram for SSD/2.5-inch HDD installation. Option A uses screws (M3 x 10mm) with rubber dampeners. Option B and C use screws (M3 x 5mm). All methods use four screws.
2.4 PCI Card Installation
Diagram showing the installation of a PCI expansion card into the expansion slots at the rear of the chassis.
2.5 Air Cooling Installation
Diagram illustrating fan mounting options. The chassis supports fans in the following locations and sizes:
- Front: Supports up to three 120mm, three 140mm, or two 200mm fans.
- Top: Supports up to two 140mm or three 120mm fans.
- Rear: Supports one 120mm fan.
2.6 AIO Liquid Cooling Installation
Diagram illustrating All-In-One (AIO) liquid cooler radiator mounting options. The chassis supports radiators in the following locations and sizes:
- Top: Supports one 280mm or 360mm radiator.
- Front: Supports one 360mm or 280mm radiator.
- Rear: Supports one 120mm radiator.
2.7 I/O Connection
Diagram detailing the front panel I/O connections. The following connectors are available:
- RESET Switch
- USB 2.0 ports
- USB 3.0 ports
- Power Switch / Power LED / HDD LED connectors
- RGB Switch: A long press on the RGB button for 3 seconds will cause the fans to blink twice, indicating they are now controlled by motherboard software.
- HD Audio connector
2.8 Remove Filters
Diagram showing the removal of dust filters located at the top and bottom of the chassis.
Thermaltake Global
