Thermaltake Ceres 330 TG ARGB Mid Tower Chassis
User Manual and Installation Guide
TT Premium
To continue achieving the corporate mission of delivering the perfect user experience, Thermaltake developed TT Premium with the essence of combining supreme quality products with a new logo design. TT Premium is far more than just a guarantee of quality. Behind the name it represents the passion in DIY Modding and Thermaltake's desire to be the most innovative brand in the PC hardware market. To satisfy the demand of the high-end PC users, TT Premium follows its core values of Excellent Quality, Unique Design, Diverse Combinations and Boundless Creativity to provide a high-performance PC product for every enthusiast.
Visit the TT Premium website: http://ttpremium.com
Chapter 1. Product Introduction
Tt LCS-Liquid Cooling Support Certification
Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardware enthusiast standards that a true LCS chassis should behold. The Tt LCS Certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Join Tt Community To Receive Benefits
Dear Valued Customer, Thank you for choosing Thermaltake. As a new user, we value your thoughts and opinions, and your feedback is important to us. We at Thermaltake would like to use this opportunity to invite you to join our Community Forums. Register today to start enjoying the full benefits of our community.
Benefits of being a member:
- Quick and responsive user support
- Receive help and advice with new builds
- Keep up to date with new product releases
- Share your thoughts and builds with the community
- Enter monthly contests and giveaways
Visit the global community forums: http://community.thermaltake.com
1.0 Specification
Case Type | Mid Tower |
Dimension (H*W*D) | 475 x 245 x 463 mm (18.7 x 9.65 x 18.23 inch) |
Side Panel Material | Tempered Glass x 1, SPCC |
Cooling System |
Front (intake): 2 x 140mm CT140 ARGB fan (1500rpm, 30.5 dBA) Rear (exhaust): 1 x 140mm CT140 fan (1500rpm, 30.5 dBA) |
Drive Bays | 1 x 3.5", 2 x 2.5" or 3 x 2.5" |
Expansion Slots | 7 (Rotatable Patented Design) |
Motherboards | 6.7" x 6.7" (Mini ITX), 9.6" x 9.6" (Micro ATX), 12" x 9.6" (ATX), 12" x 13" (E-ATX) |
I/O Port | USB 3.2 (Gen 2) Type C x 1, USB 3.0 x 2, HD Audio x 1 |
PSU Support | Standard PS2 PSU (optional) |
Fan Support |
Front: 3 x 120mm or 2 x 140mm Top: 3 x 120mm or 2 x 140mm Rear: 1 x 120mm or 1 x 140mm |
Radiator Support |
Front: 1 x 360mm, 1 x 240mm, or 1 x 280mm, 1 x 140mm Top: 1 x 240mm, 1 x 120mm, or 1 x 280mm, 1 x 140mm Rear: 1 x 120mm |
Clearance |
CPU cooler height limitation: 185mm VGA length limitation: 340mm (With Radiator), 370mm (Without Radiator) PSU length limitation: 220mm |
1.1 Accessory
Figure 1: Standard Accessories
- Screw #6-32 x 6 mm (for PSU): 4 pcs
- Screw M3 x 5 mm (for Motherboard / 2.5" HDD / SSD): 32 pcs
- Screw #6-32 x 6 mm (for 3.5" HDD Backup): 8 pcs
- Stand-off #6-32 x 6.5 mm (for Motherboard Stand-off): 3 pcs
- Net setter (for Case Fan Backup): 1 pc
- Screw 5 x 10 mm (for Motherboard Alarm): 4 pcs
- Thumb Screw #6-32 x 8 mm (for Cable Management): 2 pcs
- Buzzer (for Riser Cable): 1 pc
- Zip Ties (for Cable Management): 10 pcs
- Riser Cable Bolt (for Riser Cable): 2 pcs
Figure 2: Accessories for CT ARGB Version Only
- MB Signal Bridge Cable (for RGB Signal Sync - Asus/MSI/ASROCK/GIGABYTE compatible): 1 pc
- Fan Splitter (for Case Fan): 2 pcs
1.2 Warning and Notice
- CPU cooler max height: 185mm
- Motherboard Compatibility: ITX, mATX, ATX, E-ATX (Up to 330.2mm wide)
- VGA card max length: 370mm (340mm when a radiator is installed)
Chapter 2. Installation Guide
2.0 Remove Panels
2.1 Power Supply Unit (PSU) Installation
2.2 Motherboard Installation
2.3 3.5" & 2.5" HDD Installation
2.4 VGA Card Installation
2.5 Air Cooling Installation
- Front: Up to 2 x 140mm fans or 3 x 120mm fans
- Top: Up to 2 x 140mm fans or 3 x 120mm fans
- Rear: 1 x 120mm fan
2.6 AIO Liquid Cooling Installation
- Front: Up to 1 x 360mm or 1 x 280mm radiator
- Top: Up to 1 x 240mm or 1 x 280mm radiator
2.7 I/O Connection
2.8 ARGB Control Instruction
How to connect MB: