MOEN IVER™ Two-Handle Widespread Lavatory Faucet

Model: TV6820 Series

Description

  • Metal construction with various finishes identified by suffix.
  • 1/2" IPS connections.
  • Duralock™ quick connect system.
  • Includes pop-up waste assembly.

Operation

  • Cold side: Clockwise to open (counterclockwise to close).
  • Hot side: Counterclockwise to open (clockwise to close).
  • Lever-style handles.

Flow

  • Water usage is limited to maximum flow rates as indicated by corresponding product markings.
  • 1.0 gpm max (3.79 L/min) at 60 psi.

Cartridge

  • 1234™ Duralast™ cartridge.
  • Nonmetallic and stainless steel material.

Standards

  • Third-party certified to WaterSense®, ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein.
  • Certified to NSF 61/9 & 372.
  • Complies with California Proposition 65 and the Federal Safe Drinking Water Act.
  • Products are compliant with California water efficiency regulations.
  • ADA compliant for lever handles.

Warranty

  • Lifetime limited warranty against leaks, drips, and finish defects to the original homeowner.
  • 10-year limited warranty when used in a multifamily installation.
  • 5-year limited warranty when used in a commercial installation.
  • Visit www.moen.com/support for complete details and limitations.

Installation Notes

  • This faucet is designed to be installed through 3 holes, 1-1/8" minimum diameter.
  • For deck thickness 1-1/2" to 3", use service kit #175709.
  • Valves install through 1-1/4" diameter hole.

Diagram and Dimensions

A detailed diagram illustrates the faucet's dimensions and installation requirements. The top view shows the faucet requiring three mounting holes, with the two handles spaced 8 inches (204mm) apart. The side view details the faucet's height and reach: the spout stands 5-3/8 inches (135mm) tall, with handles positioned 4-7/8 inches (122mm) above the deck. The spout has a reach of 4-5/8 inches (118mm) from the faucet body center, and the handles are 1 inch (26mm) wide. The maximum deck thickness supported is 1-1/4 inches (32mm). The diagram also depicts the water supply connections and the pop-up waste assembly.

moen tv6820bzg spec sheet-etowejai6bxg SEAL Systems - PDF Tools 3.3.1.2 Adobe Illustrator(R) 24.0

Related Documents

Preview Moen IVER™ One-Handle Lavatory Faucet 6805 Series Specifications
Detailed specifications for the Moen IVER™ One-Handle Lavatory Faucet, model 6805 Series, including features, operation, flow rate, cartridge, standards, warranty, dimensions, and certifications.
Preview Moen Caldwell Two-Handle Widespread Lavatory Faucet Specifications
Detailed specifications for the Moen Caldwell two-handle widespread lavatory faucet, including features like Duralock™ installation, WaterSense® certification, ADA compliance, flow rates, and warranty information for models WS84440 and CA84440 series.
Preview Moen Two-Handle Widespread Lavatory Faucet Installation Guide
This guide provides detailed installation instructions, parts lists, and helpful tips for the Moen Two-Handle Widespread Lavatory Faucet (Model INS12070). It covers faucet and drain assembly, connection, and flushing procedures, along with warranty information.
Preview Moen Two-Handle Widespread Lavatory Faucet Installation Guide
Comprehensive installation instructions and parts list for the Moen Two-Handle Widespread Lavatory Faucet (Model INS12069). Includes step-by-step guidance, helpful tools, and warranty information.
Preview Moen IVER™ 6805 Series One-Handle Lavatory Faucet Illustrated Parts
Detailed illustrated parts list for the Moen IVER™ 6805 Series One-Handle Lavatory Faucet, including kit numbers, finishes, and part descriptions. Features components A through M with corresponding part numbers and finish options.
Preview Moen Avri™ Two-Handle Widespread Lavatory Faucet Illustrated Parts List
Comprehensive illustrated parts list for the Moen Avri™ Two-Handle Widespread Lavatory Faucet (Models 84154, 84154BL, 84154SRN). Find kit numbers, finishes, and ordering details for faucet components and waste assemblies.
Preview Moen Halle 4" Lavatory Faucet Illustrated Parts List
Illustrated parts list for the Moen Halle 4-inch lavatory faucet (Model 84971SRN), detailing components, part numbers, and assembly options for ordering and installation.
Preview Moen GENTA™ One-Handle Lavatory Faucet WS84760 Series Specifications
Detailed specifications for the Moen GENTA™ One-Handle Lavatory Faucet (Model WS84760 series), featuring durable metal construction, WaterSense certification, ADA compliant lever, and lifetime limited warranty.