MOEN IVER™ One-Handle Lavatory Faucet
Model: 6805 Series
Product Overview
This document provides specifications for the MOEN IVER™ One-Handle Lavatory Faucet, model 6805 Series.
The faucet features a modern, sleek design suitable for lavatory use.
Key Features
- Metal construction with various finishes.
- Flexible supply lines with 3/8" compression fittings.
- Includes a metal pop-up waste assembly.
- Optional 3-hole deck plate (escutcheon) is available.
Operation
- Lever style handle for easy operation.
- Temperature control is managed via a 100° arc of handle travel.
Flow Rate
Water usage is limited to a maximum flow rate of 1.0 gpm (3.79 L/min) at 60 psi, as indicated by product markings.
Cartridge Technology
- Utilizes ceramic disc technology for durability and performance.
- Constructed from non-metallic, non-ferrous, and brass materials.
- Features a single body construction for straightforward replacement.
Standards and Compliance
- Third-party certified to WaterSense®, ASME A112.18.1/CSA B125.1, and all applicable referenced requirements.
- Certified to NSF 61/9 & 372 standards.
- Products are compliant with California water efficiency regulations.
- Meets requirements of California Proposition 65 and the Federal Safe Drinking Water Act.
- ADA compliant for lever handle accessibility.
Warranty Information
- Lifetime limited warranty against leaks, drips, and finish defects, provided to the original homeowner.
- 10-year limited warranty when installed in a multifamily setting.
- 5-year limited warranty when installed in a commercial setting.
For comprehensive warranty details and limitations, please visit www.moen.com/support.
Installation Specifications
- Installs through a minimum 1-1/8" (28mm) diameter hole in the deck.
- Maximum deck thickness supported is 1-1/2" (38mm).
Dimensional Data
Overall Faucet Height: 7-3/8" (186mm)
Spout Height from Deck: 4" (102mm)
Spout Reach from Faucet Center: 4-3/8" (112mm)
Handle Arc Reach: 5-1/8" (130mm)
Mounting Pipe Diameter (as shown in diagram): 1-7/8" (49mm)
Certifications and Seals
[WaterSense certified]
[ADA compliant]
Certified by IAPMO R&T