Assembly Instructions

Notice

50% TIGHTEN BEFORE FIXING ALL BOLTS

Model Numbers: WF316578, WF316579, WF316580

Note, if you find any problems with the product, including rattan slack, breakage, assembly difficulties, etc, you can consult us for solutions.

General Notice

1. 50% Tighten before fixing all screws. Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again.
6. Note: If one or some screws are fully tightened during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.

Part List

• A: Right Frame (1 pc)
• B: Left Frame (1 pc)
• C: Back Frame (2 pcs)
• D: Seat Bench Frame (1 pc)
• E: Seat Stool Frame (1 pc)
• F: Stool Sheft Frame (1 pc)
• G: Side Stool (3 pcs)
• H: Right Side Stool (1 pc)
• I: Left Side Stool (1 pc)
• J: Arm Right Frame (1 pc)
• K: Arm Left Frame (1 pc)
• L: Canopy Frame L (1 pc)
• M: Canopy Frame M (1 pc)
• N: Canopy Frame N (1 pc)
• O: Canopy Frame O (1 pc)
• P: Canopy Frame P (2 pcs)
• Q: Canopy Frame Q (2 pcs)
• R: Right Bench Cushion (1 pc)
• S: Left Bench Cushion (1 pc)
• T: Right Stool Cushion (1 pc)
• U: Left Stool Cushion (1 pc)
• V: Pillow (4 pcs)
• W: Waterproof canopy (1 pc)
• X: Cover Cushion (2 pcs)

Hardware List

• 1: Bolt M6 x 55 mm (13 pcs + extra 2 pcs)
• 2: Bolt M6 x 35 mm (28 pcs + extra 2 pcs)
• 3: Bolt M6 x 25 mm (4 pcs + extra 1 pc)
• 4: Bolt M6 x 15 mm (33 pcs + extra 3 pcs)
• 5: M6 x 1 mm Washers (91 pcs + extra 3 pcs)
• 6: Eru M6 (13 pcs + extra 2 pcs)
• 7: M6 x 16 x5 mm Washers (8 pcs + extra 1 pc)
• 8: M10 x 25 x5 mm Washers (1 pc)
• 9: Spanner (1 pc)
• 10: Allen key M4 (2 pcs)
• 11: Allen key M4 (1 pc)
• 12: Feet cap M6 x 15 mm (18 pcs + extra 2 pcs)
• 13: Screw (4 pcs + extra 1 pc)
• 14: Gas Bar (2 pcs)
• 15: Keeper Plate (1 pc)
• 16: Keeper Plate (8 pcs)
• 17: Keeper Plate (5 pcs)

Carton Content

WF316578

• R x 1
• S x 1
• T x 1
• U x 1
• V x 2
• G x 3
• H x 1
• I x 1

WF316579

• D x 1
• E x 1
• F x 1
• L x 1
• M x 1
• N x 1
• O x 1
• P x 2
• Q x 2
• HARDWARE

WF316580

• A x 1
• B x 1
• C x 2
• V x 2
• J x 1
• K x 1
• W x 1
• X x 2

Assembly Steps

STEP 1

Connect Right Frame (A) & Back Frame (C) with Bolt (1), Eru (6) & Washers (5)

Parts used: A*1, C*1, Bolt (1)*3, Eru (6)*6, Washers (5)*3

STEP 2

Connect Left Frame (B) & Back Frame (C) with Bolt (1), Eru (6) & Washers (5)

Parts used: B*1, C*1, Bolt (1)*3, Eru (6)*6, Washers (5)*3

STEP 3

Connect part from Step 1 & part from Step 2 with Bolt (1), Eru (6) & Washers (5)

Parts used: Bolt (1)*3, Eru (6)*5, Washers (5)*3

STEP 4

Connect part from Step 3 & Keeper Plate (15) & Keeper Plate (16) with Bolt (4), Washers (5)

Parts used: Bolt (4)*6, Washers (5)*6, Keeper Plate (15)*1, Keeper Plate (16)*2

STEP 5

Connect part from Step 4 & Keeper Plate (17) with Bolt (4), Washers (5)

Parts used: Bolt (4)*10, Washers (5)*10, Keeper Plate (17)*5

STEP 6

Connect part from Step 5 & Seat Bench Frame (D) with Bolt (4), Washers (5)

Parts used: Seat Bench Frame (D)*1, Bolt (4)*5, Washers (5)*5

STEP 7

Connect part from Step 6 with Feet cap (12)

Parts used: Feet cap (12)*8

STEP 8

Connect part from Step 7 & Arm Right Frame (J) & Arm Left Frame (K) with Bolt (3), Washers (5)

Parts used: Arm Right Frame (J)*1, Arm Left Frame (K)*1, Bolt (3)*4, Washers (5)*4

STEP 9

Connect Canopy Frame (L) & Canopy Frame (M) with Screw (13)

Parts used: Canopy Frame (L)*1, Canopy Frame (M)*1, Screw (13)*1

STEP 10

Connect Canopy Frame (N) & Canopy Frame (O) with Screw (13)

Parts used: Canopy Frame (N)*1, Canopy Frame (O)*1, Screw (13)*1

STEP 11

Connect Canopy Frame (P) & Canopy Frame (Q) with Screw (13)

Parts used: Canopy Frame (P)*1, Canopy Frame (Q)*1, Screw (13)*1

STEP 12

Connect part from Step 9 & part from Step 10 & part from Step 11 with Waterproof Canopy (W)

Parts used: Waterproof Canopy (W)*1

STEP 13

Connect part from Step 8 & part from Step 12 with Bolt (2), Washers (5),(7)

Parts used: Bolt (2)*8, Washers (5)*8, Washers (7)*8

STEP 14

Connect part from Step 13 with Gas Bar (14)

Parts used: Gas Bar (14)*2

STEP 15

Connect Right Side Stool (H) & Left Side Stool (I) with Bolt (2), Washers (5)

Parts used: Right Side Stool (H)*1, Left Side Stool (I)*1, Bolt (2)*2, Washers (5)*2

STEP 16

Connect Seat Stool Frame (E) & Side Stool (G) with Bolt (2), Washers (5)

Parts used: Seat Stool Frame (E)*1, Side Stool (G)*1, Bolt (2)*2, Washers (5)*2

STEP 17

Connect part from Step 16 & Side Stool (G) with Bolt (1),(2) & Washers (5) & Eru (6)

Parts used: Side Stool (G)*1, Bolt (1)*2, Bolt (2)*2, Washers (5)*6, Eru (6)*2

STEP 18

Connect part from Step 17 & Side Stool (G) with Bolt (1),(2) & Washers (5) & Eru (6)

Parts used: Side Stool (G)*1, Bolt (1)*2, Bolt (2)*2, Washers (5)*6, Eru (6)*2

STEP 19

Connect part from Step 15 & part from Step 18 with Bolt (2), Washers (5)

Parts used: Bolt (2)*8, Washers (5)*8

STEP 20

Connect Stool Sheft Frame (F) & Keeper Plate (16) with Bolt (4), Washers (5)

Parts used: Stool Sheft Frame (F)*1, Keeper Plate (16)*6, Bolt (4)*6, Washers (5)*6

STEP 21

Connect part from Step 19 & part from Step 20 with Bolt (2),(4) & Washers (5)

Parts used: Bolt (2)*4, Bolt (4)*6, Washers (5)*10

STEP 22

Connect part from Step 21 with Feet Cap (12)

Parts used: Feet Cap (12)*10

STEP 23

Connect part from Step 14 & part from Step 22 with Washers (8)

Parts used: Washers (8)*1

STEP 24

Put on Right Bench Cushion (R) & Left Bench Cushion (S) & Right Stool Cushion (T) & Left Stool Cushion (U) & Pillow (V) to complete Daybed

Parts used: R*1, S*1, T*1, U*1, V*4

STEP 25

Cover the cushion with Cover Cushion (X) when not in use

Parts used: Cover Cushion (X)*1

Combination and Arrangement

Diagrams show different arrangements and the final assembled product.