Vessel Sink Technical Specifications
This document provides detailed dimensions and technical information for a vessel sink, as depicted in the provided technical drawings.
Overall Dimensions
The sink is oval in shape with the following main dimensions:
- Length: 585 mm
- Width: 390 mm
- Height (front): 175 mm
- Height (back): 140 mm
The base of the sink has a length of 385 mm and a width of 170 mm.
Drainage and Overflow Details
The sink features a central drain opening with a diameter of 70 mm (Ø70). The overflow hole has a diameter of 46 mm (Ø46).
A cross-section view (A-A) shows the depth of the sink bowl at the center to be 127 mm from the rim to the drain opening.
Mounting and Cut-out Information
A detailed view shows a cut-out section with specific angles and dimensions for installation. The angle is specified as less than or equal to 100 degrees (≤100°). Key dimensions in this detail include 63 mm and 45 mm, with an additional measurement of 22 mm indicated.
A top view indicates the placement of the drain (Ø70) within the oval basin, with a line labeled 'A' indicating a cross-section plane.
Additional Measurements
Other indicated measurements include a thickness of 13 mm at one edge and a height of 195 mm at the opposite edge of the basin.
Note: All dimensions are provided in millimeters (mm) unless otherwise specified.
