Vessel Sink Technical Specifications
This document provides detailed dimensional information for a vessel sink, essential for installation and design planning.
Overall Dimensions
The sink features an asymmetrical, egg-like shape with the following key measurements:
- Overall length: 470 mm
- Overall width: 297 mm (at its widest point)
- Overall height: 175 mm (at its highest point)
A detailed top view shows the overall length as 297 mm and a width of 173 mm at a specific point, with a total depth of 175 mm. The base of the sink has a width of 8 mm.
Bowl Dimensions and Features
The interior of the sink is designed with specific dimensions for functionality:
- Bowl depth (measured from the rim to the bottom): 112 mm
- Drainage hole diameter: ∅46 mm
- The bottom of the sink has a width of 315 mm.
A cross-section view (A-A) illustrates the bowl's profile and the placement of the drainage hole.
Base and Mounting Details
The base of the sink is designed for stability and mounting:
- Base width: 225 mm
- Base depth: 140 mm
- Overall height at the back: 160 mm
A detailed view of the mounting area shows a diameter of ∅70 mm for the drain, with specific angular and linear measurements indicating the slope and fit for installation: an angle of ≤100°, a measurement of 63, and a depth of 45.
Additional Views
The provided diagrams include a front view, a side view, a top view, a cross-section view (A-A), and a detailed view of the drainage area, all indicating key dimensions for precise installation and integration into bathroom designs.
