Vessel Sink Technical Specifications
Product Overview
This document provides detailed dimensional information for a vessel sink, essential for installation and design planning. The sink is designed for countertop placement and features a smooth, rounded profile.
Dimensional Drawings
The following describes the key dimensions presented in the technical drawings:
Top View and Side Profile
Top View: The sink has an overall diameter of 400mm. The drain hole is centrally located with a diameter of Ø70mm. There is a small offset of 8mm from the edge to the center of the drain hole, and a depth of 200mm from the top edge to the center of the drain.
[Diagram: Top view showing overall diameter, drain hole diameter, and offsets.]
Front and Side Elevations
Front Elevation: The sink has a width of 400mm and a depth of 390mm. The height from the base to the top rim is 145mm. The internal depth of the basin is 120mm.
[Diagram: Front elevation showing width, depth, and height.]
Side Elevation: Similar to the front elevation, showing a depth of 400mm and a width of 390mm. The height is 145mm, with an internal basin depth of 120mm.
[Diagram: Side elevation showing depth, width, and height.]
Cross-Section (A-A) and Detail View
Cross-Section (A-A): This view illustrates the internal profile of the sink basin. The internal depth is shown as 97mm from the rim to the lowest point of the basin. The bottom of the basin has a slight slope, indicated by an angle of less than or equal to 100 degrees (≤100°) at the junction with the vertical wall. The thickness of the basin wall at the bottom is approximately 45mm, with a 63mm measurement from the outer edge to the inner wall at the base. There is a 2mm chamfer or rounding at the base corner.
[Diagram: Cross-section showing internal depth, wall thickness, and base angle.]
Detail View: A magnified view of the base of the sink, highlighting the angle and thickness measurements.
[Diagram: Magnified detail of the sink base.]
Key Dimensions Summary
- Overall Width/Depth: 400mm
- Base Width/Depth: 390mm
- Overall Height: 145mm
- Internal Basin Depth: 120mm
- Drain Hole Diameter: Ø70mm
- Internal Depth to lowest point: 97mm
- Base wall thickness: 45mm
- Angle at base junction: ≤100°
Related Documents
 |
Vessel Sink Dimensions and Technical Specifications Detailed technical drawings and dimensions for a vessel sink, including overall measurements, cut-out details, and cross-section views. |
 |
Vessel Sink Dimensions and Technical Specifications Detailed dimensions and technical specifications for a vessel sink, including overall measurements, bowl depth, and drainage hole size. |
 |
30-Inch Stainless Steel Kitchen Sink Dimensions and Specifications Detailed dimensions and specifications for a 30-inch stainless steel kitchen sink, including bowl depth, drain opening, and overall measurements. Features a diagram illustrating the sink's layout and dimensions. |
 |
33-Inch Stainless Steel Kitchen Sink Specifications Detailed specifications and dimensions for a 33-inch wide stainless steel kitchen sink, including exterior and interior measurements, bowl depth, drain opening size, and minimum base cabinet requirement. |
 |
Pedestal Sink: Compact Dimensions for Small Spaces Detailed specifications for a compact pedestal sink, ideal for small spaces. Features include dimensions, item weight, size, and material. |
 |
Stainless Steel Sink Dimensions and Specifications Detailed dimensions and specifications for a stainless steel sink, including length, width, depth, and minimum cabinet requirements. Features compatibility with garbage disposal units. |
 |
Stainless Steel Double Bowl Kitchen Sink Specifications and Faucet Dimensions Detailed specifications for a 33-inch wide stainless steel double bowl kitchen sink, including exterior and interior dimensions, bowl depth, drain opening size, and minimum base cabinet requirements. Also includes dimensions for a compatible faucet. |
 |
Modern Porcelain Sink with Single Right-Side Faucet Hole A versatile porcelain sink designed for modern living, featuring a 20-inch width, 9-inch depth, 8.25-inch height, and a single right-side faucet hole. This medium-sized sink is ideal for contemporary bathrooms. |