Important Safety Information
Electrical Circuit Warning: Products equipped with electronic ballasts or drivers must not be installed on the same electrical circuits as products with inductive loads, such as magnetic fluorescent luminaires, motors, or ventilators. Inductive loads can generate excessive voltage surges that may damage electronic ballasts.
Energy Efficiency: This product contains a light source of energy efficiency class D, according to Regulation (EU) No 2019/2015.
Light Source Replacement: The light source in this luminaire shall only be replaced by the manufacturer, their service agent, or a similarly qualified person.
Wiring Conventions:
- Live (Phase): Typically Brown / Red
- Neutral: Typically Blue / Black
- Earth: Typically Green / Yellow
Usage: For ceiling use only.
Assembly Instructions
Before you begin: Ensure power is turned off at the source.
(Instruction also provided in French, Italian, and German: 'Turn off power / Couper le courant! / Spegnere la corrente! / Strom Abshalten!')
-
Prepare the electrical connection point.
Step 1: Shows an electrical connection box with terminals. Text indicates: 'Turn off power!' -
Attach the ceiling bracket (A) to the ceiling using the provided screws (A) and wall plugs (B).
Step 4: Illustrates mounting the ceiling bracket (A) to the ceiling using screws (A) and wall plugs (B). -
Connect the pendant's wiring to the ceiling supply. Ensure correct polarity and secure connections. A warning symbol (X) indicates an incorrect connection, and a checkmark (✓) indicates a correct connection.
Step 5: Shows a detail of wiring connection, with wires connecting to terminals. Includes a warning symbol (X) for incorrect connection and a checkmark (✓) for correct connection. -
Mount the pendant body to the ceiling bracket. Arrows indicate vertical movement for adjustment.
Step 3: Shows the pendant body being attached to the ceiling mount, with arrows indicating vertical movement. -
Attach the ceiling rose (B) to the ceiling bracket (A) by twisting it into place.
Step 6: Illustrates attaching the ceiling rose (A) to the mounting bracket (B) with a circular arrow indicating a twisting motion. -
Attach the glass shade (C) to the pendant body using the provided screws.
Step 7: Shows the process of attaching the glass shade (C) to the pendant body using screws. -
The installation is complete. The final product is shown.
Step 8: Displays the final assembled Nara Pendant light fixture.
Optional Glass Shades: Different glass shade styles are available separately for customization.
