Minima Adjustable Round
By Astro
Safety and Preparation
Please read these instructions carefully before commencing assembly.
Important: Ensure the power is turned off at the mains supply before starting any electrical work.
Electrical Wiring Guide:
- Live wire: Typically Brown or Red
- Neutral wire: Typically Blue or Black
- Earth wire: Typically Green or Yellow
This fixture is intended for ceiling installation only.
A cutout of Ø76mm (3 inches) is required in the ceiling for installation.
Diagram Description: A warning symbol [!] is shown next to diagrams illustrating electrical connections and the required ceiling cutout size.
Installation Steps
Turn off power.
Diagram Description: Illustration of a junction box with electrical wires connected to terminals labeled L (Live), N (Neutral), and A (Earth).
Prepare the ceiling cutout.
A 76mm (3 inch) diameter hole is required in the ceiling.
Diagram Description: Illustration of a drill with a hole saw attachment, indicating the required 76mm (3 inch) cutout diameter.
Connect the driver unit.
The light fixture includes a separate electrical driver unit.
Diagram Description: Illustration showing the light fixture connected to its separate electrical driver unit via a cable.
Wire the fixture.
Open the cover of the electrical driver unit.
Diagram Description: Illustration showing the cover of the electrical driver unit being opened.
Connect the Live, Neutral, and Earth wires to the appropriate terminals on the connection block within the driver unit.
Diagram Description: Illustration of a terminal block with inputs for Live (Brown/Red), Neutral (Blue/Black), and Earth (Green/Yellow) wires.
Ensure the wires are correctly inserted into the terminal block.
Diagram Description: Illustration showing the electrical wires correctly inserted into the terminal block.
Mount the fixture base.
Feed the connected wires through the prepared ceiling cutout.
Mount the fixture's base to the ceiling.
Diagram Description: Illustration showing the light fixture being inserted into the ceiling cutout, with wires passing through. Arrows indicate upward insertion.
Connect the light fitting.
Connect the light fitting to its cable, which is attached to the driver unit.
Diagram Description: Illustration depicting the connection of the light fitting to its cable.
Attach the light fitting.
Secure the light fitting to the main ceiling canopy.
Diagram Description: Illustration showing the light fitting being attached to the main ceiling canopy.
