Astro Minima Round Recessed Downlight Installation Guide
Brand: Astro
Important Safety Information
Please read the instructions carefully before commencing assembly.
Electrical Connections:
- Live (Phase): Normally Brown / Red
- Neutral: Normally Blue / Black
- Earth (Ground): Normally Green / Yellow
[electrical shock hazard] Warning: Not suitable for covering with thermal insulation.
[electrical shock hazard] Warning: Not suitable for mounting in flammable materials, e.g. wood.
Installation Instructions
Step 1: Power Off
Ensure the power supply is turned off before starting any electrical work. [power-off symbol]
Diagram Description: An illustration shows a terminal block with multiple connection points, indicating where wires will be connected. Text reads "TURN OFF POWER".
Step 2: Prepare Ceiling Opening
Cut a circular opening in the ceiling. The required diameter is 76mm (3 inches).
Diagram Description: An illustration depicts a hole saw cutting a precise circular opening in a ceiling surface. The diameter is clearly marked as 76mm / 3 inches.
Step 3: Connect Wiring
Connect the fixture's wiring to the mains supply using the provided connector block. Ensure correct polarity.
Diagram Description: An illustration shows the downlight fixture's wires being connected to the mains supply via a connector block. Arrows guide the connection process.
Step 4: Attach Mounting Brackets
Secure the mounting brackets (A and B) to the downlight fixture housing as shown.
Diagram Description: Two diagrams illustrate the attachment of mounting brackets, labeled A and B, to the main body of the downlight fixture. Arrows indicate the correct placement and securing method.
Step 5: Terminal Block Details
The terminal block facilitates connections for Earth, Neutral, and Live wires. Refer to the color coding:
- Earth/Terre/Terra/Erde: Green/Yellow
- Neutral/Neutre/Neutro/Nulleiter: Blue/Black
- Live/Phase/Fase: Brown/Red
Diagram Description: A detailed view of the terminal block is shown, with clear labels for each connection type (Earth, Neutral, Live) and corresponding wire color codes in multiple languages.
Step 6: Install Fixture
Insert the downlight fixture into the prepared ceiling opening. Secure it in place by tightening the screws.
Diagram Description: An illustration shows the downlight fixture being carefully pushed into the ceiling hole. An arrow indicates the insertion direction, and another points to a screw being tightened to secure the fixture.
Step 7: Clearance Requirements
Ensure adequate clearance around the installed fixture. A minimum of 150mm is required in all directions.
Diagram Description: A cross-section view shows the downlight installed in a ceiling. Minimum clearance distances of 150mm are indicated around the fixture, highlighting the space needed for ventilation and installation.
Tools and Accessories
Diagram Description: Illustrations show common tools used for installation: a hole saw, a screwdriver, and a drill.
