Safety Information
⚠ WARNING: Risk of Fire or Electrical Shock
- Installation must be performed by a licensed electrician.
- Always turn off power at the main panel before servicing.
- Disconnect power at the circuit breaker or disconnect switch before installation or servicing.
- Adhere to national and local electrical code requirements.
- Ensure proper grounding; this enclosure does not provide grounding between conduit connections. If metallic conduit is used, install grounding type bushings and jumper wire.
- Use #14-#8 AWG copper conductors ONLY, rated at least 75°C (167°F).
- Ensure no wire insulation is under the terminal plate; firmly tighten terminal screws.
- Do not remove the insulator covering terminals.
- Keep the door closed at all times when not servicing.
- Use this product with a 40A circuit breaker in the upstream.
Specifications
Input
120-240/277VAC, 60Hz. Detects voltage automatically (no DIP switch setting required).
Contact Ratings
- 40A Resistive: 120 to 277 VAC
- 30A General Purpose: 120 to 277 VAC
- 20A Resistive: 30VDC
- 1HP: 120 VAC; 2HP: 240VAC
- 20A Ballasted load: 120 to 277 VAC
- 15A Tungsten: 120 VAC; 5A Tungsten: 250VAC
- 800VA Pilot Duty: 120VAC; 720VA Pilot Duty: 240 VAC
- TV-5: 120VAC
System
- Wireless Type: 2.4GHz Only IEEE 802.11 b/g/n
- Wi-Fi Range: 80Ft (Free Area)
- APP: Smart Life (iOS 8.0 or higher, Android 4.1 or higher)
- Terminal range: #14-#8 AWG
- Operating temperature: -40°F to 149°F
Indicator Light Chart
| Name | Color | Status | Description |
|---|---|---|---|
| Power Indicator | Red | Solid | Input normal |
| No Light | Input abnormal | ||
| Load Indicator | Blue | Solid | Power is on |
| No Light | Power is off | ||
| Wi-Fi LED Indicator | Blue | Blinks rapidly | Resetting/Entering network configuration |
| Blinks slowly until off | Configuration is successful |
Installation
Mounting the Smart Box Timer
The timer box features five 1/2" to 3/4" combination knockouts. For 1/2" knockouts, the inner ring of the rubber plug should be cut. For 3/4" knockouts, the entire rubber plug should be removed. The box is mounted using three holes to mark the position on the surface before securing with screws.
Note: Ensure strong Wi-Fi signal. Wi-Fi range can be affected by obstructions. Mount the unit as close to the router as possible, in a vertical orientation. Always close the rainproof door after use.
Connecting the Wires
Lift the plastic insulator to expose the terminal strip. Wire according to the provided diagrams, ensuring the grounded wire is connected to the grounding terminal.
The terminal designations are L (Live), N (Neutral), NO (Normally Open), COM (Common Terminal), J (Jumper Wire), and T (Timer).
Smart Life APP Setup
Due to app updates, interfaces may vary; follow in-app instructions.
- Download the Smart Life APP: Search "Smart Life" on Google Play or the App Store.
- Open and Register/Log In: Create a new account or log in.
- Add Device: Tap the top right corner "+" and select "Socket Wi-Fi".
- Network Configuration: Choose your 2.4GHz Wi-Fi network and enter the password. (If 5GHz, set router to 2.4GHz).
- Pairing: Long press the program button on the smart box until the blue light flashes rapidly, then press "next" in the app.
Timer Function
Devices can be turned ON/OFF by pressing the power button on the smart box or by using the Smart Life APP.
Within the Smart Box control interface, users can select "Program", "Countdown", "Random", or "Repeat" modes.
Program Mode
Allows setting Start/End times for a 7-day period with 1-minute intervals. Each program repeats weekly.
Countdown Mode
Sets a countdown in hours and minutes. The smart box maintains its current state (on/off) until the countdown ends. Automatically terminates if the smart box is manually turned on/off.
Random Mode
Controls the device randomly within +/-30 minutes of the set ON/OFF time, simulating presence when away from home. Setting is similar to "Program" mode.
Repeat Mode
Sets the duration for ON and OFF cycles, with a start and end time. The schedule repeats between these times. For example, a pump could turn on for 5 minutes and off for 10 minutes between 6:00 AM and 11:30 AM on specific days.
Smart Home Integration
Work with Alexa
- Open the Alexa app, go to "Skills", search "Smart Life", and tap "Enable".
- Link your Smart Life account by entering credentials and selecting your country/region.
- Discover devices by saying "Alexa, discover devices" or by tapping "discover devices" in the Alexa app. Devices added in Smart Life app will appear.
- Note: If you change a device's name in the Smart Life app, Alexa needs to re-discover it.
Work with Google Home/ Google Assistant
Open the Google Home app, add a device in Home Control, select "Smart Life", and fill in login information to link the account. Your device will appear in the Home Control device list.
Share Your Device
The "Share Device" feature allows other users (family, friends) to control the smart outlet. Select the device, then press "Share Device" in the app.
Troubleshooting
- Why isn't my smart box connecting to the Smart Life app? Confirm signal strength and ensure connection to a secure 2.4GHz WiFi network during setup.
- My Smart Box is offline. Check for power/internet outages or router changes. Reset and reconfigure with the Smart Life APP.
- Amazon Alexa or Google Assistant can't find my app or discover my smart box timer. Ensure you are logged into the same Smart Life account in both apps. Confirm the wireless router is close enough to the smart box. Verify Alexa or Google Assistant is working correctly.
For other issues, contact customer support for professional solutions.
One Year Limited Warranty
Suraielec warrants this product to be free of defects in design, assembly, material, or workmanship for one year from the purchase date. For problems or questions, contact Consumer Care via E-mail: surai-tech@outlook.com.
