Fischer Variable Bracket PVB Series
This document outlines the Fischer Variable Bracket PVB series, a range of construction elements designed for channel systems.
Variable Bracket PVB
Construction elements - Variable bracket PVB
Image: A metal bracket with a base plate and multiple slots, designed for angular positioning of profile supports.
Image: The Variable Bracket PVB installed, showing its function in providing massive bracing for a cantilever arm.
Applications
- Variable angular positioning of profile support in the push-through system.
- Bracket for installation with FUS channels from 0° to 180°.
- For use in dry interior areas.
Advantages
- The design of the variable bracket PVB enables the fixation of mounting channels at an angle of 0° to 180°.
- The holes in the connecting element make it compatible with the push-through connector PFCN.
- The punched holes in the base plate allow the direct fixing onto a wall, ceiling or onto a mounting channel by screw or anchor.
Properties
- Material: steel DD11 (material no. 1.0332) acc. to DIN EN 10111
- Zinc plating: electro zinc-plated
Technical Data
| Item | Item no. | Sales unit [pcs] |
|---|---|---|
| PVB | 534960 | 5 |
Diagram: A dimensional drawing of the PVB bracket indicating key measurements: 152 mm, 190 mm, 50 mm, 59 mm, and an M12 hole.
Note: Refer to the push-through connector PFCN for load specifications.
Variable Bracket PVB zl
Construction element – Variable bracket PVB zl
Image: The Fischer Variable Bracket PVB zl, a construction element for channel systems.
Image: The Variable Bracket PVB zl installed, demonstrating massive bracing for a cantilever arm.
Applications
- Variable angular positioning of profile support in the push-through system.
- Bracket for installation with FUS channels from 0° to 180°.
- For indoor and outdoor application.
Advantages
- The design of the variable bracket PVB zl enables the fixation of mounting channels at an angle of 0° to 180°.
- The holes in the connecting element make it compatible with the push-through connector PFCN zl.
- The punched holes in the base plate allow the direct fixing onto a wall, ceiling or onto a mounting channel by screw or anchor.
Properties
- Material: steel DD11 (material no. 1.0332) acc. to DIN EN 10111
- Coating: zinclamella
Technical Data
| Item | Item no. | Sales unit [pcs] |
|---|---|---|
| PVB zl | 542722 | 5 |
Diagram: A dimensional drawing of the PVB zl bracket indicating key measurements: 152 mm, 190 mm, 50 mm, 59 mm, and an M12 hole.
Note: Refer to the push-through connector PFCN 41 zl for load specifications.
Variable Bracket PVB A4
Construction element - Variable bracket PVB A4
Image: The Fischer Variable Bracket PVB A4, a construction element for installation systems, made of stainless steel.
Image: A supported channel installation.
Image: The Variable Bracket PVB A4 installed, providing massive bracing for a cantilever arm.
Applications
- Variable angular positioning of profile support in the push-through system.
- Bracket for installation with FUS channels from 0° to 180°.
- For indoor and outdoor applications and in environments with high stress to components due to corrosion.
Advantages
- The design of the variable bracket PVB enables the fixation of mounting channels at an angle of 0° to 180°.
- The holes in the connecting element make it compatible with the push-through connector PFCN.
- The punched holes in the base plate allow the direct fixing onto a wall, ceiling or onto a mounting channel by screw or anchor.
Properties
- Material: stainless steel A4 (material no. 1.4401)
Technical Data
| Item | Item no. | Sales unit [pcs] |
|---|---|---|
| PVB A4 | 562838 | 5 |
Diagram: A dimensional drawing of the PVB A4 bracket indicating key measurements: 152 mm, 190 mm, 50 mm, 59 mm, and an M12 hole.
Note: Refer to the push-through connector PFCN 41 A4 for load specifications.
