Mount Pro Handlebar Clamp Mount Installation

Installation Steps

Follow these steps to correctly install your Handlebar Clamp Mount.

Step 1: Mount Attachment

Attach the mount using the provided M5 x 16mm screws. Ensure a torque of 2.5Nm. If M5 x 20mm screws are used, also tighten them to 2.5Nm.

Step 2: Optional Spacers

Utilize the optional 5mm spacers for height or angle adjustment as needed to achieve optimal positioning.

Step 3: Final Tightening

Ensure all screws are securely tightened according to the manufacturer's recommended torque specifications. Refer to your device or vehicle manual for specific torque values if unsure.

Step 4: Angle Adjustment

Adjust the mount to the desired viewing angle. The installation diagram indicates a minimum clearance of 15mm should be maintained.

Refer to the next page for further details or related information [Next Page].

Important Warnings

User Responsibility: You are responsible for inspecting all aspects of the product before use to ensure all components are present and undamaged. You are also responsible for inspecting all attachments before each use to ensure no adjustments are required and there is no damage.

This document includes warnings and instructions in multiple languages, including Czech, Danish, German, Spanish, Finnish, French, Hungarian, Italian, Japanese, Korean, Malay, Dutch, Norwegian, Polish, Portuguese, Swedish, Chinese, and Thai. All versions emphasize the user's responsibility for thorough product and attachment inspection prior to each use to guarantee proper function and prevent damage.