Fanttik NEX S1 Pro Cordless Screwdriver Kit
User Manual
Contents
1. Product Storage
Pop up and store the screwdriver: Press the screwdriver to pop-up from the storage box. Insert the screwdriver into the storage box and press down to lock.
Pop up and store the storage box: Press the storage box (curved top surface) to pop-up from the aluminum housing. Insert the storage box into the aluminum housing and press down to lock.
Storage of screwdriver bits: The 16 bits are attached in bit holder on the storage box and are attracted by magnet. Put bits back in place according to corresponding bit icons after use.
2. Product Overview
Components:
- 1. Protective Lid
- 2. Cordless Screwdriver
- 3. Storage Box
- 4. Screwdriver Bits
- 5. Aluminum Housing
Bottom view and Top view of the screwdriver are illustrated.
3. How to Use
Screwdriver power on/off
- Turn the torque knob from OFF to any desired level, then press the forward/reverse rotation button to start the screwdriver.
- Turn the torque knob to OFF to turn off the screwdriver.
Turn on/off the LED light
- The LED light turns on simultaneously when the screwdriver is turned on.
- The LED light will stay on for 10 seconds without any operation.
- The LED light will turn off when the torque knob is turned to OFF.
Forward/Reverse rotation button
Press the Forward ◀️ /Reverse ▶️ rotation button to tighten or loosen a screw.
Torque knob
- Turn the knob to level 1 to set to low torque mode.
- Turn the knob to level 2 to set to medium torque mode.
- Turn the knob to level 3 to set to high torque mode.
Power Indicator
- When the battery level is below 20% in use, the indicator will rapidly blink red, and it will turn off in 5 seconds after the rotation button is released.
- When charging, the indicator will slowly blink white.
- When the battery is fully charged, the indicator will become solid white.
Battery charging
This screwdriver is equipped with a universal Type-C charging port and comes with a USB charging cable. Charger is not included, please use a 5V charger for charging.
4. Specifications
Product Name | Cordless screwdriver kit |
---|---|
Product Model | NEX S1 Pro |
Color | Deep grey |
Product dimension | 67×67×220 mm |
Screwdriver dimension | 184 × 35 mm |
Net Weight | 800g |
Max. Torque of level I | 1.5 Nm |
Max. Torque of level II | 3 Nm |
Max. Torque of level III | 4.2 Nm |
Max. hard torque | 6 Nm |
Max manual torque | 8 Nm |
Rotation speed (unloaded) | 220 RPM |
Battery capacity | 2000mAh/7.4Wh |
Charging Input | 5V/1A |
5. Screwdriver Bit Parameters
Bit Shank: 1/4-inch (6.3mm) hex shank
Bit Length: 20 inch (50 mm)
Bit Material: Coated S2 Steel
Bit list:
- Phillips: PH0, PH1, PH2
- Slotted: SL3, SL4, SL5
- Tamperproof Torx: TR10, TR15, TR20, TR25
- Internal Hex: H3, H4, H5, H6
- Square Recess: S1, S2
6. Attention
- Avoid moisture, dust, and drop.
- Do not store the product in extreme temperature environment.
- Stay alert, watch what you are doing and use common sense when operating. Do not operate while you are tired or under the influence of drugs, alcohol or medication.
- This product is not a toy and should not be used by kids under 5 years old.
- This product has built-in battery, do not throw it into fire and should be recycled by local laws and regulations.
- Do not dismantle the machine by yourself. Have your power tool serviced by a qualified repair person or contact us for advice.
7. Warranty Info
Your Warranty Includes
- 12-Month Coverage: Within 12 months of purchase, Fanttik will provide timely and effective online after-sales service. Fanttik will repair or replace any defective product due to manufacturing fault within the warranty period.
How to Return Your Fanttik Product
- Contact support@fanttik.com with your order number.
- If your purchase was fulfilled by Amazon, please use Amazon's 30-day return service.
Please visit the official website for Declaration of Conformity.
Company Information
METASEE LLC
5205 Broadway #634 Pearland Texas 77581
www.fanttik.com
support@fanttik.com
Made in China
CE FC ROHSIC