ÄNGESBYN Storage Table

Important Safety Information

⚠️ WARNING: This is a delicate table. Do not sit on the product.

⚠️ WARNING: Do not place heavy objects on this product. Maximum load: 10 kg (22 lb).

Parts and Tools Required

The following parts and tools are needed for assembly:

Tools:

• Screwdriver ?

Parts:

• 8x Screws (Part Number: 153280)
• 4x Brackets (Part Number: 153289)

Assembly Steps

Step 1: Attach Brackets to Legs

Take the four legs and attach one bracket (Part Number: 153289) to the top of each leg. The bracket should be positioned to face inwards, ready to support the tabletop.

[Diagram Description: Four legs are shown. A bracket is being attached to the top of each leg. A close-up shows the bracket fitting onto the leg's top surface.]

Step 2: Assemble Legs to Frame

Attach the four legs, now fitted with brackets, to the main wire frame of the storage table. Use 8 screws (Part Number: 153280) to secure each leg firmly to the frame. Ensure all screws are tightened.

[Diagram Description: The main wire frame of the table is shown. The four legs are being attached to the bottom of the frame using screws. A magnified view shows the screw being inserted into the leg and frame connection.]

Step 3: Insert Fabric Liner

Place the fabric liner into the assembled wire frame. The liner is designed to fit snugly inside the frame and has ties for securing it.

[Diagram Description: The assembled wire frame is shown. The fabric liner is being lowered into the frame. An arrow indicates the direction of insertion.]

Step 4: Secure Fabric Liner

Tie the fabric liner's straps to the upper part of the wire frame. There are four straps, and they should be tied securely to keep the liner in place and taut.

[Diagram Description: A close-up view shows hands tying one of the fabric straps into a knot around the top edge of the wire frame.]

Step 5: Attach Tabletop Support Brackets

Attach the remaining four brackets (Part Number: 153289) to the top rim of the wire frame. These brackets will provide support for the tabletop.

[Diagram Description: The storage unit with the liner secured is shown. Four additional brackets are being clipped onto the top edge of the wire frame. Close-up views show how the clips attach.]

Step 6: Place Tabletop

Carefully place the tabletop onto the assembled base. The tabletop rests on the four support brackets attached in the previous step.

[Diagram Description: The assembled storage unit is shown. The round tabletop is being placed on top, with an arrow indicating downward placement onto the support brackets.]