PowerLite™ E24 Installation Guide

Contents

Confirm that your projector box includes these parts:

Connect the Projector

Choose one of the following connections. Refer to the following sections or the online User's Guide for details.

Computer

Computer 1 HDMI 1

Audio 1 L R

Audio 2

RS-232C Monitor Out Audio Out

Computer 2 Video

USB Cable

HDMI Cable

VGA Cable

Audio Cable

HDMI Port

Connect one end of an HDMI cable to the projector's HDMI port and the other end to a computer's HDMI port.

Computer Port

Connect one end of a VGA cable to one of the projector's Computer ports and the other end to your computer's monitor port. If you are using a laptop, configure it to display images on an external display (refer to the “Troubleshooting” section). You can also connect an audio cable.

USB Port

Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer.

Windows® 7 or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only required when connecting the projector for the first time). If the software screen does not appear automatically, open My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.

OS X 10.8.x or later: After turning on the projector, the USB Display software setup folder appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only required when connecting the projector for the first time). If the software screen does not appear automatically, double-click EPSON_PJ_UD, then double-click USB Display Installer.

Video Device

Connect various video devices and use the Source Search button on the projector or remote control to switch between them.

Computer 1 HDMI 1

Audio 1 L R

Audio 2

RS-232C Monitor Out Audio Out

Computer 2 Video

RCA Video Cable (composite video)

RCA Audio Cable

HDMI Cable

Using the Remote Control

Install the two AA batteries as shown below.

[Select Image Source] Choose the image source you want to project

[Power Button] Turns the projector on and off

[Menu Button] Opens the projector menus

[A/V Mute Button] Turns off the projector image

[Home Screen Button] Opens the projector's home screen

[Navigation Buttons] Navigate through the projector menus

For more information on using the remote control, refer to the online User's Guide.

Turning On Your Equipment

1. Connect the projector. The projector's power indicator lights up blue.
2. Fully open the A/V Mute sliding cover.
3. Press the power button on the projector or remote control. The Status indicator flashes blue, then stays lit.
   Note: To turn off the projector, press the power button twice.
4. When the home screen appears, use the arrow buttons on the projector or remote control to switch between projection sources and quickly access various options.
5. The default menu system language is English. To select another language, press the Menu button on the projector or remote control. Select Extended, select Language, then select your language. Press the Menu button to exit the menu system.
6. Turn on your computer or video source.

Adjusting the Image

1. If you do not see an image, press the Source Search button on the projector or remote control to select the image source.
   Note: If you still see a blank screen or have other display issues, refer to the “Troubleshooting” section.
2. To raise the image, press the locking mechanism and lift the front of the projector. Release the mechanism to lock the projector in the desired position.
3. To reduce or enlarge the image size, press the E-Zoom buttons on the remote control.
4. To make the image sharper, turn the focus ring.
5. If the image looks like this ? or this ?, the projector is not centered with respect to the screen and is tilted. Position the projector directly in front of the center of the screen; it should be perpendicular to the screen. If you cannot move the projector, use the horizontal keystone correction slider to correct the image shape.
6. If the image looks like this ? or this ?, use the projector's [Up Arrow] or [Down Arrow] button to correct it.

Troubleshooting

• If you see a blank screen, do the following:
  • Confirm that the A/V Mute sliding cover is open.
  • Check that the projector's Status indicator is lit blue and not flashing.
  • Press the power button or the A/V Mute button on the remote control to wake the projector from standby or sleep mode, if necessary.
• If you see a blank screen when the projector is connected to a computer, do the following:
  • In Windows, hold down the Windows key and press P at the same time, then click Duplicate.
  • If you are using a Mac laptop with macOS 13 or later, select System Settings > Displays. Select the projector, then choose the option to mirror your display from the Use As dropdown menu.
  • In macOS 12, select System Preferences > Displays > Display Settings. Select the projector, then choose the option to mirror your display from the dropdown menu.
  • In macOS 11 and earlier, open the System Preferences menu and select Displays. Click the Arrangement tab and select the Duplicate displays checkbox.
• If the projector does not respond to remote control commands, check that the remote control batteries are installed correctly. Replace them if necessary.

Registration

Scan the QR code to register your product and receive exclusive updates and offers.

Where to Get Help

Manuals

For information on how to use the projector, you can view or download manuals from the Epson website, as described below.

Internet Support

Visit http://latin.epson.com/support/ple24 to download software and utilities, view manuals, get answers to frequently asked questions and troubleshooting solutions, or contact Epson.

Telephone Support

You can speak with a technical support representative by calling one of the following phone numbers:

Argentina (54 11) 5167-0300 Mexico 800-087-1080
0800-288-37766 Cd. de México (52 55) 1323-2052
Bolivia* 800-100-116 Nicaragua* 00-1-800-226-0368
Chile (56 2) 2484-3400 Panamá* 00-800-052-1376
Colombia 01-8000-915235 Paraguay 009-800-521-0019
Bogotá 601 602-4751 Perú 0800-10126
Costa Rica 800-377-6627 Lima (51 1) 418-0210
Ecuador* 1-800-000-044 República
El Salvador* 800-6570 Dominicana* 1-888-760-0068
Guatemala* 1-800-835-0358 Uruguay 00040-5210067

*To call these toll-free numbers from mobile phones, please contact your local phone carrier.

If your country is not listed, please contact your nearest Epson sales office. Long-distance or local call charges may apply.

Optional Accessories

For a list of optional accessories available for your product, refer to the online User's Guide.

You can purchase accessories from an authorized Epson product dealer. To find the nearest one, visit http://latin.epson.com.

EPSON

EPSON is a registered trademark and PowerLite is a trademark of Seiko Epson Corporation. Mac, macOS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. Windows is a trademark of the Microsoft group of companies. 3LCD

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. ©2024 Epson America, Inc., 10/24 CPD-65260