Epson EB-PQ2213B/EB-PQ2216B/EB-PQ2216W/EB-PQ2220B Quick Reference

Connecting Your Projector

The diagram illustrates common connection cables and the projector's rear panel ports.

Cables:

• 3.5 mm mini-jack cable
• HDMI cable
• SDI cable
• Ethernet cable
• USB cable
• RS-232C cable

Projector Ports:

• Audio Out
• Remote
• RS-232C
• HDMI 1
• HDMI 2
• HDBaseT
• LAN
• USB-A (5V-2.0A)

Getting Started

Turning the Projector On

1. Turn on your computer or image source.
2. Remove the lens cover, if necessary.
3. Press the [power-on] button on the projector or the remote control. The projector is ready when the status light is solid blue.

Note: If the Direct Power On function is enabled, you can turn the projector on by simply plugging it in or flipping the switch controlling the outlet. See the online User's Guide for setup.

If your image does not appear, see "Switching Between Image Sources" or "Troubleshooting."

Note: Models EB-PQ2216B, EB-PQ2216W, and EB-PQ2220B require 220 V for full brightness. Using a 120 V source results in reduced brightness and potentially limited functionality. Refer to the online User's Guide for details.

Changing the Language of the Projector Menus

The default menu language is English. To change it:

1. Press the [menu] button to access the menu system.
2. Select Extended > Language.
3. Select your desired language.
4. Press the [menu] button to exit.

Image and Source Management

Switching Between Image Sources

Press the [search] button or a source button on the remote control, or use the Source Search button on the projector.

Diagram shows remote control and projector interface for selecting input sources like HDMI 1, HDMI 2, HDBaseT, SDI, LAN, and Port B.

Changing Screen Type

Set the Screen Type setting to match the screen's aspect ratio.

1. Press the [menu] button.
2. Select Extended > Display > Screen > Screen Type.
3. Select the screen's aspect ratio.

Note: The displayed image should match the screen's size and aspect ratio.

4. Press the [menu] button to exit.

Note: After changing the screen type, you may need to adjust the projected image's aspect ratio using the Aspect button on the remote control, depending on the input signal.

Adjusting Image Position

1. Press the [lens-shift] button on the remote control or the [lens] button on the projector.

Diagrams show remote control and projector buttons related to image adjustment, including Lens Shift, Geometry Calibration, Color Cal, and Lens controls.

2. Use the arrow buttons [up-arrow] [down-arrow] [left-arrow] [right-arrow] to adjust the projected image position.
3. Press the [esc] button to finish the adjustment.

If the projector is on a table, you can level the image by adjusting the projector's feet.

Zooming and Focusing

1. On the remote control, press the [zoom] or [focus] button.
2. On the projector, press the [lens] button repeatedly until the focus or zoom adjustment screen appears.

Diagram shows remote control buttons for Zoom and Focus with +/- controls.

2. Use the arrow buttons [up-arrow] [down-arrow] [left-arrow] [right-arrow] to make the adjustment.
3. Press the [esc] button to finish the adjustment.

Correcting Image Shape

If your image is uneven on the sides, use the projector's geometric correction features, such as Quick Corner® and H/V-Keystone. See the online User's Guide for details.

Making Other Image Adjustments

For advanced image quality adjustments, including color, position, and Edge Blending for multi-projector setups, consult the online User's Guide.

Powering Down and Troubleshooting

Turning the Projector Off

Press the [standby] button to turn the projector off. Confirm by pressing [standby] again if prompted.

Note: If Direct Power On is enabled, you can unplug the projector or switch off the outlet instead. See the online User's Guide.

Epson's Instant Off® technology allows immediate power-off without a cool-down period.

Troubleshooting

Blank Screen or No Signal Message

• Ensure the projector status light is solid blue (not flashing) and the lens cover is removed.
• Verify that all cables are connected correctly. Refer to the online User's Guide.
• Check the image source selection. See "Switching Between Image Sources." Ensure the source device is turned on.

Projector and Notebook Display Mismatch

• Windows®: Hold down the Windows key and press P simultaneously, then click Duplicate.
• Mac: On macOS 13.x or 14.x, select System Settings > Displays, then press the + pop-up menu button and choose a display to mirror. On macOS 12.x, select System Preferences > Displays > Display Settings, choose the projector, and select the mirror option. On macOS 11.x and older, open System Preferences > Displays, click the Arrangement tab, and select the Mirror Displays checkbox.

Support and Resources

Registration

Scan the QR code to register for product updates and exclusive offers. [QR code]

Where to Get Help

• Manuals: View or download online manuals from the Epson website for more information.
• Internet Support: Visit epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Latin America) for software, utilities, FAQs, and troubleshooting.
• Speak to a Support Representative: Contact Epson PrivateLine® Support at (800) 637-7661 (warranty period). For projector support specialists, call (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Latin America support details are in the online User's Guide. Support hours are 7 a.m. to 4 p.m. Pacific Time, Monday-Friday.
• Purchase Supplies and Accessories: Find authorized resellers by calling 800-GO-EPSON (800-463-7766). Purchase online at epsonstore.com (U.S.) or epsonstore.ca (Canada). For Latin America resellers, visit latin.epson.com. See the online User's Guide for a list of optional accessories.

Remote Control Map

This section details the functions of the remote control buttons.

• Turn the projector on: [power-on] button.
• Turn the projector off: [standby] button.
• Illuminate buttons temporarily: (Indicator next to standby)
• Switch image sources: [search] button or source buttons (HDMI 1, HDMI 2, HDBaseT, SDI, LAN, Port A, Port B).
• Display the Info menu: [i] button.
• Hide or display on-screen menus and messages: [On-Screen] button.
• Display the test pattern: [Test Pattern] button.
• Turn the Line Guide and Pattern Guide on or off: [Blend Guide] button.
• Open projector menus: [menu] button.
• Navigate through menu settings: Arrow buttons, [enter] button.
• Select menu settings: [enter] button.
• Temporarily turn off display and audio: (Implied by Shutter/Lens/Default group)
• Adjust the image size: [zoom] button with +/- controls.
• Adjust the image position: [lens-shift] button with +/- controls.
• Display Simple Blending menu: [Si Blend] button.
• Display Simple Stacking menu: [Si Stack] button.
• Display Screen Matching menu: [Sc Match] button.
• Open menus assigned by user: [User1], [User2] buttons.
• Display the projector ID and remote ID: [ID] button.
• Control one or multiple projectors: (Related to Multi-Projection menu)
• Split the screen between two inputs: [Split] button.
• Port to connect remote control cable: (Labeled port on remote).
• Adjusts color tone balance: [Uniformity] button.
• Freeze the image: [Freeze] button.
• Save and apply presets: [Memory] button.
• Select color modes: [Color Mode] button.
• Display the Multi-Projection menu: [Multi] button.
• Cancel current operation or return to previous menu: [menu] / [esc] button.
• Reset menu settings to their default value: [default] button.
• Adjust the focus: [focus] button with +/- controls.
• Correct image distortion: [distortion] button with +/- controls.
• Display the Geometry Correction screen: [Geometry Calibration] button.
• Adjust the lens calibration: [Lens Calibration] button.
• Control volume: [Volume] button.
• Display Color Calibration menu: [Color Cal] button.
• Use to enter numbers: Number buttons [0-9], [Num] button.
• Display the Home screen: [Home] button.

Legal Information

• EPSON, Instant Off, and Quick Corner are registered trademarks and the EPSON logo is a registered logomark of Seiko Epson Corporation.
• PrivateLine is a registered trademark of Epson America, Inc.
• Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
• HDBaseT is a trademark of the HDBaseT Alliance.
• Windows is a trademark of the Microsoft group of companies.
• General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
• This information is subject to change without notice.
• © 2024 Epson America, Inc., 1/24
• CPD-64105