SENCOR SDC 1200

User's manual

This manual provides instructions for operating the SENCOR SDC 1200 radio controlled clock with temperature.

Battery Assembling

Open the battery compartment cover. Insert 2xAAA batteries according to the correct polarity shown in the compartment. Once powering on, the clock will start RC signal searching automatically. Press the 'WAVE' button to stop the RC signal searching.

Manual Setting

Under normal displaying mode, hold down the 'MODE' button for seconds to enter into time setting mode. The setting digit will be flashing. Press the ▲ or ▼ button to adjust. The setting order is: 12/24hr format → time zone → hour → minute → year → month → date → language of week. Press the 'MODE' button to confirm the setting. If there is no operation in 30 seconds, it will turn to normal time displaying mode automatically.

Alarm & Snooze Setting

Under normal time displaying mode, hold down the ALARM ON/OFF button for seconds to enter into alarm setting mode. The setting digit will be flashing. Press the ▲ or ▼ button to adjust. The setting order is hour à minute. Press the ALARM ON/OFF button to confirm the setting. Press the ALARM ON/OFF button again to turn on the alarm function. An alarm icon ? will display on the screen. Press the ALARM ON/OFF button once more to turn off the alarm function. The alarm icon will disappear.

The alarm sound will last for 2 minutes and will change as follows:

• 0-10 seconds: BI per second
• 11-20 seconds: BI BI per second
• 21-30 seconds: BI BI BI per second
• >30 seconds: Keep BI

When the alarm ring is on, press the 'SNOOZE/LIGHT' button to turn off the alarm sound. The alarm icon ? will flash, and the alarm sound will be on again after 5 minutes. When the snooze function is on, press any other button to turn off the snooze function. When the alarm ring is on, press any other button to cancel the alarm sound. The alarm will be on again after 24 hours.

Press 'SNOOZE/LIGHT' to turn on the backlight. The backlight will last about 5 seconds.

Temperature

The indoor temperature will adjust within 3-8 minutes automatically after powering on. Press the ▼ button to change between °C/°F.

RC Signal

RC signal searching condition: The clock will start to search for the signal automatically when powering on or resetting. Press the 'WAVE' button to stop the RC signal searching. Under normal time displaying mode, press the 'WAVE' button to enter RC signal searching.

RC signal searching will start every day automatically. Automatic searching radio signal to adjust time occurs at: 1:00 am, 2:00 am, 3:00 am, 4:00 am, and 5:00 am. If the signal is received successfully once a day, the remaining radio signals on that day will be ignored. This process will be repeated every day. RC time searching will last 7 minutes.

RCC Receiving Icon:

• When signal received, RC icon ? will be flashing by “1HZ”;
• When signal is weak and adjusting for the right signal, the icon ? will be flashing by “1HZ” as well;
• When signal is successfully received, the LCD will display a completed RC icon ?, and exist RC searching.

7 Language Week Display

Instructions and Information Regarding the Disposal of Used Packaging Materials

Dispose of packaging material at a public waste disposal site.

Disposal of Used Electrical and Electronic Appliances

The symbol ?️ on the product, its accessory, or packaging indicates that this product shall not be treated as household waste. Please dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively, in some states of the European Union or other European states, you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing potential negative impacts on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union: If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union: This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

This product meets all the basic EU regulation requirements that relate to it.

Changes to the text, design, and technical specifications may occur without prior notice, and SENCOR reserves the right to make these changes.

Warranty Conditions

This product is warranted for a period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to customer goods using for common domestic use. The claim for service can be applied either at the dealer's shop where the product was bought, or at the below-mentioned authorized service shops. The end-user is obligated to set up a claim immediately when the defects appeared, but only till the end of the warranty period. The end-user is obligated to cooperate to certify the claiming defects. Only completed and clean (according to hygienic standards) products will be accepted. In case of an eligible warranty claim, the warranty period will be prolonged by the period from the date of claim application till the date of taking over the product by the end-user, or the date the end-user is obligated to take it over. To obtain service under this warranty, the end-user is obligated to certify their claim with duly completed following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows:

• Defects which were put on sale.
• Wear-out or damage caused by common use.
• The product was damaged by unprofessional or wrong installation, used in contrary to the applicable instruction manual, used in contrary to legal enactment and common process of use, or used for another purpose which it has not been designed for.
• The product was damaged by uncared-for or insufficient maintenance.
• The product was damaged by dirt, accident, or force majeure (natural disaster, fire, and flood).
• Defects on functionality caused by low quality of signal, electromagnetic field interference, etc.
• The product was mechanically damaged (e.g., broken button, fall).
• Damage caused by use of unsuitable media, fillings, expendable supplies (batteries), or by unsuitable working conditions (e.g., high temperatures, high humidity, quakes).
• Repair, modification, or other failure action to the product by an unauthorized person.
• End-user did not prove enough their right to claim (time and place of purchase).
• Data on presented documents differs from data on products.
• Cases when the claiming product cannot be identified according to the presented documents (e.g., the serial number or the warranty seal has been damaged).

Authorized service centers: Visit www.sencor.eu for detailed information about authorized service centers.