Tellur WiFi Smart Power Strip II
Model: TLL331521
Introduction
This user manual provides essential information regarding the Tellur WiFi Smart Power Strip II, model TLL331521. It is designed to offer convenient control over your electrical devices through WiFi connectivity and the Tellur Smart mobile application.
General Safety Precautions
Please adhere to the following safety guidelines to ensure safe operation:
- Read all instructions thoroughly before using the product.
- Keep this manual for future reference.
- Do not expose the power strip to water, moisture, or extreme temperatures.
- Ensure the total power consumption of connected appliances does not exceed the maximum rating of the power strip (2500W / 10A).
- Avoid overloading the power strip.
- This product is intended for indoor use only.
- Keep the power strip out of reach of children.
- Do not attempt to disassemble or repair the unit yourself.
Product Features and Specifications
The Tellur WiFi Smart Power Strip II (TLL331521) is equipped with advanced features:
- Connectivity: WiFi 2.4GHz
- Outlets: 3 AC sockets
- USB Ports:
- 1 x USB-C Port with Power Delivery (PD) up to 30W
- 1 x USB Port with Quick Charge (QC) up to 18W
- 2 x USB-A Ports with 2.4A output each
- Maximum Power: 2500W
- Maximum Current: 10A
- Cable Length: 2 meters
- Control: Via Tellur Smart App, voice assistants (e.g., Google Assistant, Amazon Alexa)
Smart Control with the Tellur Smart App
The Tellur Smart app allows for comprehensive management of your power strip:
Setup Process:
- Download and install the "Tellur Smart" application from the App Store or Google Play.
- Create a user account or log in if you already have one.
- Plug the power strip into a power outlet.
- Press and hold the power button on the strip for approximately 5 seconds until the indicator light flashes rapidly, indicating it is in pairing mode.
- Open the Tellur Smart app, tap the '+' icon to add a new device, and select "Power Strip (WiFi)".
- Follow the on-screen instructions to connect the power strip to your 2.4GHz WiFi network.
App Functionality:
- Remote Control: Turn individual outlets or all outlets on/off from anywhere.
- Scheduling: Set custom schedules for devices to turn on or off automatically.
- Timers: Configure countdown timers for specific actions.
- Voice Control: Integrate with voice assistants for hands-free operation.
Troubleshooting Common Issues
Problem: The power strip fails to connect to the WiFi network.
Possible Solutions:
- Ensure your WiFi network is operating on the 2.4GHz band, as 5GHz is not supported for initial setup.
- Verify that the WiFi password entered into the app is correct.
- Move the power strip closer to your WiFi router during the pairing process.
- Reset the power strip by holding the power button for 5 seconds to re-initiate pairing mode.
Problem: Connected devices are not functioning.
Possible Solutions:
- Check if the total power draw of connected devices exceeds the strip's maximum rating (2500W / 10A).
- Ensure each device is properly plugged into the power strip and the strip is powered on.
- Try plugging a known working device into the strip to test functionality.
Warranty Information
For detailed warranty terms and conditions, please refer to the warranty card provided with the product packaging.