TELLUR

Product Information

Compatible with Alexa Amazon and Google Assistant. This manual is available in more languages on smart.tellur.com.

Technical Specs

• Type: Straight filament
• Bulb color: Clear
• Voltage: 220-240V
• Power consumption: 6W
• Lumens +/-10%: 650lm
• Wireless frequency: 2.4GHz
• WiFi standard: IEEE 802.11b/g/n
• Beam angle: 360°
• Socket: E27
• Dimmable: Yes
• Light type: Warm / White
• Color temp.: 2200K-6500K
• Lifetime: 15000h
• Security: WPA-PSK / WPA2-PSK / WPA / WPA2 / WEP / WPS2/WAPI
• Encryption type: WEP/TKIP/AES
• Standby consumption: ≤0.3W
• CRI: Ra>80
• Working condition temperature: -5~45°
• Working condition humidity: ≤80%
• Compatibility: Devices with Android 4.1 / iOS 8 or higher
• Package includes: WiFi Smart Filament Bulb, User Manual
• Product dimensions: Ø60mm x 106mm

Tellur Smart App Setup

Download and install the Tellur Smart App for either iOS or Android devices.

[QR code for Tellur Smart App]

Available on the App Store

GET IT ON Google Play

Once downloaded, the app will ask you to register your device. Enter your email, select the country you live in and create a password for your Tellur Smart account.

Register

Country

E-mail adress

Continue

I agree with Service Agreement and Privacy Policy

Add device to Tellur Smart App

1. Select: + or Add Device
2. Select from list: Lighting and Lightning
3. Reset or Turn on the device

   If the light is blinking fast, skip the reset step.

   1. Power on
   2. Turn On-off-on-off-on (Subject to User Manual)
   3. Ensure light is fast blinking

   Attention: Please complete pairing process within 3 minutes after device reset.

   ? On/Off x3 ✔️

   Confirm indicator rapidly blink

4. Confirm or Configure the Wi-Fi network

   Enter Wi-Fi Password

   This app is supported only on 2.4GHz Wi-Fi channels [right arrow]

   Wi-Fi Name

   Change Network

   Password

   Confirm

5. Connecting the device

   Connecting Now

   Make sure your phone and device are as close to your router as possible.

   [Progress circle showing 14%]

   • Searching for Device
   • Registering device to the cloud
   • Initializing your Device

   This process should take less than 1 minute.

6. Select Done and enjoy your product

   Device added successfully

   Tellur Smart Bulb

   Done

Failed to add device?

Follow these troubleshooting steps:

1. Make sure the device is powered on.
2. Check the WiFi connection of your phone.
3. Check if the device is in pairing mode. Reset your smart device to enter pairing mode. Please refer to the "How to reset device" section below.
4. Check router or related: If you use a dual-band router, select the 2.4GHz network to add the device. You also need to enable the router's broadcasting function. Set encryption method as WPA2-PSK and authorization type as AES, or set both on "auto".
5. Check if the WiFi signal is strong enough. To maintain the signal strong, keep your router and the smart device as close as possible.
6. Wireless mode should be 802.11b/g/n
7. Make sure you don't exceed the maximum number of registered devices supported by the app (150).
8. Check if the router's MAC filtering function is enabled. If so, remove the device from the filter list and make sure the router is not prohibiting the device connection.
9. Make sure the WiFi password entered in the app is correct.

Connection Modes and Reset

EZ and AP connection modes:

Smart devices can be connected using two modes: EZ and AP. EZ represents the easiest way of connecting and enabling a smart device. You will need to have the device, active wireless network through with login password and Tellur Smart APP installed on a smartphone / tablet. AP mode can be used to configure and enable a smart device first with the smartphone / tablet and later on to the Wi-Fi network.

How to reset device?

Reset procedure for lighting devices -> Start by turning off the lights. Switch light following these exact steps: on-off-on-off-on (the time interval between switches should not exceed 10 seconds). When the lights are flashing, the device has been successfully reseted. If the light isn't flashing, repeat the steps above. When the lights flash quickly (4 times/second), the device is in EZ mode. If the lights flash slowly (2 times/3 seconds), the device is in AP mode. Under EZ mode, repeat the steps above until the light starts flashing slowly, indicating that the device has entered AP mode (and vice versa).

Advanced Setup and Integration

How to add device under EZ mode?

1. Make sure the LED indicator/light flashes quickly.
2. Make sure the phone is connected to WiFi.
3. Tap "Add device" in Tellur Smart app and enter the WiFi's network password.
4. In the device list, select the device you want to pair and add it.

How to add device under AP mode?

1. Make sure the LED indicator/light flashes slowly.
2. Tap "Add device" in Tellur Smart app and select "AP mode" from the top-right corner. Connect to the device's hotspot first and then proceed to connect it to the WiFi network.
3. Tap "Next" to add device.

Can I control device with 2G/3G/4G network?

When adding the device for the first time, the device and the phone need to be connected to the same WiFi network. Once the device has been successfully paired with Tellur Smart app, you can remotely control it via 2G/3G/4G networks.

How can I share my device with family?

Open Tellur Smart app, go to "Profile" -> "Device sharing" -> "Sharing sent", tap "Add sharing" and share the device with the added family members. Notice: users have to install the Tellur Smart app on their device in order to see shared devices.

How can I manage the devices shared by others?

Open the app, go to "Profile" > "Device sharing" > "Sharing received" where you can see the devices shared with other. Swipe left to delete shared devices.

Alexa integration

1. Go to Home menu on Alexa app.
2. Select "Skills" / "Skills & Games".
3. Type Tellur Smart in the search bar.
4. Select Tellur Smart and click "Enable" to activate Tellur Smart.
5. Enter your Tellur Smart account and password. Now you have finished the integration with Alexa.

Tellur Smart app is now skilled with Alexa and you can vocally control the devices added in Tellur Smart. Remember if you rename your smart devices, use a simple name that Alexa can recognize.

To control your smart devices through Alexa, use simple and concise voice commands. Here is an example for bedroom lighting:

• "Alexa, turn off bedroom light"
• "Alexa, turn on bedroom light"
• "Alexa, dim bedroom light"
• "Alexa, set bedroom light to red"

Google Home integration

Before using Google Home to control your devices, make sure you meet the following conditions:

• You have a Google Home device or an Android device with Google Assistant.
• You have the newest version of Google Home app.
• You have the newest version of Google app (Android only).
• The device display language is set to English US.
• You have the Tellur Smart app and a related account.

Add devices in Tellur Smart app (refer to app instructions) – you can skip this part if you have already added some devices to your Tellur Smart account. Make sure your devices' names are easily recognizable.

Link account in Home Control

1. Go to Google Home's homepage and tap "+".
2. Hit the "Add new" button, enter Tellur Smart in the search bar and select the app from the list. Next, select your Tellur Smart account's region, enter your Tellur Smart account and password, and tap "Link now". After you assign rooms for devices, your devices will be listed in the Home Control page.

Now you can control your smart devices through Google Home. Take bedroom light as example – the supported voice commands are as below:

• Ok Google, turn on/off bedroom light.
• Ok Google, set bedroom light to 50 percent.
• Ok Google, brighten bedroom light.
• Ok Google, dim bedroom light.
• Ok Google, set bedroom light to red.

Declaration of Conformity

We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest, Sector 1, Marinarilor street, nr. 31, we declare on own responsibility that the product below:

Does not endanger life, health, work safety, does not have a negative impact on the environment and corresponds to the standards stated in the manufacturer's declaration of conformity.

The product is compliant with the following standards and / or other normative documents:

LVD – 2014/35/EU

Applied standards: EN 62650:2012+A1:2015+A15:2019

EMC – 2014/30/EU

Applied standards: EN 55015:2013/A1:2015, EN 61547:2009, EN 61000-3-2:2019, EN 61000-3-3:2013+A1:2019

RoHS – 2011/65/EU

The product bears CE mark, applied in 2020

Name: George Barbu

Function: General manager

Place and date: Bucharest, 02-05-2018

Signed:

Disposal and recycling information

? The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment.

[CE mark] [FCC mark] [RoHS mark] ♻️