Tellur Smart Home Devices User Manual

Getting Started with the Tellur Smart App

To begin using your Tellur Smart devices, download and install the Tellur Smart App on your iOS or Android device from the App Store or Google Play.

Once downloaded, the app will prompt you to register. You can use your phone number or email address. Select your country. If you use a phone number, you will receive a registration code via text. If you use email, you will create a password.

Registration Steps:

1. Open the Tellur Smart App.
2. Tap "Register".
3. Enter your phone number or email address and select your country.
4. If using a phone number, enter the received registration code. If using email, create a password.
5. Sign in to the app.

Adding a New Device

Follow these steps to add a new Tellur Smart device:

1. Ensure the device is powered on and its indicator light is flashing quickly (this usually signifies it's ready for pairing).
2. Open the Tellur Smart App and tap the "+" icon to add a device.
3. Select the appropriate device type from the list.
4. Choose your Wi-Fi network and enter the password.
5. Once connected, the app will confirm the connection. You can then rename the device or tap "Done".

Connection Modes:

Tellur Smart devices can be connected using two modes: EZ and AP.

• EZ Mode: The easiest and quickest way to connect. Requires the device, an active Wi-Fi network with password, and the Tellur Smart App on your smartphone/tablet. The indicator light typically flashes quickly in this mode.
• AP Mode: Used for configuring and enabling a smart device first with your smartphone/tablet, and then connecting it to the Wi-Fi network. The indicator light typically flashes slowly in this mode.

How to Reset a Device:

• Heaters, Oil Heaters, etc.: Long-press the reset button for 5 seconds until the indicator light flashes. A fast flash (2 times/sec) indicates quick connect mode (EZ), and a slow flash (1 time/3 sec) indicates AP mode.
• Smart Lights/Switches: Turn off the device. Then, perform a sequence of ON-OFF-ON-OFF-ON (within 10 seconds). Flashing lights indicate a successful reset. A fast flash (4 times/sec) indicates EZ mode; a slow flash (2 times/3 sec) indicates AP mode. To switch between modes, repeat the ON-OFF sequence.

Integrating with Amazon Alexa

Control your Tellur Smart devices using voice commands with Amazon Alexa.

Steps to Sync:

1. Open the Alexa App and go to the Home menu.
2. Select "Skills".
3. Search for "Tellur Smart" or "Smart Life" (as indicated in the manual).
4. Select the skill and press "Enable".
5. Link your Tellur Smart account by entering your account credentials.

Once linked, you can control your devices. It's recommended to use simple, recognizable names for your devices (e.g., "Bedroom Light").

Example Voice Commands:

• "Alexa, turn off bedroom light."
• "Alexa, turn on bedroom light."
• "Alexa, dim bedroom light."
• "Alexa, set bedroom light to red."

Integrating with Google Home

Control your Tellur Smart devices using voice commands with Google Home.

Requirements:

• A Google Home device or Android phone with Google Assistant.
• Latest Google Home app and Google app (Android only).
• A Google account.
• Device display language set to English (US).
• Tellur Smart App installed with a registered account and devices added.

Steps to Link Account:

1. In the Google Home app, tap "Home Control" from the menu and then tap "+".
2. Find and select your region, then enter your Tellur Smart account credentials.
3. Tap "Link Now".

After assigning devices to rooms, they will appear in the Home Control page.

Example Voice Commands:

• "Ok Google, turn on/off bedroom light."
• "Ok Google, set bedroom light to 50 percent."
• "Ok Google, brighten bedroom light."
• "Ok Google, dim bedroom light."
• "Ok Google, set bedroom light to red."

Troubleshooting: Device Connection Issues

If you encounter problems adding a device, check the following:

• Device Power: Ensure the device is powered on.
• Wi-Fi Connection: Verify your phone is connected to Wi-Fi.
• Device Readiness: Make sure the device is in pairing mode (indicator light flashing). Refer to device-specific instructions if needed.
• Router Settings:
  • Use a 2.4GHz Wi-Fi network (dual-band routers).
  • Ensure the router's broadcasting function is enabled.
  • Set encryption method to WPA2-PSK and authorization type to AES (or Auto).
  • Avoid using only "11n" wireless mode.
  • Do not use Chinese characters in your Wi-Fi network name.
  • Keep the device and router within a reasonable distance for a strong signal.
  • Check if the maximum number of connected devices to your router has been reached.
  • Ensure the router's MAC filtering function is not blocking the device.
• Password: Confirm the Wi-Fi password entered in the app is correct.

Remote Control (2G/3G/4G): After initial setup on the same Wi-Fi network, you can control devices remotely using 2G/3G/4G networks.

Device Sharing

You can share control of your Tellur Smart devices with family members.

To Share a Device:

1. Open the Tellur Smart App.
2. Go to "Profile" > "Device Sharing" > "Sharings Sent".
3. Tap "Add Sharing" and follow the prompts to share with family members.

To Manage Shared Devices:

1. Open the Tellur Smart App.
2. Go to "Profile" > "Device Sharing" > "Sharings Received".
3. Here you can view devices shared by others, add remarks, or delete sharing permissions.

Disposal and Recycling Information (WEEE)

The crossed-out wheeled-bin symbol ?️ on your product, battery, or packaging indicates that electronic products and batteries must be taken to separate waste collection points at the end of their life. Do not dispose of them with normal household waste.

It is the user's responsibility to dispose of equipment using designated collection points or services for recycling waste electrical and electronic equipment (WEEE) according to local laws.

Proper collection and recycling help conserve valuable materials and protect human health and the environment. Improper handling or recycling can be harmful.