KUNGSFORS Wall Grid
This document provides assembly instructions for the KUNGSFORS wall grid by IKEA.
Important Note on Wall Mounting
NOTE! Screws or fittings to fix the furniture/object to the wall/ceiling are not included. Choose screws and fittings that are specially suited to the material in your wall/ceiling and have sufficient holding power. If you are uncertain, contact your local specialized retailer.
Assembly Steps
The following steps detail how to assemble and mount the KUNGSFORS wall grid. Ensure you have all necessary parts and tools before beginning.
Step 1: Attach Brackets to Wall Grid
Using the provided Allen key (110084) and screws (157562), attach the two mounting brackets to the KUNGSFORS wall grid. Insert two screws through the holes in each bracket and into the corresponding holes on the wall grid. Tighten securely.
Visual Description: Shows the wall grid with two brackets being attached using screws and an Allen key.
Step 2: Mark and Drill Holes for Mounting
Hold the assembled wall grid against the wall at the desired height. Use a pencil to mark the positions of the mounting holes on the wall. A spirit level can be used to ensure the grid is level. Drill holes at the marked locations according to your wall material and the chosen screws/fittings.
Visual Description: Depicts a person holding the wall grid against a wall, marking points with a pencil, and using a spirit level. It also shows screws being inserted into the wall.
Step 3: Mount the Wall Grid
Align the wall grid with the drilled holes. Insert appropriate screws (not included) through the mounting brackets and into the wall. Ensure the grid is securely fastened to the wall.
Visual Description: Shows the wall grid being mounted onto the wall with screws.
Parts Included
- 1x KUNGSFORS Wall Grid Assembly
- Tools shown in diagrams: Pencil, Spirit Level, Screwdriver (with a cross symbol indicating 'do not use'), Allen Key (110084), Screws (157562)
Important Considerations
- Always use screws and fittings appropriate for your wall or ceiling material.
- Ensure the chosen fixings have sufficient load-bearing capacity.
- If you are unsure about the correct fixings, consult a specialized retailer.