KUNGSFORS Shelf
Assembly Instructions
Important Safety Information
WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided. Screw(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
Parts Included
- Shelf (1x)
- Brackets (2x)
- Screws (4x, part number 115294)
Note: Wall mounting screws and plugs are not included and must be purchased separately, chosen based on your wall type and load requirements.
Assembly Steps
Step 1: Attach Brackets to Shelf
Place the shelf with its underside facing upwards. Position one bracket at each end of the shelf. Secure each bracket to the shelf using two screws (part number 115294). Ensure all four screws are tightened.
Step 2: Mount Shelf to Wall
Hold the assembled shelf against the wall at the desired location. Use a spirit level to ensure the shelf is perfectly horizontal. Mark the wall through the mounting holes on the brackets.
Crucially: Select wall screws and plugs appropriate for your wall material and the intended load. If you are unsure, consult a professional. Drill holes at the marked locations and insert wall plugs if needed. Align the brackets with the holes and secure the shelf assembly to the wall using suitable screws.
