TurboTronic VSmach180 Instruction Manual

Safety Advices & Cautions

Read all the instructions carefully before using the vacuum cleaner.

• This vacuum cleaner can only be used for dry purposes. Water, liquid, and other wet objects are prohibited from being sucked into the product. Do not spill water or liquid onto the vacuum cleaner, as this will increase the risk of electric shock.
• Do not use the vacuum cleaner to suck powders such as flour, cement, or other large objects, as the motor can be broken or the vacuum cleaner blocked.
• Please use a dry cloth to clean the vacuum cleaner. Do not use gas or liquid that can cause the surface to crack or fade.
• Please do not use or store the vacuum cleaner under high or low temperatures. The suggested using temperature is 0° -40° C indoors. Please store the product under cool and dry environment. Please avoid long-time sunshine on the product.
• Please fully recharge the battery when first used or after long-time storage. If the product is not used for a long time, please ensure the battery is recharged and used at least every three months.
• When the vacuum cleaner is fully recharged, please unplug the adaptor. Please do not pull the power cord directly.
• When working time becomes shorter due to low battery capacity, please buy a new battery unit to replace it.
• Do not litter the battery unit; it should be safely recycled.
• The battery unit can only be used for this vacuum cleaner. Please do not use it for other purposes and only charge it with the adaptor provided with the vacuum cleaner in the package. Do not disassemble the battery unit in case of damage or short circuit. Do not place the battery unit close to high-temperature objects or fire. Do not insert the battery unit with sharp objects or break the battery in case of electric shock.
• If the vacuum cleaner cannot work or some parts are broken, to avoid dangers, please do not disassemble it privately. Send it to the appointed maintenance or service center and get it repaired by a professional after-sales service.
• Please ensure that children cannot touch or use the vacuum cleaner and charge the battery unit in case of danger.

Parts List

The following parts are included with the vacuum cleaner:

1. ON/OFF button
2. SPEED CONTROL BUTTON
3. BATTERY INDICATOR
4. MAIN BODY RELEASE BUTTON
5. ELECTRIC TUBE
6. BRUSH RELEASE BUTTON
7. POWER BRUSH
8. DUST TANK RELEASE BUTTON
9. DUST TANK
10. DUST RELEASE BUTTON
11. MOTOR UNIT
12. BATTERY UNIT RELEASE BUTTON
13. 2 IN 1 TOOL (CREVICE NOZZLE AND DUSTING NOZZLE)
14. ADAPTOR
15. WALL MOUNTING

Packing List

Assembling

Assembly dust cup unit

1. Put filters into dust cup, twist the cone and match cone's pins into the grooves inside the dust cup.
2. Insert filter onto the cone.

Assembly dust tank with motor unit:

1. Put the dust cup to pins on the motor unit lower edge.
2. Push the dust cup until a "Click" sound is heard.

Assemble main unit with battery unit:

1. Press the battery unit onto the main unit until a “click” sound is heard.

Power brush, tube, and main body assembled:

1. Insert the upper end of the power brush into the lower end of the tube until a click sound is heard.
2. Insert the upper end of the tube into the lower end of the battery unit until a click sound is heard.

How to Assemble the Accessories

Accessory assembled into the main unit

Insert the 2 in 1 tool into the main unit hole and make sure it is inserted firmly.

Assemble the accessories to the tube

Insert the round end of either the 2 in 1 tool or the furniture tool into the lower end of the tube until a click sound is heard. Please refer to picture 8.

How to place the main unit

Wall mounting:

1. Fix the wall mounting near the socket.
2. Place the main unit on the wall mounting.

Using

ON/OFF

Press the ON/OFF button and SPEED CONTROL button to start the vacuum cleaner. Press the button again to adjust the vacuum cleaner work to HIGH/LOW speed.

ACCESSORY: 2 IN 1 TOOL

1. Insert the 2 in 1 tool into the main unit, then push the dusting head back. This form can clean sofa gaps, wall corners, stairs, keyboards, and other narrow places.
2. Insert the 2 in 1 tool into the main unit, and then push the dusting head back until it is locked. This form can clean furniture, home appliances, and bookshelves.
3. Insert the 2 in 1 tool into the tube and then push the dusting head back until it is locked. Insert the other end of the tube into the main unit. This form can clear roofs or other high places.

Main motorized brush

Connect the brush with the tube, then you can use the motorized brush to clean.

Charging

• Before charging, make sure the adaptor is the correct one.
• Place the vacuum on the wall mounting. When charging, one LED light will be turned on. When fully charged, three LED lights will turn on.
• When the battery is low, please charge it immediately with the adaptor.

Clean and Store

Empty dust

1. Press the motor unit release button to separate the motor unit from the battery unit.
2. Press the release button to empty the dust from the cup.

Dust cup clean

1. Press the release dust tank button and take it out.
2. Disassemble the dust cup. Get out the HEPA and plastic filter from the dust cup.
3. Both HEPA and filters can be washed. After cleaning, dry them naturally.

Picture 10 shows the dust cup components.

Clean the main brush

1. Glide the knob on the brush bottom to the left side, lift the brush roll cover.
2. Remove the brush roll and clean it (no water).

Attention: After long time use, the roll may accumulate hair or other masses which needs to be cleaned in time in order to keep the vacuum cleaner working efficiently.

Technical Data

Pro Cleaning Kit

Reaches high, cleans deep and gets in between cracks and crevices with ease.

Tools included:

• 1 × 2 in 1 Pivoting Dusting Brush
• Soft dusting brush
• Up top tool
• 1 × Deep cleaning brush
• 1 × Cabinet & Radiator Brush
• 1 × 2 in 1 Upholstery Brush
• 1 × Φ32 to Φ35 Adapter

Up top tool - Pivot to easily clean high and hard-to-reach places.

Soft dusting brush – Gently clean delicate surfaces without scratching.

Deep cleaning brush – Clean hairs and dust under furniture and appliances. Remove dust and dirt from crevices between furniture and walls. Working length can be extended.

Cabinets & Radiator brush – Long and slim design is perfect for sweeping inside cabinets, couches, radiators, shutters, etc. Working length can be extended.

2 in 1 Upholstery Brush – Quickly and easily removes debris and dust from sofas, mattresses, curtains, couches, chairs, etc. The bristle strip can be detached.

Pet brush: This is a pet brush. There are numerous small holes in the brush which can absorb hair. Hold the lower part; the hair can be absorbed after brushing the hair on the body of the pet.