TurboTronic VS10 Cyclonic Stick Vacuum

Product Overview

Congratulations on the purchase of the VS10 Cyclonic Stick Vacuum Cleaner by TurboTronic®. The VS10 represents state-of-the-art vacuum cleaner design, engineered for reliable and trouble-free performance. This manual provides comprehensive information on its use.

Vacuum Cleaner Components

The vacuum cleaner is comprised of the following parts:

• A. Handle
• B. Power button
• C. Cable Winder Release (Diagram label C; text description "E. Cable winding holder" is most appropriate)
• D. Dust compartment
• E. Tube (Diagram label E; text description "F. Tube")
• F. Tube (Diagram label F; text description "F. Tube")
• G. Front brush

Important Safeguards

HOUSEHOLD USE ONLY. READ ALL INSTRUCTIONS.

When using an electrical appliance, basic safety precautions should always be followed, including the following:

Read this user manual carefully before you use the appliance, and keep it safely for future reference.

Warnings

• Read this instruction booklet carefully.
• Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rating plate.
• The appliance should be connected to correctly-earthed 10 power sockets.
• Always remove the plug from the power socket when the appliance is not in use and before carrying out any cleaning or maintenance operations.
• Always remove the plug from the power socket before opening the appliance.
• Never use methylated spirits or other solvents to clean the appliance.
• Do not use the appliance to vacuum liquids.
• Never leave the appliance unattended when it is switched on. Keep the appliance out of the reach of children or the infirm.
• This appliance is for domestic use only. Use as described in this instruction booklet.
• Do not switch the appliance on if it appears to be faulty in any way.
• For repairs or accessories, contact your dealer or an authorized Service Center.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Symbol Key:

• ? Indicates to read and review instructions to understand operation and use of product.
• ⚠️ Indicates the presence of a hazard that can cause personal injury, death, or substantial property damage if the warning included with this symbol is ignored.
• Take care to avoid contact with hot surfaces. Always use hand protection to avoid burns.
• For indoor and household use only.

Safety Instructions

SAVE THESE INSTRUCTIONS

• Do not remove the plug by pulling the cable or the appliance itself.
• Do not use the appliance on wet surfaces.
• Do not run the appliance over the power cable.
• Do not use the appliance to vacuum lighted matches, cigarette ends, or hot ash.
• Do not obstruct the air intake or outlet vent.
• Do not use the appliance to vacuum needles, pins, or string.

Assembling the Vacuum Cleaner

Assembly before operation:

1. Fitting the tube 1: Insert the tube 1 into the body.
2. Fitting the tube 2: Insert the tube 2 into the tube 1.
3. Fitting the floor brush: Insert the brush into the tube 2.

Instruction for Use

1. Loosen the cable by rotating the cable winding holder 180 degrees. Insert the plug into an electrical outlet matching the voltage shown on the nameplate. Press the switch button to begin operation.
2. Adjust the angle between the brush and the body by rotating the handle.
3. To stop operation, press the switch button, disconnect the plug from the outlet, and rotate the cable winding holder 180 degrees to secure the cable.

Dual-position carpet/floor brush

• Position 1: Bristles extended for hard floors.
• Position 2: Bristles retracted for carpets.

Using the Cleaning Accessories

Clean the dust

1. Lift the cover and take out the dust cup.
2. Remove the foam filter from the dust cup.
3. Clean the dust inside the dust cup.

Clean the foam filter

1. Take out the foam filter when it becomes dirty.
2. Clean it with water and dry it naturally before the next use.

Maintenance

1. Pull the plug out of the socket before cleaning.
2. Clean the appliance with a dry cloth.
3. Take out the intake or outlet filter when it's getting dirty. Clean it in warm water without any detergent and put it back when it is completely dry.
4. If you do not intend to use this appliance for a period of time, store it in a dry and well-ventilated place. Keep it out of reach of children.

Disposal of Old Electrical Appliances

The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed-out "wheeled bin" symbol ?️ on the product reminds you of your obligation that when you dispose of the appliance, it must be separately collected.

Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

Limited Warranty

Limited Warranty applies to purchases made from authorized retailers of TurboTronic®. TurboTronic® Warranty coverage applies to the original owner and to the original product only and is not transferable.

TurboTronic® warrants that the unit shall be free from defects in material and workmanship.

Limited Warranty applies only when it is used under normal household conditions and maintained according to the requirements outlined in the Owner's Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in TurboTronic® sole discretion, will be repaired or replaced.
2. TurboTronic® reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the motor base clear of food spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by TurboTronic®. These defects include damages caused in the process of shipping, altering, or repairing the TurboTronic® product (or any of its parts) when the repair is performed by a repair person not authorized by TurboTronic®.
6. Products purchased, used, or operated outside Europe.

Illustrations may differ from the actual product. We are constantly striving to improve our products; therefore, the specifications contained herein are subject to change without notice.

TurboTronic® and Z-Line® are registered trademarks of Z-GLOBAL B.V.B.A®.

PRINTED IN PRC