AURA™ PRO GRILLE
INSTALLATION GUIDE
COMPONENTS
- LIGHT STRIPS
- MOUNTING KIT
- Y-SPLITTERS
- AURA BLUETOOTH CONTROL BOX
- ZIPTIES
- EXTENSION WIRES
- HARDWARE POWER HARNESS
INSTALLATION
STEP 1
Inspect kit to ensure all contents were included.
STEP 2
Decide where to locate the control box and light strips. Ensure wiring has enough length for light strips to be installed in desired location.
Diagram Description: An illustration shows a car's front grille. A wiring diagram illustrates connecting the control box to the car battery (via a fuse), an auxiliary wire, and multiple light strips using extension wires.
WARNING: 1. Connecting to more than 10 AMP will override the kit and cause early failure; ensure it is 10AMPs or less!! 2. Please ensure that the LED bars or strips/control box/wiring are all mounted in areas where will not exceed 85°C or 185°F.
STEP 3
Scan the QR code on the back of the control box to download the app.
[QR Code]
Image Description: A close-up of the OPT7 control box showing a QR code labeled "SCAN FOR APP OPT7 CONNECT".
STEP 4
Secure Control box in desired location with Velcro or zipties. The control box is NOT waterproof. Tuck it away from the elements.
Image Description: An illustration shows the OPT7 control box being secured with zipties.
STEP 5
Secure the light strips using the zip ties to tie all the wiring away from the moving components.
IMPORTANT: The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE (not included) or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.
Image Description: An illustration shows heat shrink tube being applied over an LED connector.
STEP 6
Open the "OPT7 Connect” App, pair your smart phone to the control box, and pick your desired color!
Image Description: An illustration shows the OPT7 Connect app interface on a smartphone, displaying color options and controls.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
[QR Code]
OPT7 CONNECT APP
- Colors
- Modes
- Door Assist
- Support
- Ability to control up to 4 devices at once
QR CODE TO DOWNLOAD
[QR Code]
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.
