Main Components
Identify the key parts included in your kit:
- Rigid Light Bars (various sizes)
- Control Box
- Hardware Power Harness
- Mounting Kit (includes wire mounts, screws, booster, velcro, zip ties)
- Hand Held Remote
- Adhesive Booster
Installation Steps
Step 1: Inspect and Test
Verify all components are present and test the unit with the provided 12V adapter.
Step 2: Plan Placement
Decide on the control box location, ensuring sufficient wiring length for light bars. Avoid engine bays and heated surfaces.
Step 3: Secure Control Box
Mount the control box using Velcro or zip ties in the chosen location.
Step 4: Manage Wiring
Use zip ties to secure light bars and route wiring away from moving vehicle parts.
Step 5: Operate with Remote
Use the included 21-Key E-Z Remote to select colors, patterns, speed, and brightness.
Step 6: Download the App
Enhance your experience by downloading the free OPT7 GLOW app for iOS and Android.
Connecting Power Harness
Connect the red wire (+) of the power harness to the vehicle's positive battery terminal. Connect the black wire (-) to the negative terminal or an unpainted frame area.
Warning: Ensure the connection does not exceed 10 AMP. Mount components in areas not exceeding 85°C (185°F).
Remote Pairing
To Pair: Reconnect power, aim the remote at the control box, and hold the ON button until LEDs flash white.
To Unpair: Reconnect power, aim the remote at the control box, and hold the OFF button until LEDs flash white.
Disclaimer
OPT7 Lighting is not responsible for damages from improper installation. Seek professional assistance if inexperienced. Modified installations may void the product warranty.
For the user guide, visit: OPT7 GLOW User Guide