HP Projector CC200 Quick Start Guide
Package Contents
- HP CC200 * 1
- Accessories:
- Power Adapter * 1
- Power Cord * 1
- Remote Control * 1
- AAA Batteries * 2 (For Remote Control)
- Quick Start Guide * 1
- Warranty Card * 1
- Product Notice * 1
Remote Control
The remote control has the following buttons:
- Power Source
- Image Home
- Volume Up (+)
- Volume Down (-)
- Mute
- Setup OK
- Back
- Focus Up (+)
- Focus Down (-)
- Navigation buttons (Up, Down, Left, Right, OK)
Product Interface
The product has the following interfaces:
- Power Key
- USB
- DC-in
- 3.5mm earphone
- HDMI
Usage Tips
-
Power On / Off
Power On: Press and hold the power button for 1 second, either on the top side of the projector or on the remote control.
Power Off: Press and hold the power button for 1 second, either on the top side of the projector or on the remote control. The CC200 will display the power off prompt, followed by shut down.
-
Focus Adjustment
To ensure a clear and sharp display, please adjust the focus of the projector before use. By pressing the Focus [+] and Focus [ - ] buttons on the remote control, it will allow for precise adjustment of the display focus according to your preferences.
The optimal viewing distance of the CC200 is between 1 and 3 meters (~3-9 ft) from the projector to the display surface.
-
Plug and Play
You can connect the CC200 through the HDMI input interface to project your content from an external video source (mobile, tablet, laptop, PC etc.). You can also directly display images or video located in the internal memory or any external storage via USB.
Enjoy your CC200!
