HP Projector BP5000/BP5000PLUS Quick Start Guide

Introduction

Congratulations on choosing the HP BP5000 / BP5000 Plus, part of the definitive premium cinema projection series. Experience unparalleled audio-visual immersive experiences of up to 150 inches.

Package Contents

• HP BP5000 or HP BP5000 PLUS *1
• Accessories:
• Power Cord *1
• Remote Control *1
• AA battery *2
• Quick Start Guide *1
• HP Warranty Card *1
• Product Notice *1

Device Overview

The projector features the following ports and indicators:

• Front/Top: Adjustable Stand (10)
• Rear Ports: USB 2.0 (4), AUX 3.5mm Stereo (Audio-out External Speakers/Headphone) (3), HDMI 2 (5), HDMI 1 (ARC) (2), S/PDIF (6), LAN (7), AC IN (1), USB 2.0 (8)
• Airflow: Air inlet (9), Air outlet (11)

Notice:

• Do not place any articles around the air inlet hole to prevent cold air from entering, ensuring proper heat exchange.
• Do not place any articles near the air outlet, which will cause internal heat accumulation due to hindered heat discharge.

Specifications

• USB: 5V, 0.5A
• HDMI Resolution: 4K
• Hardware Specifications: 3G+32G
• Appearance Size: 595*340*140 MM
• Resolution: 4K UHD (3840*2160)
• Environmental Characteristics: Ambient temperature 0-40°C, elevation below 5000m
• AC-IN: 110-240V~, 4A, 50/60Hz
• LAN: 10/100Mbps
• Product Size: 595*340*140mm
• Product Net Weight: 16kg

Supported Input Sources

• Embedded digital content platform (via wireless stick and/or RJ45 Ethernet port)
• Digital and Analog TV
• HDMI * 2 (including HDMI ARC)
• USB 2.0 * 2

Audio Outputs

The HP BP5000 features an embedded powerful 30-watt stereo speaker set. Additional audio outputs include:

• S/PDIF * 1
• HDMI ARC *1
• 3.5mm earphone out
• Bluetooth (4.0)

How to Use

1. Place the projector on a stable horizontal surface (e.g., table, TV stand) facing the desired vertical projection surface (e.g., wall, projection screen). Plug the projector with the power cable into a working AC power socket, and connect your external video and audio sources into the applicable input ports.
2. Before using the remote controller for the first time, insert the included AA batteries* 2 into the remote. Power on the projector and follow the on-screen instructions to pair the remote.
3. To set up the projection area yourself, select (Settings > Projection > Installation Assistant) and follow the on-screen instructions. For professional assistance, contact your local installation provider.
4. If the projected picture is out of focus and/or distorted, select (Settings > Projection > Auto-Focus / Keystone) to correct it.
5. For safe viewing and to prevent eyesight damage, enable Smart Eye Protection (Settings > Projection > Smart Eye Protection). During operation, DO NOT look directly at the projector lens.
6. The BP5000 can also be used as a speaker (audio-only) without using the screen. Select (Settings > Switch off Display).
7. You can project a screen size of 100 inches (255 cm) from just 8.7 inches (22 cm) away from the wall.

Thank you again for choosing HP. We hope you enjoy using the HP BP5000 to elevate your audio-visual experiences.