Fujitsu FJ-RC-WIFI-1BT Halcyon 3-Wire Remote Controller WiFi Adapter
Model Number: FJ-RC-WIFI-1BT
General Information
The FJ-RC-WIFI-1BT is an Intesis AC Cloud Control interface designed for 3-wire remote controller-compatible Fujitsu Halcyon indoor units.
General Features
- A plug-in interface that connects your Halcyon indoor unit to the Intesis AC Cloud Control app.
- Connects wirelessly to your router using the 2.4GHz WiFi band.
- Features Bluetooth connection for registration.
- Provides operational control, monitoring, and scheduling for commonly used functions, including: equipment start/stop, operation mode, fan control, room temperature display (when used with a wired remote controller), error code reporting, and filter status/reset.
- Supports Over-the-Air (OTA) software updates.
- Allows simultaneous control of the indoor unit by a Fujitsu remote controller and the Intesis AC Cloud Control app.
- Compatible with Google Home and Amazon Alexa for voice control.
- Offers a small form factor, suitable for wall or ceiling mounting.
- Comes with a 2-year manufacturer's warranty.
Specifications
Electrical
| Parameter | Value |
|---|---|
| Power Supply, Consumption | 12Vdc, 55mA |
| Source | Indoor unit through RC interface |
| RF frequency range | 2412 to 2484 MHz |
| Output power (average) | 20 dBm (11Mb/Sec.) / 14 dBm (72.2Mb/Sec.) |
Equipment Connections
| Connection | Details |
|---|---|
| Device to IDU | 3-cond cable, #18-22AWG stranded |
Operating Environment
| Parameter | Value |
|---|---|
| Operating Temperature Range | 32-104°F (0-40°C) |
| Operating humidity | <93% RH, no condensation |
| Storage humidity | <93% RH, no condensation |
| RoHS conformity | Compliant with RoHS directive (2011/65/EU) |
Weight and Dimensions
| Measurement | Value |
|---|---|
| Net weight | 2.8 oz (80g) |
| Dimensions (H x W x D) | 4.25 x 2.75 x 1.13 inches (108 x 70 x 28 mm) |
Compatibility
Compatible Indoor Units
The adapter is compatible with a range of Fujitsu Halcyon indoor units, including models such as:
- ABU18RULX, ABU24RULX, ABU36RSLX
- AGU12RLF, AGU15RLF, AGU9RLF
- ARU12RLF, ARU18RLF, ARU24RLF, ARU7RLF, ARU9RLF
- ASU12RLF1, ASU15RLF1, ASU18RLB, ASU18RLF, ASU24RLB, ASU24RLF, ASU30RLXB
- AUU12RLF, AUU18RLF, AUU7RLF, AUU9RLF
Note: Models marked with (1) require the UTY-XCBXZ2 interface kit and UTY-WIFI wiring kit. Models marked with (2) require the UTY-WIFI wiring kit.
Compatible Wired Remote Controllers
- UTY-RNKU
- UTY-RSKU
- UTY-RHKU
Diagram Descriptions
Dimensions
The FJ-RC-WIFI-1BT adapter is a compact rectangular device. Its dimensions are approximately 4.25 inches (108 mm) in height, 2.75 inches (70 mm) in width, and 1.13 inches (28 mm) in depth. A small circular mounting hole, approximately 0.16 inches (4 mm) in diameter, is present on the front face.
Connection Diagram
The connection diagram illustrates the setup for integrating the FJ-RC-WIFI-1BT. It shows the AC Cloud Control device (FJ-RC-WIFI-1BT) connecting via a 3-wire cable to the indoor unit (represented by a BWR connector). The device also connects wirelessly to a Wi-Fi Access Point or Router, which is linked to the Internet. A separate Remote Controller (RC) is also shown in the system.
Ordering Information
Ordering Code: FJ-RC-WIFI-1BT
Effective Date: 6/6/2022
Version: FJ-RC-WIFI-1BT :2022A
