BLUETTI AC200MAX Portable Power Station

1. BRIEF INTRODUCTION

The BLUETTI AC200MAX offers high continuous output power of 2,200W from its pure sine wave inverter. It features a 100W PD3.0 USB-C port, an upgraded MPPT controller supporting up to 900W solar input, and a built-in 30A NEMA TT-30 outlet, ideal for RV users. The AC200MAX now includes Bluetooth connectivity, allowing remote control via the BLUETTI Smartphone App (iOS & Android). It also supports up to two expandable battery packs, the BLUETTI B230 or B300, enabling a maximum capacity of 8192Wh for extended power needs.

2. ABBREVIATION

• BMS: Battery Management System
• MPPT: Maximum Power Point Tracking
• SOC: State of Charge
• AC: Alternating Current
• DC: Direct Current
• PV: Solar Panel(s) Charging (Photovoltaic)
• Grid: Home Power Supplied by Utility
• DOD: Depth of Discharge
• ECO Mode: A power-saving setting that automatically turns off AC power after 4 hours of low load (≤50W) or no load to conserve energy.

3. SAFETY INSTRUCTION

• Keep the AC200MAX away from fire and heat.
• Operate the AC200MAX in a dry and well-ventilated place. Dry thoroughly if it becomes moisturized or damp before use.
• Do not obstruct fan openings to ensure proper ventilation; otherwise, permanent damage may occur.
• Do not move the unit while operating, as vibrations and sudden impacts can lead to poor connections internally.
• Use only the original charger and cables designed for the AC200MAX. The company is not liable for damage caused by third-party equipment, which may also invalidate your warranty.
• Carefully read the operating instructions of connected electrical products. Improper operation can lead to accidents or injuries.
• Use the AC200MAX power station carefully and keep children away from it.
• WARNING: In case of fire, only a dry powder fire extinguisher works.
• WARNING: Do not insert foreign objects into any ports (AC, DC, or ventilation holes). The power station generates potentially lethal AC power similar to a household wall outlet.
• WARNING: Service or repair operations involving internal battery replacement or other component replacement should only be performed by authorized personnel.

4. BLUETTI APP

Download the 'BLUETTI' app from the App Store (iOS) or Google Play (Android) to remotely control your AC200MAX. The AC200MAX supports Bluetooth control. After downloading and installing the app, launch it and tap 'Bluetooth CONNECT' to register your AC200MAX. The app allows you to view basic information, customize working modes, and parameters under 'Settings' by pressing the 'gear icon' ⚙️. Keep your phone within 5m/16.4ft of the AC200MAX during updates.

5. IN THE BOX

Standard Accessories

Optional Accessories

6. FEATURES

The AC200MAX features the following ports and controls:

• 01 Power Button: Long/Short press to turn ON/OFF the AC200MAX.
• 02 DC 12V/10A cigarette lighter port: For devices with corresponding plugs, like vehicle vacuums or refrigerators.
• 03 DC 12V/30A output: A 30A output port suitable for most appliances, especially for RVs.
• 04 DC 5521 12V/10A output x 2pcs: Traditional ports for routers, cameras, or old laptops.
• 05 USB-C 100W output: Charges devices up to 100W Max, suitable for phones and laptops.
• 06 Battery extension port x 2pcs: Connects the AC200MAX with B230 or B300 battery packs.
• 07 DC input port: Connects to solar panels, car chargers, lead-acid batteries, or extra AC adapters.
• 08 AC input port: For charging via the AC adapter or D050S.
• 09 Wireless charging pad 15W x 2pcs: Place compatible phones horizontally on top of the AC200MAX and turn on DC power via the screen.
• 10 Interaction LCD Touchscreen: Controls the unit with finger touch.
• 11 US AC output x 5 pcs (EU/UK AC output x 4pcs): Standard AC receptacles providing power similar to a household wall outlet. High-voltage areas may use special sockets.
• 12 US AC TT-30: A NEMA TT-30 connector, the 120V/30A recreational vehicle standard, commonly found in RV parks in the US and Canada.
• 13 USB-A 5V/3A output x 2pcs: Standard USB-A ports.
• 14 USB-A 18W output x 2pcs: Quick charge USB-A ports.

7. LET'S GET STARTED

Startup: Short press the power button; the indicator light turns on. Shutdown: Press and hold the power button for several seconds until the indicator light turns off.

The DC and AC power switches are integrated into the LCD screen (Homepage). Press 'DC ON/OFF' or 'AC ON/OFF' on the screen to control DC/AC output.

LED Indicator Status:

8. TOUCHSCREEN

The Interaction LCD screen (Information Vision) allows you to:

• View real-time voltage, current, power, temperature, and state of charge/discharge.
• Adjust output voltage, frequency, charging mode, power consumption mode, and time settings.
• Operate the screen using touch input.
• View fault history, BMS, DSP, ARM, and HMI hardware versions.

9. TOUCHSCREEN OPERATION

Note: The LCD touch screen is resistive; tap lightly until it beeps. Avoid direct sunlight to maximize screen lifespan.

When the power button is pressed, the main page (Homepage) is displayed. The Homepage shows:

• a. PV/Others charging Info
• b. BMS Info
• c. Date/Time
• d. DC Load Info
• e. DC ON/OFF Switch
• f. AC ON/OFF Switch
• g. Adapter Charging Info
• h. AC Load Info

From the Homepage, you can access 'Settings' (Figure 1) to configure Language, AC Output Voltage, AC Output Frequency, DC Input Source, ECO Mode, Touch Sound, Backlight Brightness, and Sleep Time. You can also set the Date and Time.

Tapping 'Data' on the Homepage leads to the Data page (Figure 3), where you can view 'Product Info', 'Inverter & Charger Info', 'BMS Maintenance', and 'Fault History'. The 'Alarm' function on the Homepage displays current error messages, with a fault indicator turning orange if an issue occurs.

Bluetooth Pairing Guide

This guide applies to BLUETTI products with Bluetooth functionality.

Function: BLUETTI products feature Bluetooth 5.0 for interaction with other devices within 10m. The BLUETTI app allows remote monitoring and control. Bluetooth can be enabled/disabled via the 'Setting' > 'Bluetooth' menu on LCD screens or by pressing the Bluetooth button on devices without an LCD screen.

Transferable Data:

• Display Data: AC On/Off Status, Charge/Discharge Power, Model Code, Alarm History, Firmware Version, SOC (State of Charge).
• Control Data: AC and DC ON/OFF, System Parameters (e.g., AC output frequency), Charge/Discharge Time, Empty/Full Capacity Settings, OTA Firmware Upgrade.

Bluetooth Pairing: Download the BLUETTI app, power on the product (wait 10s for initialization), and pair via Bluetooth name (Model + SN).

Notes for Connection: If Bluetooth is not found, check its status. For poor connection, move closer, remove obstacles, or avoid sources of electromagnetic radiation (microwaves, ticket gates). Restarting the product and reconnecting may help. Keep the product surface clean for optimal performance.

10. CHARGING

The AC200MAX can be charged via multiple methods:

• From the AC wall outlet: Turn the AC200MAX ON, connect the adapter to the wall outlet and the AC input port. Charging stops automatically when fully charged.
• From the solar panels: Connect solar panels (10V-145V Open Circuit Voltage) using the solar charging cable (Standard Accessory 3). The AC200MAX activates upon successful setup. Max input current is 15.2A ± 0.3A.
• From the car cigarette lighter port: Connect via the car charging cable. Set DC input source to 'Others' in settings. Input current requirement is 8.2A.
• From the generator (gasoline, propane, or diesel): Connect the AC adapter to the generator and the AC charging port of AC200MAX. Press the power button to start charging; it stops automatically when full.
• From the lead-acid battery: Connect using the charging cable (Accessory 9). Ensure correct polarity (red end is positive). Set DC input source to 'Others' for lead-acid battery charging (max current 8.2A). Note: Accessory 9 is for AC200MAX charging only.
• Dual Charging: Set 'DC Input Source' to 'PV' for AC + PV Dual Charging. Set 'DC Input Source' to 'Others' for AC + Adapter/Lead-Acid Battery Charging.

Diagram description: A diagram illustrates the AC200MAX Dual Charging System, showing connections from an Adapter, Solar Panels, Car, and Lead-acid Battery to the unit.

11. DISCHARGING

To use output ports (12V/30A, 12V/10A, cigarette lighter, USB-A, USB-C): Press the power button, go to Homepage, and tap 'DC ON/OFF' to confirm. Tap 'DC ON/OFF' again to turn off DC output.

To use AC output: Press the power button, go to Homepage, and tap 'AC ON/OFF' to confirm. Tap 'AC ON/OFF' again to turn off AC output.

12. APPLICATION SCENARIO

• Outdoor: Car equipment (fridge, vacuum cleaner), camping equipment (garden electric tools like blowers, lawnmowers, drills, saws), BBQ grills, LED lights.
• Indoor: Refrigerators, kitchen appliances (kettle, toaster, blender, coffee maker, rice cooker), laptops, phones, lighting.

13. EXAMPLES OF LOADS

Most appliances are compatible with the AC200MAX's 12V/30A, 12V/10A, cigarette lighter, USB-A, and USB-C ports. Some products may trigger over-current protection upon starting due to high instantaneous current.

The AC200MAX can power products with a rated power of 2200W or less. Overload protection may still activate for appliances with high instantaneous start-up power. It is recommended to use it with products having lower-rated power.

If an output over-current, overload, or short circuit occurs, the corresponding output port will turn off and attempt to restart automatically every 20 seconds. If the issue persists, the port will lock, requiring manual troubleshooting. If output repeatedly stops, turn off the equipment and contact the seller or maintenance group.

When the battery level reaches 0%, DC and AC output will turn off. Output resumes when the battery is recharged to over 5%. Check the battery level before use to protect and enhance battery life.

The AC200MAX supports simultaneous charging and discharging. Keep the equipment laid flat during these operations.

14. AC200MAX + B230 CONNECTION Capacity Expansion

The AC200MAX capacity can be expanded by 1-2 B230 battery packs (4096 - 6144Wh) or 1-2 B300 battery packs (5120 - 8192Wh). Refer to the BLUETTI support YouTube channel for detailed installation instructions.

Diagram description: Diagrams show the connection of one or two extended battery packs (B230/B300) to the AC200MAX using a specific cable. Steps involve connecting the cable and locking it.

15. ESTIMATION OF OPERATING TIME

Estimated operating times for various devices:

• Smartphone (10W): 175-200 times
• LED Light Bulb (20W): Around 75-85 hours
• Television (75W): Around 20-22 hours
• Electronic Tools (80W): Around 19-20 hours
• Refrigerator (90W): Around 17-19 hours
• Slow Cooker (200W): Around 8-9 hours

Formula: 2048Wh × DOD × η ÷ (load power) = charging time. (Note: DOD is battery discharge depth, η is local inverter efficiency. DOD=90%, η=90% assumed).

16. TECHNICAL SPECIFICATIONS

AC Output

AC & DC will be turned off when SOC reaches 0%.

DC Output

Note: a: 30A Max. current for all DC output ports. b: The cigarette lighter port will shut off once overloaded. c: 12V/30A port will shut off when overloaded again.

Solar Input

Note: PV Input, Car Charging, and additional Adapter shares the same Aviation Port.

AC Charging Adapter

Note: a: AC200MAX can auto-activate via solar power (turn ON without pressing the power button from POWER OFF). Unplug the DC input cable to disable auto-activation. b: AC200MAX cannot be activated via the adapter. c: Simultaneous charging & discharging supported.

BLUETTI APP (Bluetooth)

17. TROUBLESHOOTING

Error Codes:

• 001: PV Over Voltage
• 004: DC Output Short Circuit
• 005: Adapter Over Voltage
• 006: Adapter Low Voltage
• 007: Adapter Relay Error
• 008: Adapter Over Current
• 010: USB/USB-C/PD Over Current
• 011: 12V/10A Over Current
• 012: 12V/30A Over Current
• 014: DC Start Failure
• 015: DC Output Relay Error
• 016: BUS Start Failure
• 017: Inverter Start Failure
• 018: BUS Low Voltage
• 019: BUS High Voltage
• 020: Inverter Low Voltage
• 021: Inverter High Voltage
• 022: Inverter Low Frequency
• 023: Inverter High Frequency
• 025: Battery High Voltage
• 026: Battery Low Voltage
• 027: Battery Unconnected
• 028: Fan Error
• 029: NTC Error
• 030: Calibration Error
• 031: Inverter Over Load
• 032: Inverter Short Circuit
• 033: DSP Communication Error
• 034: BMS Communication Error
• 035: EEPROM Read_write Error
• 036: Parameters of Control Module Error
• 041: BMS Temperature Error
• 042: BMS Over Voltage
• 043: BMS Low Voltage
• 044: BMS Over Current
• 045: BMS Pre-charge Failure
• 046: BMS Output Short Circuit
• 051: AC Output Locked
• 053: USB/USB-C/PD Locked
• 054: 12V/10A Locked
• 055: 12V/30A Locked

18. FAQ (Frequently Asked Questions)

• How to claim the warranty? Please write your after-sales requirements on the warranty card and send it to the vendor.
• Can the unit be upgraded? Yes, when connected to the BLUETTI App via Bluetooth, firmware (ARM, DSP, HMI, BMS) can be upgraded online through OTA.
• Can it charge and discharge at the same time? Yes, it supports pass-through charging. Keep the equipment laid flat during use, charging, and discharging.
• How to store the AC200MAX? Charge the unit to 60-80% SOC every 3-6 months to extend battery life.

19. DECLARATION

Specifications and appearance are subject to improvement without prior notice.

The company is not liable for damage caused by force majeure (fires, floods, earthquakes), user negligence, misuse, or abnormal conditions.

The company is not liable for accidents or damages resulting from failure to follow manual precautions.

This product is not suitable for critical safety equipment (automatic energy devices, emergency medical devices), or appliances requiring high power reliability and security (aerospace, trunk communication, nuclear control, medical equipment). Please confirm applicability in advance.

20. FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Unauthorized modifications may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits under Part 15 of FCC Rules, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used per instructions. No guarantee of no interference in a particular installation.

If interference occurs, users are encouraged to:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to a different circuit than the receiver.
• Consult a dealer or experienced radio/TV technician.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 0.65ft between the radiator and the body.

Manufacturer Information

Manufacturer: Shenzhen PowerOak Newener Co.,ltd

Address: F19, BLD No.1, Kaidaer, Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China

Company registration No.: 91440300071761480R

VAT No.:

Tel: 0086-755-23705980

E-Mail: feedback@poweroak.net

EU Kontakt:

Company name: Shenzhen PowerOak Newener Co.,ltd

Address: Lindwurmstr. 114, 80337 Munich, Germany

Company registration No.: HRB 261852

VAT No.: DE342113007

Tel: 0049 421 87852946

E-Mail: logi@bluetti.de

UK Kontakt:

Company name: POWEROAK ENERGY UK CO., LTD

Address: Unit 2 Northgate, Bolsover Busines Park, Bolsover, S44 6BD

Company registration No.: 396829822

VAT No.:

Tel: 0044-7860 8449 32

E-Mail: poweroak.eu@bluetti.com