BLUETTI AC240P Portable Power Station User Manual

1. Safety Instructions

Read this manual for instructions on the proper use and safety information for the product. The safety instructions provided herein are for illustrative purposes that include but are not limited to those listed in this manual. Actual operation shall comply with all applicable safety standards. If you have any questions, feel free to contact BLUETTI support or your local BLUETTI dealers.

1.1 Statement

To ensure a safe operation, it's crucial to observe and adhere to the following conditions: Always operate or store the product in the conditions specified in this manual. Avoid unauthorized disassembly, component replacement, or modification of software codes.

BLUETTI shall not be liable for damages resulting from the following circumstances:

• Force majeure events such as earthquakes, fires, storms, floods, or mudslides.
• Damage caused by the customer's own transportation.
• Damage resulting from inadequate storage conditions as specified in the manual.
• Damage caused by customer negligence, improper operation, or intentional actions.
• System or hardware damage caused by third parties or customers, including but not limited to improper handling and installation not in accordance with the instructions in this manual.
• Usage of the product with devices that require a high-performance Uninterruptible Power Supply (UPS), including but not limited to data servers, workstations, medical equipment, and other similar devices.

1.2 General Requirements

INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING

When using this product, basic precautions should always be followed, including the following:

• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product. And do not insert foreign objects into any ports of the product.
• Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons.
• To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product.
• Do not use a battery pack or appliance that is damaged or modified, as they may exhibit unpredictable behavior resulting in fire, explosion, or personal injury.
• Do not operate the product with a damaged cord or plug, or a damaged output cable.
• Do not attempt to replace the internal battery or any other component of the product by anyone other than authorized personnel. There are no end-user serviceable components. Do not disassemble the product; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
• To reduce the risk of electric shock, unplug the product from the outlet before attempting any instructed servicing.
• WARNING - RISK OF EXPLOSIVE GASES. To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and manufacturer of any equipment you intend to use in the vicinity of the battery. Review cautionary markings on these products and engines.
• PERSONAL PRECAUTIONS a. Wear complete eye protection and clothing protection. Avoid touching eyes while working near the battery. b. Never smoke or allow a spark or flame in the vicinity of the battery or engine. c. Be extra cautious to reduce the risk of dropping a metal tool onto the battery. It might spark or short-circuit the battery or other electrical parts which may cause an explosion.
• When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not expose the product to fire or excessive temperature. Exposure to fire or temperature above 80°C (176°F) may cause an explosion.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that safety is maintained.
• Do not stack anything on top of the product while in storage or while in use. Do not move the product while operating as vibrations and sudden impacts may lead to poor connections to the hardware inside.

CAUTION

• Do not use this product in the rain.
• In case of fire, use only a dry powder fire extinguisher appropriate for the product.
• WARNING - RISK OF ELECTRIC SHOCK. Never use the product to supply power tools to cut or access live parts or live wirings, or materials that may contain live parts or live wirings inside, such as building walls, etc.

1.3 Grounding Instructions

The product is designed for portable use and typically does not require earth grounding. However, if you connect it to the power grid, it's important to ensure proper grounding for safety. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with an AC power cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

1.4 Handling Requirements

During transportation or storage, take care to avoid dropping, violently impacting, or tilting the product as it may result in internal damage. If necessary, use mechanical assistance such as carts or adjustable height workbenches to ensure safe handling.

1.5 Storage Instructions

• When the SoC drops to 5%, please charge the product immediately.
• Before storing the product, charge it to 40% to 60% SoC to keep it in optimal condition. In addition, power off the unit and disconnect all electrical connections from it.
• Store the product in a cool and dry place, keeping it away from flammable or combustible materials and gases.
• The product can be safely stored within a temperature range of -20°C to 45°C (-4°F to 113°F). However, if the storage duration exceeds one month, it's recommended to maintain an ideal storage temperature of around 30°C (86°F).
• Fully cycle the product every 3 months to maintain the battery's health. It's NOT recommended to store the unit for extended periods of time, as it may affect its performance and overall lifespan.
• If the SoC drops to 0 (during storage or upon startup), take the following actions to safely restart the product: Shut down immediately. Charge within 48 hours. Keep it at an ambient temperature of 5°C to 35°C (41°F to 95°F) for 6 hours before charging. It's recommended to charge the product via an AC source. If charging via solar energy, ensure that your solar system provides an output of more than 100W.
• The symbol displayed is intended to remind you to read the instructions in the literature accompanying the product before operation and maintenance.
• Connect the product to a socket-outlet that has an earthing connection using the power cord provided.
• The socket-outlet should be installed near the product and easily accessible for safety purposes.
• Never dispose of a battery by throwing it into fire or a hot oven, or by mechanically crushing or cutting it, as these may cause it to explode.
• Avoid leaving batteries in extremely high-temperature environments, as this can result in an explosion or the leakage of flammable liquid or gas.
• The battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal.
• Please refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

SAVE THESE INSTRUCTIONS

BLUETTI shall not be liable for any equipment damage caused by the violation of the above instructions.

2. Packing List

Standard Accessories

Optional Accessories

• B210P Expansion Battery
• USB-C to USB-C Cable (output)
• Lead-acid Battery Charging Cable (Charge the AC240P via a lead-acid battery)
• Parallel Box
• AC Parallel Charging Cable
• RV Power Cable (For RV's 12V devices)
• PV Voltage Regulator (Convert high solar panel voltage to a suitable level for battery charging)
• 12V Power Cable (For 12V devices with DC5521 port, such as routers, cameras, etc.)

3. Product Introduction

Meet the BLUETTI AC240P Power Station, an exceptional energy solution for travel enthusiasts who demand the best. With a massive 2,400W output, it can power everything from small electronics to large RV appliances. Not only that, but the AC240P also boasts an impressive battery capacity that ranges from 1,843Wh to a staggering 10,443Wh with four B210P expansion batteries. And if you need even more power, you can simply connect another AC240P for uninterrupted power for days on end. Managing the AC240P is a breeze thanks to the BLUETTI App, which lets you control the unit's various functions and settings with ease. With features like ECO Mode and UPS Mode, you can optimize your power consumption and protect your device at all times. Whether you're camping or on a road trip, the AC240P provides a reliable and easy-to-use energy solution for your on-the-go lifestyle.

Danger: Do not connect the AC output of AC240P to the grid.

4. Product Overview

• 1. Battery Expansion Port
• 2. Cigarette Lighter Port
• 3. Power Button ?
• 4. DC Power Button ?
• 5. LED Screen
• 6. USB Power Button ?
• 7. AC Power Button ⚡
• 8. AC Output ⚡
• 9. USB-C Port
• 10. USB-A Port
• 11. RV Port
• 12. DC Input ☀️
• 13. AC Input ?
• 14. Grounding Pole
• 15. Bleed Valve
• 16. Parallel Port ?

5. Power ON / OFF

Attention: Please place the unit on the platform firmly and stably.

Power ON

Press the Power Button ?. The button lights up indicating that the AC240P is now on standby.

Power OFF

Press and hold the Power Button ? for 2 seconds to turn off the unit.

AC ON / OFF

When the AC240P is on, press the AC Power Button ⚡ to turn AC output on/off.

USB ON / OFF

When the AC240P is on, press the USB Power Button ? to turn USB output on/off.

DC ON / OFF

When the AC240P is on, press the DC Power Button ? to turn DC output (Cigarette Lighter Port, RV Port) on/off.

6. LED Screen

The AC240P features an informative LED screen that offers easy access to all the essential information about the unit's status and performance. When you power on the unit, the LED screen lights up, and when you power off the unit, the screen turns off as well.

• 1. Expansion Battery: Icon representing an attached expansion battery (up to 4).
• 2. Silent Charging: Unit is charging in Silent Charging Mode. ?
• 3. DC Input: Unit is charging from a DC power source, such as solar panels, lead-acid batteries, etc. ☀️
• 4. Bluetooth Connection: Unit connects to BLUETTI App via Bluetooth. ?
• 5. WiFi Connection: Unit connects to BLUETTI App via WiFi. ?
• 6. Fan Status: Fan is activated and working properly. Flashing indicates a fan problem. ⚙️
• 7. Turbo Charging: Unit is charging in Turbo Charging Mode. ⚡
• 8. AC Input Power: Real-time AC charging power. ?
• 9. AC Output Power: Real-time total AC output power. ⚡
• 10. AC Output Voltage: Real-time AC output voltage. ⚡
• 11. AC Output Frequency: Real-time AC output frequency. ⚡
• 12. Grid Connection: Unit is charging from the home grid. ?
• 13. DC Output: DC output is turned on. ?
• 14. AC Output: AC output is turned on. ⚡
• 15. Power Lifting Mode: Unit is operating in Power Lifting Mode. ?
• 16. Remaining Time: Remaining time for charging or discharging. ⏳
• 17. Charge / Discharge Status: ? Charging, ⚡ Discharging.
• 18. Parallel Connection: Unit is operating in parallel mode with another AC240P unit. ?
• 19. Low Temperature Alert: Internal temperature is lower than -20°C (-4°F). ❄️
• 20. High Temperature Alert: Internal temperature is higher than 70°C (158°F). ?
• 21. Overload Alert: Unit is overloaded. ⚠️
• 22. Overcurrent Alert: Unit is drawing too much current, which can cause damage to the unit or any connected devices. ⚡
• 23. Fault Alert: There's an issue with the AC240P, which may require troubleshooting or repair. ❌
• 24. DC Output Power: Real-time DC output power. ?
• 25. Low Battery Alert: The SoC drops below 5%. ?
• 26. Battery Capacity (SoC): The remaining battery capacity. ?
• 27. DC Input Power: Real-time DC input power. ☀️
• 28. ECO Mode: The ECO Mode is activated to save power. ?
• 29. Charge / Discharge Progress: The bar increases during charging and decreases during discharging. ?

7. Charging

AC240P supports four charging methods: AC, solar, car, generator, and Lead-acid battery. Attention: Double-check that all cables are firmly plugged in. Avoid getting the plug and socket wet to prevent any potential damage.

7.1 AC Charging

Plug the AC240P into a standard wall outlet and start charging. Once it's fully charged, the AC240P automatically stops charging to prevent overcharging. For a fast charge, you can enable Turbo Charging in the BLUETTI App, which allows for an 80% capacity in just 45 minutes at an ambient temperature of 25°C (77°F).

7.2 Solar Charging

Connect the solar panels (in series or parallel) to AC240P via the solar charging cable. When receiving a continuous input of 1200W, the AC240P can be charged up to 80% in about 1.3 hours. However, please be aware that the charging time may vary based on weather conditions, sunlight intensity, panel orientation, and other variables.

Note: Make sure your solar panels meet the following requirements: Voc: 11V-60V, Current: 21A Max., Power: 1200W Max. Non-waterproof solar panels will lose efficiency if they get exposed in the rain for a long time.

Attention: For solar panels with an open circuit voltage between 60V and 145V, you can still use them to charge the AC240P. Simply connect the solar panels to the AC240P via the PV Voltage Regulator, and you can enjoy seamless and hassle-free solar charging.

7.3 Car Charging

Connect AC240P to the vehicle's 12V cigarette lighter port via the car charging cable. The AC240P automatically stops charging once it's fully charged.

Note: Make sure your vehicle meets the following conditions for charging: The vehicle is capable of supplying power with a maximum current of 8A. The vehicle's engine is running during the charging process.

7.4 Generator Charging

Connect the AC240P to a generator via the AC charging cable. The AC240P also automatically stops charging when it's fully charged.

Note: Make sure your generator delivers the AC output with charging voltage, frequency, and Grid Self-adaption Mode voltage that meet AC240P's specifications. If the total power demand of your connected devices exceeds the generator's output capacity, please turn on the Grid Self-adaption Mode to ensure a seamless charging experience.

7.5 Lead-acid Battery Charging

In this method, the AC240P is charged by connecting the lead-acid battery and the AC240P DC/PV port via the optional lead-acid battery charging cable as shown in the figure below.

8. Discharging

Besides the cigarette lighter port, USB-A, and USB-C, AC240P also features two types of AC outlets and an RV port, expanding your charging options.

8.1 AC Discharging

8.2 DC Discharging

Note: To ensure optimal performance, avoid short-circuiting the ports and keep them dry during use or storage. Additionally, do not block or cover the ports while ensuring proper ventilation.

9. Settings

The AC240P offers the convenience of adjusting its settings either via the LED screen or the BLUETTI App. With the unit's LED screen, you have direct control over various settings such as Power Lifting Mode, ECO Mode, output frequency, and charging modes. Additionally, by using the BLUETTI App, you can access a user-friendly interface on your phone to conveniently monitor and control the AC240P.

9.1 Setting Mode

When the screen is on, press and hold the AC and DC Power Buttons ⚡? for about 2 seconds until the output frequency flashes to enter the Setting Mode.

9.2 ECO Mode

The AC240P has two ECO modes that help you save power and extend battery life:

• AC-ECO Mode: In this mode, if the AC power output falls below a certain level for a set period of time, the AC power will automatically turn off. Note: This mode is not available when the AC240P is charging from an AC source like a wall outlet or generator.
• DC-ECO Mode: In this mode, if the DC power output falls below a certain level for a set period of time, the DC power will automatically turn off.

Attention: The AC-ECO and DC-ECO modes are enabled by default to save energy, and it's recommended to keep them enabled at all times. Use the BLUETTI App to enable or disable AC-ECO Mode and DC-ECO Mode separately. If you use the LED screen, they'll be turned on or off at the same time. To avoid any interruption in charging, disable ECO Mode when charging a small device that consumes less than 60W of power.

In the Setting Mode, press the DC Power Button ? to navigate through the setting items. When the icon flashes on the screen, press the AC Power Button ⚡ to enable or disable the ECO Mode ?.

9.3 Frequency Switching

The current output frequency (50Hz / 60Hz) is displayed in the lower right corner of the screen. In the Setting Mode, press the DC Power Button ? to navigate until the output frequency appears on the screen. Then, press the AC Power Button ⚡ to switch the frequency options based on your requirements.

Note: Turn off AC Power Button ⚡ before setting Frequency.

9.4 WiFi & Bluetooth Connection

To connect the AC240P to the BLUETTI App, turn on the WiFi ? or Bluetooth ? first. In the Setting Mode, press the DC Power button ? to navigate through the setting items. When the icon flashes on the screen, press the AC Power Button ⚡ to turn Bluetooth on. Similarly, when the icon flashes on the screen, press the AC Power Button ⚡ to toggle WiFi on.

9.5 Power Lifting Mode

The Power Lifting Mode is specifically designed to handle resistive loads up to 3,600W, including electric blankets, kettles, hairdryers, and other heating devices. To enable it, access the Setting Mode, navigate with the DC Power Button ? until the ? icon appears, and press the AC Power Button ⚡ to enable the mode.

Note: The Power Lifting Mode is not enabled by default and is only suitable for resistive loads with a power rating between 2,400W-3,600W. Although the AC240P can handle higher power demands, its actual operating power remains at 2,400W. Also, the mode is not available when the AC240P is working with another AC240P unit in parallel.

9.6 AC Charging Mode

The AC240P supports 3 AC charging modes - Standard, Turbo, and Silent to fit your specific needs. In the Setting Mode, use the DC power button ? to navigate until the ⚡ (Turbo) or ? (Silent) icon starts flashing on the screen. Then, press the AC power button ⚡ to choose the charging modes. Please refer to the table below for useful instructions.

9.7 UPS Mode

With the UPS mode enabled, the AC240P can provide uninterrupted power to your essential appliances during a power outage. And there are four different modes available through the BLUETTI App, allowing you to choose the best option for your needs:

• Standard UPS Mode: In this mode, the AC240P and its expansion batteries (if any) are always charged using available solar or grid power, ensuring that they are ready to provide backup power in case of a grid failure. When the grid fails, the AC240P units seamlessly take over to keep your devices running without any interruption. Note: This mode is only available when two AC240P units are connected in parallel.
• Time Control UPS Mode: This mode allows you to program the AC240P to charge during off-peak hours when electricity is cheaper. Then, during peak hours when electricity is more expensive, the AC240P seamlessly switches over to power your devices, helping you to save money on your electricity bills.
• PV Priority UPS Mode: In this mode, the AC240P is mainly charged by solar energy to save power. You can also set a specific State of Charge (SoC) threshold. AC240P charges from the grid until reaching the designated SoC, and then seamlessly switches to solar charging for the remaining capacity.
• Customized UPS Mode: Tailor your UPS settings to match your unique needs in this mode. Create personalized schedules for charging and discharging, set battery SoC limits, and even control the grid charging switch and scheduled charging switch according to your diverse requirements.

9.8 Grid Self-adaption Mode

If you cannot charge the AC240P using a generator or unstable grid voltage because of unstable voltage, it is recommended that you enable the Grid Self-adaption Mode through the BLUETTI App to ensure a stable, safe charging experience for both the AC240P and your devices.

9.9 Max. Grid Input Current

The Max. Grid Input Current is set to 10A by default. If the grid current doesn't match this setting, adjust the setting in the BLUETTI App.

Attention: A single AC240P unit allows a maximum grid input current of up to 16A. If you need to increase the setting beyond the default 10A, please contact BLUETTI Customer Service and request a password to make the necessary adjustments.

9.10 Exit Setting Mode

To save your AC240P settings and exit the Setting Mode, press and hold down both the DC and AC Power Buttons ?⚡ at the same time. Note: If you do not perform any operation in 1 minute, the AC240P will automatically exit the Setting Mode, and no changes will be saved.

10. AC240P + B210P Expansion Connection

The AC240P unit supports up to 4 B210P expansion batteries, providing a total capacity of up to 10,443Wh. Follow these steps to connect the two units:

1. Make sure both the AC240P and B210P are turned off.
2. Connect them using the battery expansion cable.
3. Power the AC240P on and the B210P turns on automatically. The AC240P's screen displays the ? icon.

If you want to add more B210P units, please set up the system as shown.

Attention: The AC240P connects to the upper battery expansion port of B210P.

11. Parallel Operation

To increase your power output, you can connect two AC240P units in parallel. When connected in this way, the two units can deliver up to 4,800W of power. To connect them, please follow these steps:

1. Make sure both AC240P units are turned off.
2. Connect them using the parallel box.
3. Power on one AC240P unit, and the other unit will automatically turn on.

When you connect your parallel system to a wall outlet, your devices will get power from either the grid or the system, depending on their power demand. If the demand is lower than 4,000W, they'll get power directly from the grid. But if the demand is between 4,000W-4,800W, they'll draw from the system.

Note: All the settings made on one AC240P unit will be synchronized to the other unit. If you need to adjust the Max. Grid Input Current, please use the BLUETTI App and make the necessary changes. Charge the two AC240Ps using the Parallel Charging Cable (with parallel box in Optional Accessories) in parallel mode.

12. BLUETTI App

Scan the QR code below or search "BLUETTI" in the App Store or Google Play to download the BLUETTI App. For more details, please refer to BLUETTI APP INSTRUCTIONS.

[Link to download BLUETTI App from App Store or Google Play]

13. Specifications

AC Output

• Power: 2,400W (continuous), 2500W<load<3000W@2min, 3000W<load<3600W@10s, 3600W<load@500ms
• Voltage: 230VAC
• Current: 11A
• Frequency: 50Hz / 60Hz

DC Output

• Cigarette Lighter Port × 1: 12VDC / 10A
• USB-A × 2: 18W Max. (QC3.0: 5V/3A; 9V/2A; 12V/1.5A)
• USB-C × 2: 100W Max. (PD3.0: 5/9/12/15/20V 3A; 20V/5A, with built-in EMarker chip)
• RV Port × 1: 12VDC / 30A, 360W Max.

AC Input

• Voltage: 230VAC
• Current: 13A Max.
• Frequency: 50Hz / 60Hz

UPS

• Switching time: 20ms
• Power: 2,400W Max. (0%-80% in 45 minutes @ 15°C-25°C / 59°F-77°F)

DC Input

• Interface: 2-pin Aviation Socket
• Power: 1,200W Max.
• Current: 21A Max.
• Voltage: 11V to 60VDC

Battery Expansion Port

• Voltage: 44.8V to 57.6VDC
• Input Current: 60A Max.

Parallel Port

• Interface: 3-pin Aviation Socket + 8-pin Aviation Socket
• Output Current: 24A Max.

Radio Frequency

• WIFI: Operating Frequency 2412MHz-2472MHz, Modulation BPSK/QPSK/16QAM/64QAM, Max Transmit Power 18.59dBm.
• Bluetooth 4.2: Operating Frequency 2402MHz-2480MHz, Modulation DBPSK/DQPSK/CCK, GFSK,/4-DQPSK,8DPSK, Max Transmit Power 8.42dBm.

14. Button Operation Instructions

15. Troubleshooting

In the Setting Mode, press and hold the DC power button ? to switch the status page until the ❌ icon and the error code appear simultaneously on the screen. Please refer to the table below for helpful guidance.

Appendix 1: Estimating Operation Time

To estimate the operation time of the AC240P, consider the load you're applying: Operation time = Battery Capacity (Wh) × DoD × (Load Power + AC240P Self-consumption) / Conversion Efficiency.

Note: DoD refers to the depth of discharge. AC240P works at 95% DoD for longer battery life. Conversion efficiency is typically over 85% for AC240P. Please keep in mind that the estimated operation time provided is for reference purposes and may vary based on actual usage conditions. Factors such as low temperature and excessive loads can significantly affect the battery capacity, leading to a reduction in the average operation time.

Appendix 2: FAQ

• Q1: How do I know whether my devices will work well with this product?
  A: Please evaluate the total constant load of your devices. If it doesn't exceed the Max. output power of AC240P (2400W), you can use this power station to run your devices. Note: Some devices with built-in motors or compressors may start at 2-4 times the rated power, which can easily overload the AC240P.
• Q2: Can I use third-party solar panels to charge this product?
  A: Yes, you can. However, make sure your solar panels have an open circuit voltage of 11V-60V and are equipped with MC4 connectors. It's also important not to mix different types of solar panels.
• Q3: Can it charge and discharge at the same time?
  A: Yes. It supports pass-through charging. The AC240P comes with the premium LiFePO battery and proprietary Battery Management System to ensure that it can charge and discharge at the same time.
• Q4: Why is the charging power often too low?
  A: AC240P has a built-in intelligent BMS that automatically adjusts the charging power in response to the battery temperature and SoC, thus protecting the battery and extending its service life.

Contact Information

BLUETTI Support Channels:

• Social Media: @BLUETTI Support, @BLUETTI Official, @bluetti_official, @ bluetti_inc
• Email: sale-eu@bluettipower.com, sale-uk@bluettipower.com
• EU Address: Lise-Meitner-Straße 14, 28816 Stuhr, Deutschland
• UK Address: Unit 2 Northgate, Bolsover Business Park, Woodhouse Line, Chesterfield England S44 6BD

Company Information:

• POWEROAK GmbH
  Address: Lise-Meitner-Str. 14, 28816 Stuhr, Germany
  Mail: sale-de@bluettipower.com
  Customer Service (DE) Tel: +49 8006273016
  Service Hours: Monday to Friday 9:00 - 17:00 (local time)
• POWEROAK ENERGY UK CO.,LTD
  Address: Unit 2 NorthGate, Bolsover Business Park, Woodhouse Lane, Chesterfield England, S44 6BD
  Mail: sale-uk@bluettipower.com
  Customer Service (UK) Tel: +44 8000472906
  Service Hours: Monday to Friday 9:00 - 17:00 (local time)
• SHENZHEN POWEROAK NEWENER CO., LTD.
  Address: F19, BLD No.1, Kaidaer, Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China