BLUETTI AC180P Portable Power Station User Manual

Introduction and Safety

Thank you for choosing BLUETTI. This manual provides essential information for the safe and effective use of your AC180P Portable Power Station.

Important Safety Instructions:

⚠️ Warning: Always follow basic precautions when using this product, including:

• Read all instructions before use.
• Close supervision is necessary when used near children.
• Do not insert fingers or foreign objects into ports. Operate carefully and keep children away.
• Use only manufacturer-recommended attachments.
• Pull the plug, not the cord, to disconnect.
• Do not use damaged or modified batteries or equipment.
• Do not operate with damaged cords or plugs.
• Do not attempt unauthorized repairs; contact qualified service personnel.
• Unplug before servicing.
• Risk of explosive gases: follow battery manufacturer instructions and cautionary markings.
• Personal Precautions: Wear eye and clothing protection, avoid touching eyes, no smoking/flames near battery, be cautious with metal tools near battery, work in ventilated areas for internal charging, avoid battery liquid contact, keep away from heat sources/flammable environments, use identical replacement parts, do not operate in wet conditions, ensure ventilation, do not stack, do not move during operation.
• In case of fire, use only a dry powder extinguisher.
• DANGER: This device is intended for indoor use only.

Grounding Instructions:

This product must be grounded. It is equipped with a grounding conductor and plug. Plug into a properly installed and grounded outlet according to local codes. Improper grounding can cause electric shock. Consult a qualified electrician if unsure. Do not modify the plug.

Legal and Regulatory Requirements:

• Transportation, wiring, and maintenance must comply with applicable laws, regulations, and standards.
• User-provided materials and tools must meet specified requirements.

Storage and Usage:

• For storage longer than 3 months, charge to 40%-60% SoC.
• Store in a cool, dry place (ideal 10°C-30°C). Safe charging/discharging range is -20°C to 40°C. Avoid harsh temperatures for extended periods.
• Fully cycle the unit every 6 months for battery health.
• If SoC drops to 0: shut down immediately, charge within 48 hours, and keep battery at 5°C-35°C for 24 hours before charging.
• Recommended charging via AC source. Solar charging requires >100W output.

What's In The Box

Standard Packaging:

Optional Accessories:

• TYPE-C Cable (5A/100W, 2m)
• Cigarette Lighter to 5521 Cable (for 12V devices)
• Cigarette Lighter to Clamp Cable (for lead-acid battery)
• Lead-acid battery charging cable (DC7909)

Product Overview

Diagram:

The BLUETTI AC180P is a portable power station featuring:

• 1. DC Input: For solar or other DC power sources.
• 2. DC Power Button: Turns DC outputs (cigarette lighter, USB, wireless charging) on/off.
• 3. LCD Screen: Displays system status, power input/output, battery level, etc.
• 4. Power Button: Turns the unit on. Press to turn the LCD screen on/off. Hold for over 2 seconds to turn the unit off.
• 5. AC Power Button: Turns AC outputs on/off.
• 6. Wireless Charging Pad: For charging compatible devices wirelessly.
• 7. AC Output: Multiple AC outlets for powering appliances.
• 8. Grounding Pole (Grounding screw: M5*10): For connecting the grounding cable.
• 9. AC Input Fuse: Protects the AC input.
• 10. AC Input: Port for AC charging.
• 11. Cigarette Lighter Port: 12V/10A output for vehicle devices.
• 12. USB-C Port: Supports PD 100W charging.
• 13. USB-A Port: Multiple USB-A ports for charging devices.

The AC180P features an 1800W pure sine wave inverter and a 1152Wh LiFePO4 battery, suitable for camping, van life, and more. It offers 4 AC output ports, 5 USB ports (4 USB-A, 1 USB-C), a 12V/10A cigarette lighter port, and a wireless charging pad. Recharging is supported via up to 1440W AC input and 500W DC input. The unit is controllable via the BLUETTI app using Bluetooth connectivity.

Specifications:

Operating Instructions

DANGER: This device is intended for indoor use only. Do not use outdoors.

Buttons:

• Power Button (PWR): Press to start the AC180P. Press to turn the LCD screen on/off. Hold for over 2 seconds to turn off the AC180P.
• DC Power Button: Turns DC output (cigarette lighter, USB, wireless charging) on/off.
• AC Power Button: Turns AC output on/off.

Settings:

Enter Setting mode by pressing and holding the AC and DC power buttons for about 2 seconds (with AC output off).

• Frequency Switching: In Setting mode, press the AC Power button to switch between 50Hz and 60Hz. The current frequency is displayed on the LCD screen.
• Power Lifting Mode: Enabled by default. To enable it, press and hold the AC Power button for about 2 seconds in Setting Mode, or enable via the BLUETTI app. This mode allows the AC180P to run high-drain pure resistive loads (≤2700W) while its rated output power remains 1800W. Note: This mode is not available when charging AC180P via an AC source; the source bypasses the inverter.
• Grid Enhancement Mode: Enable in the BLUETTI app. Ensures stable AC input by adapting to voltage fluctuations. Turn off when using as a UPS to ensure instant emergency power.
• ECO Mode: When enabled, the AC/DC output automatically turns off if the AC180P has low or no load for a period. The ECO icon is displayed on the screen. In Setting mode, press the DC Power button to configure ECO mode settings (power threshold and duration for AC/DC output auto-off).

Exiting Setting Mode: Press the AC and DC power buttons simultaneously. The unit exits Setting mode automatically after 1 minute of inactivity, and changes are not saved.

Checking Error Codes: Press the AC and DC power buttons simultaneously for about 2 seconds, then hold the AC power button to view the current error code (e.g., E001).

LCD Screen Indicators:

The LCD screen displays various indicators:

• Input Power: Displays the current power input.
• Battery Capacity: Shows the remaining battery percentage.
• Remaining Time Indicator: Estimates the remaining operating time.
• Output Power: Displays the current power output.
• AC Indicator: Shows when AC output is active.
• DC Indicator: Shows when DC output is active.
• AC Input Connected: Indicates when AC power is connected.
• ECO Mode: Displays when ECO mode is active.
• Power Lifting Mode: Displays when Power Lifting mode is active.
• Fan: Indicates fan operation.
• Bluetooth: Shows Bluetooth connection status.
• Wireless Charging: Indicates wireless charging status.
• Turbo Charging: Displays when Turbo charging is active.
• Low Voltage Alert: Indicates a low voltage condition.
• Temperature Anomaly Alert: Indicates abnormal temperature.
• Short Circuit Alert: Indicates a short circuit.
• Overload Alert: Indicates an overload condition.
• AC Frequency: Displays the AC output frequency (50Hz/60Hz).

Charging:

The AC180P supports four charging methods: AC, solar, car (cigarette lighter), and generator.

AC Charging (Wall Outlet):

Plug the AC180P into a standard wall outlet. It supports three charging modes:

• Turbo Charging: For rapid replenishment.
• Standard Charging: Friendly to the battery.
• Silent Charging: Quiet, low-power operation for extended battery life. (Enable via BLUETTI app).

Solar Charging:

Connect solar panels (in series or parallel) using the solar charging cable. Ensure panels comply with: Voc: 12V-60V, Input Current: 10A Max., Input Power: 500W Max. ⚠️ Warning: Open circuit voltage exceeding 60V will damage the device and is not covered by warranty.

Car Charging:

Connect the AC180P to a vehicle's 12V cigarette lighter port using the car charging cable. ⚠️ Warning: Ensure the cigarette lighter plug is fully inserted to prevent safety risks.

Generator Charging:

Connect the AC180P to a generator using the AC charging cable.

Discharging:

AC Output:

The AC180P provides up to 1800W AC power through its 4 AC output ports (2 for EU version). It can handle a surge of 2700W.

DC Output:

• 12V/10A cigarette lighter port.
• USB-C (PD 100W).
• USB-A (30W total, 15W Max. per port).
• Wireless charging pad (15W Max.).

Estimated Operation Time:

Operation time depends on factors like ambient temperature, discharge rate, battery capacity, and load characteristics.

Calculation formula:

• For high power loads (e.g., 600W): Operation time (estimated) = Battery capacity (Wh) × DoD × η ÷ (load power)
• For low power loads (e.g., 40W): Operation time (estimated) = Battery capacity (Wh) × DoD × η ÷ (load power + self-consumption of AC180P)

Notes:

• Self-consumption of AC180P is approximately 15W.
• DoD (Depth of Discharge) is typically 90% for optimal battery life.
• η (conversion efficiency) is greater than 85% for AC180P.
• Example: A 40W refrigerator can run for approximately 20 hours (1440Wh × 90% × 85% ÷ (40W + 15W) ≈ 20 hours).
• Low temperatures and excessive loads can significantly impact battery capacity and reduce operation time.

BLUETTI App:

Download the BLUETTI app from the App Store or Google Play. The AC180P supports Bluetooth connection, allowing you to monitor and control the unit remotely via your mobile phone or smart device. Refer to the BLUETTI APP INSTRUCTIONS for more details.

Appendix

FAQS:

• Device Compatibility: Evaluate your devices' total constant load against the AC180P's 1800W output. Note that devices with motors/compressors may have higher startup surge requirements.
• Third-Party Solar Panels: Yes, provided they have an open circuit voltage of 12V-60V and MC4 connectors. Do not mix different types of panels. Charge time varies with weather conditions.
• Simultaneous Charge/Discharge: Yes, the AC180P supports pass-through charging.
• ECO Mode: Helps save power by automatically turning off AC/DC output on low/no load. It can be enabled/disabled on the screen. Power thresholds and duration for auto-off can be set.
• Low Charging Power: The intelligent BMS adjusts charging power based on battery temperature and SoC to protect the battery and extend its lifespan.
• Quieter Charging: Select "Silent" charging mode in the BLUETTI app.
• Grid Enhancement Mode: Useful for unstable AC sources (grid/generator) to adapt to voltage fluctuations.

Troubleshooting:

Abbreviations:

• MPPT: Maximum Power Point Tracking
• SoC: State of Charge
• UPS: Uninterruptible Power Supply
• AC: Alternating Current
• DC: Direct Current
• PV: Photovoltaic (Solar Panels)
• DoD: Depth of Discharge

FCC Warning:

This equipment complies with FCC Part 15 limits for Class B digital devices, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and radiates radio frequency energy. If not installed and used correctly, it may cause interference to radio communications. If interference occurs, try to correct it by: reorienting/relocating the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

FCC RF Exposure Warning Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and body.

IC Statement:

This device contains licence-exempt transmitter(s)/receiver(s) complying with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) device must not cause interference, and (2) device must accept any interference. This equipment complies with IC exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 10cm between the radiator and body. This Class B digital apparatus complies with Canadian ICES-003.

Contact and Warranty Information

For more information, visit: https://www.bluettipower.com

Social Media:

• YouTube: BLUETTI Support, @ BLUETTI Official
• Twitter: @bluetti_inc
• Facebook: @bluetti.inc
• Instagram: @bluetti_official
• Email: service@bluettipower.com

Manufacturer: SHENZHEN POWEROAK NEWENER CO., LTD.

USA Agent: BLUETTI POWEROAK INC.

Warranty Policy

Thank you for choosing BLUETTI. Please read the terms and conditions. The warranty period starts from the date of product receipt.

*Only applies to products purchased directly from the official BLUETTI website. For purchases from other channels, the warranty is valid for 24 months. Register for BLUETTI VIP for a free warranty extension.

The warranty does not cover:

• Issues arising after the warranty period has expired.
• Damage resulting from improper use, maintenance, or storage.
• Unauthorized disassembly, repair, or modifications.
• Damage caused by force majeure events.

Valid Proof of Purchase:

1. Order number from authorized platforms.
2. Sales invoice or order confirmation email showing product description, price, and sales channel.
3. Defective item's serial number and/or visible proof (e.g., short video) depicting the defect.

How to Return/Replace/Repair:

1. Contact BLUETTI for a Return Merchandise Authorization (RMA) Number. Returns without authorization will not be accepted.
2. Write the RMA number on the outer package of the parcel.
3. Send the defective product to the local warehouse.

Warranty Card Information:

Customer Name: [Field for input]

Company (optional): [Field for input]

Address: [Field for input]

City: [Field for input], State: [Field for input], Zip: [Field for input]

Phone: [Field for input], Fax: [Field for input]

Email Address: [Field for input]

Purchase From: [Field for input]

Name of Tech Support Spoken To: [Field for input]

Date: [Field for input]

RMA #: [Field for input]

Model Name: [Field for input]

Serial #: [Field for input]

Purchase Date: [Field for input]

Problem Description: [Field for input]