Pecron E3000 User Manual

Function Introduction

This section describes the main functions and ports of the Pecron E3000 portable power station.

Key Components:

• LCD Display: Shows operational status, battery level, and other information.
• DC 12V~18V Charging Port: For charging the unit with a DC input voltage between 12V and 18V.
• DC 32V~95V Charging Port: For charging the unit with a DC input voltage between 32V and 95V, typically used for solar panels.
• AC 100V~120V Output: Standard AC power outlets for powering devices.
• DC 12V/USB/ Wireless Switch: Controls the DC output ports (Auxiliary Outlet, 5525 Output), USB ports, and the wireless charger.
• AC 100V~120V Switch: Controls the AC output sockets.
• DC12V10A Auxiliary Outlet: A 12V DC outlet with a 10A capacity.
• DC12V5525 Output: A 12V DC output port with a 5.5x2.5mm connector.
• USB-A/USB-C Ports: Multiple USB ports for charging various devices.
• Wireless Charger: A pad for wirelessly charging compatible devices.

Specifications

How to Use

Operating the Pecron E3000 is straightforward. Ensure the unit is placed on a stable surface and all connections are secure before operation.

Powering On/Off

• DC/USB/Wireless Switch: Press and hold this button to turn on or off the DC output ports, USB ports, and the wireless charging function.
• AC Switch: Press and hold this button to turn on or off the AC output sockets. For energy conservation, it is recommended to turn off the AC function when no AC devices are connected.

LCD Smart Display

The LCD display provides real-time information about the unit's status:

• Temperature Alarm: An icon (?️) will flash if the unit's operating temperature exceeds the safe limit. The unit may stop working to protect itself.
• Battery SOC (%): Displays the current battery State of Charge.
• Voltage (V): Shows the current voltage output or input.
• AC Overload Alarm: An icon (⚡) will flash if the total power consumption of connected AC devices exceeds the unit's rated capacity (2000W). The AC output will stop.
• Charge Indicator: Shows when the unit is actively receiving power (⚡).
• Discharge Indicator: Shows when the unit is supplying power (⬇️).
• Net Input/Output Wattage: Displays the total power being drawn or supplied.
• DC Out: Indicates the status of DC outputs.
• AC Input Wattage(W)/Voltage(V): Shows power being supplied to the unit via AC input.
• AC Out PF Value/Remaining Charging/Discharging Time(Hrs): Displays power factor, estimated time until fully charged, or estimated time until the battery is depleted based on current load.

Temperature Considerations

The E3000 is designed to operate within a temperature range of -20°C to 45°C (-4°F to 113°F). If the ambient temperature exceeds 45°C (113°F), the temperature alarm will activate, and the unit may cease operation to prevent damage.

AC Overload Protection

The E3000 can power devices with a combined consumption of up to 2000 watts. If the connected load exceeds this limit, the AC overload alarm will flash, and the AC output will be disabled. Remove overloaded devices to resume normal operation.

Packing List

Your Pecron E3000 package should contain the following items:

• Pecron E3000 Unit x1
• AC Charger x1
• MC4 Solar Charging Cable (LSMC4-5GX16) x2
• Car Charging Cable x1

Note: An additional AC charger can be purchased separately from the Pecron website if needed.

Recharge Time

The recharge time varies depending on the charging method:

• Wall Charger (AC): Approximately 5-6 hours for a full charge. Using two AC chargers (if available) can reduce charging time to approximately 2.5-3 hours.
• Car Charging Cable: Approximately 31 hours for a full charge from a vehicle's 12V outlet.

Solar Charge Time

Solar charging times depend on the wattage and number of solar panels used, as well as environmental conditions. The E3000 features a built-in MPPT charge controller supporting 32V-95V input and up to 1200W total solar power.

• With Pecron 200W Solar Panels:
  • 1 x 200W Panel: Approx. 23-24 Hours
  • 2 x 200W Panels (400W total): Approx. 11-12 Hours
  • 3 x 200W Panels (600W total): Approx. 7-8 Hours
  • 4 x 200W Panels (800W total): Approx. 5-6 Hours
  • 6 x 200W Panels (1200W total): Approx. 3-4 Hours

Note: Solar charging times are estimates and can vary based on sunlight intensity, panel angle, and weather.

Using Solar Panels to Charge the E3000

The E3000 offers flexible solar charging options via its DC5521 and GX16MF-5 ports. It is crucial to adhere to voltage and wattage limits to prevent damage.

Charging Ports and Limits:

• 1x DC5521 Charging Port: Supports PV/DC input from 12V to 18V, with a maximum input of 100W. The Open Circuit Voltage (VOC) of the solar panel must be less than 25V.
• 2x GX16MF-5 Charging Ports: Each port supports PV input within a voltage range of 32V to 95V, with a maximum input of 600W per port. The combined VOC of the solar panel array connected to a single port must not exceed 95V. Exceeding this limit will damage the unit.

Solar Panel Connection Examples (Using Pecron 200W /36V Panels):

Important: Always ensure the total Open Circuit Voltage (VOC) of your solar panel array does not exceed the specified limits for each port.

1. Charging with One 100W /18V Solar Panel:

Connect one 18V, 100W solar panel to the DC5521 charging port.

2. Charging with One 200W /36V Solar Panel:

Connect one 36V, 200W solar panel to one of the GX16MF-5 charging ports using an MC4 solar charging cable.

3. Charging with Two 200W /36V Solar Panels (400W Total):

Connect two 36V, 200W solar panels in series (resulting in approximately 72V). Connect this series to one of the GX16MF-5 charging ports using an MC4 solar charging cable.

4. Charging with Three 200W /36V Solar Panels (600W Total):

Connect three 36V, 200W solar panels in series (resulting in approximately 108V). Connect this series to one of the GX16MF-5 charging ports using an MC4 solar charging cable. WARNING: The GX16MF-5 ports have a maximum operating voltage limit of 95V. Connecting panels with a combined VOC exceeding 95V can cause permanent damage to the unit. Verify your panel specifications and configuration carefully.

5. Charging with Four 200W /36V Solar Panels (800W Total):

Connect two pairs of 36V, 200W solar panels in series (each pair resulting in approximately 72V). Connect these two series pairs in parallel to the two GX16MF-5 charging ports using MC4 solar charging cables.

6. Charging with Six 200W /36V Solar Panels (1200W Total):

Connect two groups of three 36V, 200W solar panels in series (each group resulting in approximately 108V). Connect these two series groups in parallel to the two GX16MF-5 charging ports using MC4 solar charging cables and appropriate Y-branch connectors. WARNING: The GX16MF-5 ports have a maximum operating voltage limit of 95V. Connecting panels with a combined VOC exceeding 95V can cause permanent damage to the unit. Verify your panel specifications and configuration carefully.

If you have any questions regarding solar panel compatibility or connection, please contact Pecron support at support@pecron.com.

Frequently Asked Questions (FAQs)

• Q1: What kind of battery is used in the E3000? How long will it last?
  A: The E3000 utilizes high-quality UL certified automotive-grade battery cells. It can retain 80% of its capacity after 1000 complete charge cycles.
• Q2: What devices can the E3000 power?
  A: The E3000 can power most devices with a power consumption of less than 2000 watts.
• Q3: Can the E3000 be used as a UPS (Uninterruptible Power Supply)?
  A: No, the UPS function is not supported by this unit.
• Q4: Can the E3000 be charged while discharging?
  A: Yes, the E3000 can power devices while it is being charged. However, if the power being discharged is greater than the power being charged, the battery will eventually deplete.
• Q5: How do I calculate the E3000's running time?
  A: Running Time = Total Capacity (3108Wh) * 0.85 (Depth of Discharge) / Loading Power (Watts). The 0.85 factor accounts for optimal battery usage.
• Q6: Can I use the E3000 and charge it indoors?
  A: Yes, the E3000 is designed to be safe for indoor use and charging.
• Q7: Does the E3000 have a built-in MPPT controller?
  A: Yes, it features two independent 600W (PV 32V~95V) MPPT charge controllers and one step-up 100W (PV 18V) MPPT charge controller. The Open Circuit Voltage (VOC) of connected solar panels should not exceed 95V.
• Q8: What kind of maintenance does the E3000 require?
  A: Ensure the unit is charged in time when the battery is low. If not in use, charge it at least once every six months to maintain battery health.
• Q9: How should I store the E3000?
  A: Do not store, charge, or use the E3000 near heat sources, flammable or corrosive gases, or immerse it in water. Keep it in a cool, dry place, away from liquids.

Disclaimer and Warnings

Please read this user manual thoroughly before using the product. Failure to follow instructions may increase the risk of injury, death, or property damage. By using the device, you accept all terms and conditions outlined in this document.

General Warnings:

• Do not place the device near heat sources like fires or furnaces.
• Do not immerse in any liquid or expose to rain or wet conditions.
• Avoid using the battery in environments with strong static electricity or electromagnetic interference.
• Do not attempt to disassemble or puncture the product with sharp objects.
• Be aware of potential short circuits caused by vermin, water, or other fluids contacting wiring.
• Only use accessories and parts provided or recommended by Pecron. Visit www.pecron.com for a complete list.
• Strictly adhere to the ambient temperature limits specified in the manual. High temperatures can lead to self-combustion, while low temperatures can severely degrade performance.
• Do not stack heavy objects on the product.
• Ensure air vents are not blocked during use. Avoid using the device in non-ventilated or dusty spaces.
• Avoid impacts, falls, and violent vibrations. If the unit experiences a major exterior impact, turn it off immediately and stop using it. Secure the unit firmly during transportation.
• If the device accidentally gets immersed in water: place it in a safe, open area, keep a distance until it is completely dry, do not reuse, and dispose of it properly according to local regulations.
• In case of fire, use extinguishing equipment in the following order: water or mist, sand, fire blanket, dry chemical, or carbon dioxide extinguisher.
• Clean the device surface with a dry cloth only.
• Handle the device with care to prevent damage from falls. If damaged by a fall, turn it off immediately, place it in an open area away from combustibles and crowds, and dispose of it according to local laws.
• Store the device out of reach of children and pets.

Disposal

Proper disposal of the E3000 and its battery is essential:

1. When possible, completely discharge the battery before disposal. Place the product in a designated battery recycling box. Batteries contain dangerous chemicals and must not be disposed of in ordinary trash. Follow local laws and regulations for battery recycling.
2. If the battery cannot be fully discharged due to product failure, do not dispose of it directly in a recycling box. Contact a professional battery recycling company.
3. Over-discharged batteries may not be able to start. Dispose of them according to standard disposal principles.

Warranty Exclusions

Pecron's warranty does not cover issues arising from:

• Misuse, abuse, or unauthorized modifications.
• Accidental damage.
• Use for purposes other than normal consumer use as authorized in Pecron's product literature.