go-e Charger CORE EU Declaration of Conformity

Manufacturer and Address

Manufacturer: go-e GmbH

Address: Satellitenstraße 1, 9560 Feldkirchen in Kärnten, Austria

Product Description and Identification

This Declaration of Conformity is issued for the following product:

Product Name / Type: go-e Charger CORE | 11 kW / 22 kW

Short Description: This is a charger for electric vehicles designed for Mode 3 charging. It incorporates RFID (13.56 MHz), WLAN (2412–2472 MHz), GPRS/EDGE (E-GSM-900, DCS-1800), and LTE (B1, B3, B5, B7, B8, B20) technologies. The device is intended for stationary installation by a qualified electrician. Each unit is identified by a serial number beginning with CR-10-6xxxxx.

Charging Box Technical Specifications

Specification	Details
Max. Power	11 kW / 22 kW
Communication Interfaces	WLAN 802.11b/g/n 2.4 GHz, RFID, GPRS/EDGE (E-GSM-900, DCS-1800) and LTE (B1, B3, B5, B7, B8, B20)
Frequency Range(s) in Operation	WLAN: 20/40 MHz: 2412 – 2472 MHz / 2412 - 2472 MHz @19.13dBm LTE-FDD B1: 1920 - 1980 MHz UL / 2110 - 2170 MHz DL @23dBm LTE-FDD B3: 1710 - 1785 MHz UL / 1805 - 1880 MHz DL @23dBm LTE-FDD B5: 824 - 849 MHz UL / 869 - 894 MHz DL @23dBm LTE-FDD B7: 2500 - 2570 MHz UL / 2620 - 2690 MHz DL @23dBm LTE-FDD B8: 880 - 915 MHz UL / 925 - 960 MHz DL @23dBm LTE-FDD B20: 832 - 862 MHz UL / 791 - 821 MHz DL @23dBm GPRS / EDGE E-GSM-900: 880 - 915 MHz UL / 925 - 960 MHz DL @33dBm GPRS / EDGE DCS-1800: 1710 - 1785 UL / 1805 - 1880 MHz DL @30dBm RFID: 13.56 MHz (max. 60dBµA/m at 10m)

Declaration of Conformity Statement

The manufacturer declares sole responsibility for the conformity of the object described above with the following relevant EU harmonization legislation when used as intended:

Directive 2014/53/EU + (EU) 2022/30 (Radio Equipment Directive)
Directive 2011/65/EU (RoHS)

Applied Harmonized Standards

Health and Safety

EN IEC 61851-1:2019 + AC:2023
EN 62311:2020

Electromagnetic Compatibility

ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-3 V2.3.2 (2023-01)
ETSI EN 301 489-17 V3.2.4 (2020-09)
EN 301 489-52 V1.2.1 (2021-11)
EN IEC 61851-21-2:2021

Radio Spectrum Usage

ETSI EN 300 330 V2.1.1
ETSI EN 300 328 V2.2.2
ETSI EG 203 367 V1.1.1

Cybersecurity

EN 18031-1:2024

RoHS

EN IEC 63000:2018

Signed for and on behalf of

Place, date: Feldkirchen in Carinthia, 23.07.2025

Signatory: Erik Yesayan, CEO go-e GmbH

	go-e Charger CORE EU Declaration of Conformity EU Declaration of Conformity for the go-e Charger CORE (11 kW / 22 kW), detailing technical specifications, applicable directives, and harmonized standards.
	go-e Charger Gemini flex 2.0 EU Declaration of Conformity EU Declaration of Conformity for the go-e Charger Gemini flex 2.0 electric vehicle charger by go-e GmbH, detailing technical specifications, frequency ranges, connectivity, and compliance with EU directives and harmonized standards.
	go-e Charger CORE Installation and Operating Manual Detailed installation and operating manual for the go-e Charger CORE electric vehicle wallbox. Covers setup, safety, features, and troubleshooting for efficient EV charging.
	go-e Charger CORE: Quick Reference Guide for Safe Installation and Use This quick reference guide provides essential information for the safe installation, operation, and maintenance of the go-e Charger CORE electric vehicle charging station. It covers product overview, installation steps, safety regulations, and support contact details.
	go-e Charger CORE Installations- og betjeningsvejledning Komplet installations- og betjeningsvejledning for go-e Charger CORE, en smart ladestation til elbiler. Lær om installation, drift, sikkerhed, tekniske specifikationer og smarte funktioner.
	go-e Charger CORE: Installation and Operating Manual This comprehensive manual provides detailed instructions for the installation and operation of the go-e Charger CORE electric vehicle charging station. It covers safety guidelines, technical specifications, commissioning, smart features, and troubleshooting for optimal use.
	go-e Charger Gemini flex 2.0: Simple and Safe Electric Vehicle Charging Discover the go-e Charger Gemini flex 2.0 for flexible and safe electric vehicle charging. Learn about its features including charging at low prices, using solar energy, and dynamic load balancing. Includes adapter set, wall mount, and charging cable.
	go-e Charger CORE: Installations- und Bedienungsanleitung Umfassende Installations- und Bedienungsanleitung für die go-e Charger CORE Wallbox/Ladestation für Elektrofahrzeuge. Erfahren Sie mehr über Funktionen, Installation, Sicherheit und Support.