Oraimo Riff OEB-E02D True Wireless Stereo Earbuds

Internal Use

For more information, please visit: www.oraimo.com

Caution:

• Use carefully with earphones; excessive sound pressure can cause hearing loss.
• Risk of explosion if battery is replaced by an incorrect type; dispose of used batteries according to instructions.
• Do not expose batteries to fire or hot ovens, or subject them to mechanical crushing or cutting, as this can result in an explosion.
• Avoid leaving batteries in extremely high or low temperature environments, which can result in an explosion or leakage of flammable liquid or gas.
• The product shall only be connected to a USB interface of version USB 2.0.
• EUT Temperature: 0℃~+45℃ (Standalone). 0~+40℃ (with adapter).
• To prevent possible hearing damage, do not listen at high volume levels for long periods.
• USB cable is shielded.

Operating Frequency: Bluetooth: 2402-2480MHz (TX/RX)

Modulation mode: GFSK, π/4-DQPSK, 8DPSK

RF output power: BT: 1.94dBm(Left), 3.6dBm(Right)

EU Declaration of Conformity

In accordance with Annex VI of Directive 2014/53/EU of the European Parliament and of the Council.

1. Radio equipment: Model: OEB-E02D, Product: True Wireless Stereo Earbuds, Trade name or Brand: oraimo, Software/Hardware number: BS501ZE-0EB-E02D_BT8896A_20210917_V3.0.5/ BT: V01-00; CHG: V00-00
2. Manufacturer: ORAIMO TECHNOLOGY LIMITED, Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
3. This declaration of conformity is issued under the sole responsibility of the Manufacturer.
4. The object of the declaration is the radio equipment described above.
5. The object of the declaration is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED).
6. Relevant harmonised standards: Article 3.1a Health: EN 62479:2010, Article 3.1a Electrical Safety: EN62368-1:2014+A11:2017, Article 3.1b: ETSI EN 301 489-1 V2.2.3 (2019-11), ETSI EN 301 489-17 V3.2.4 (2020-09), Article 3.2: ETSI EN 300 328 V2.2.2 (2019-07)
7. Notified Body: Eurofins Electrical and Electronic Testing NA, Inc., Notified Body Number: 0980, Assessment Performed: Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3
8. Accessories and components: User instructions are provided in the User Manual. Software and Hardware versions are specified above.
9. Additional information: This equipment can be operated in all Member States without infringing applicable requirements on the use of radio spectrum. No restrictions on putting this equipment into service or requirements for authorization of use.

On behalf of: ORAIMO TECHNOLOGY LIMITED

Place and date of issue: Shenzhen, 2021-09-22

Name, Function: Yiting, Luo / Manager

Signature: Yiting. Luo

FCC Caution

(1) Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Customer Service

365 DAYS WARRANTY

Email: hello.ab@oraimo.com

Warranty Certificate

Name:

Address:

Tel. No.:

Date of purchase: (dd/mm/yy)

Store name:

Warranty period:

Warranty Terms & Conditions

All quality-related defects on items sold directly by oraimo or oraimo's authorized resellers are covered by an extensive warranty, starting from the date of purchase.

Oraimo's limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.

This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this product.

Warranty is for the primary product only and not transferable. Any free additional product(s) are not covered in this warranty.

* If the product fails regardless of usage in compliance with the instruction manual and other written precaution, replacement will be provided free of charge.

To receive replacement, bring the warranty certificate and the product itself to the store from where you have purchased the product.

Oraimo Riff OEB-E02D

User Manual

Please read this Guide carefully before using the product

Package Contents

• Charging Case x 1
• True Wireless Earbuds x 2
• Type-C Charging Cable x 1
• Pair of Eartips x 2

Product Overview

Earbud:

• ① Earbud Status Indicator
• ② Multi-Function Touch Sensor
• ③ Microphone
• ④ Type-C Charging Port

Charging Case:

• ⑤ Remove The Protective Film
• ⑥ Earbud
• ⑦ Case Status Indicator
• ⑧ Reset Button

Basic Product Specifications

Earbuds

• Music play time: Up to 4.5 hours
• Talk time: Up to 3 hours
• Battery capacity: 35mAh (each earbud)
• Charging time: Approx. 1.5 hours
• Range: ≥ 10m
• Driver (full range): 10mm x 2
• Standby time: Up to 40 hours

Charging Case

• Charge times for earbuds: Up to 2.5 times
• Battery capacity: 300mAh
• Charging time: Approx. 2 hours

Using Your Earbuds

Earbud Status Indicator

Case Status Indicator

Controls

• Play/Pause: Tap on one earbud twice (X2)
• Previous track: Tap and hold on the left earbud for 2 seconds (2s)
• Next track: Tap and hold on the right earbud for 2 seconds (2s)
• Activate Voice Assistant: Tap one earbud for three times (X3)
• Exit Voice Assistant: Tap one earbud once or for three times (X1 or X3)
• Answer/End a call: Tap on one earbud twice (X2)
• Reject call: Tap and hold on one earbud for two seconds (2s)

Pairing

BT Pairing:

• Make sure the distance of the earbuds and your device is less than 1 metre (3.3 feet) at the first time of connection.
• Earbuds will turn on and enter pairing mode automatically when opening the charging case.
• When turned on, the earbuds will automatically connect to the last connected device if available. If not, the earbuds will enter pairing mode.

Charging Your Case

Use the included Type-C charging cable to charge the case.

Fully charge the case for 1.5 hours.

Charging Your Earbuds

Earbuds will be charged automatically once they are returned to the charging case with the lid closed.

Clear Pairing List

If you want to clear the pairing list, long press the reset button for 6s when both earbuds are inside the case.

Turn On

Earbuds will turn on and enter pairing mode automatically when opening the charging case.

Turn Off

The earbuds turn off automatically when placed back into the charging case.

The earbuds will automatically turn off after 2 minutes if no device is connected.

Considerate Hints

• 1. Do not turn up the volume to a fair high level constantly as this could shorten the service life of this product or impair your hearing.
• 2. When encountering any fault during operation, please cut off the power supply and disconnect the Type-C cable to prevent further damage to the product or other components.
• 3. The wireless transmission range or connectivity could be affected by low battery power. In that case, please recharge immediately.

Attention

• Use original or certified cables
• Do not expose to liquids
• Do not disassemble
• Avoid dropping
• Avoid extreme temperatures
• Do not use the product outdoors during a thunderstorm
• Do not use any corrosive cleaner/oil to clean