Arenti OUTDOOR1 Quick Guide

Quick start guide

• 1. Packing list
• 2. Product description
• 3. Installation
• 4. Product configuration
• 5. Legal notice

1. Packing list

• Camera X1
• Power adaptor X1
• Screw package X1
• Quick guide X1
• Warning sticker X2

2. Product description

• 1. SD card slot
• 2. Reset button
• 3. Speaker
• 4. LED indicator
• 5. Microphone
• 6. IR light & warm light

Notice: To reset the device, press and hold the reset button for 5s. The camera beeps when the operation is complete.

LED indicator of camera:

3. Installation

Install the camera with the included screws.

[Diagram showing the Arenti OUTDOOR1 camera being mounted to a wall using screws.]

4. Product configuration

1. Turn on your camera.
2. Connect your smartphone to the Wi-Fi network.
3. Download Arenti app from the App Store or Google Play depending on your device.
4. Launch the App and sign up for the first use.
5. Follow the on-screen instructions to add your camera.

[QR code for downloading the Arenti app.]

Notice: If you have multiple cameras, please follow step 5 again to add devices one by one. To change Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.

Specifications

5. Legal notice

Support

Visit: www.arenti.com

Symbols

• Direct current (DC) [DC symbol]
• Waste Electrical and Electronic Equipment (WEEE) symbol: Do not dispose of batteries or out-of-order products with household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city. [WEEE symbol]

EU Declaration of Conformity

CE marking indicating compliance.

Hereby, Arenti, declares that the radio equipment type 'OUTDOOR1' is in compliance with the Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following Internet address: www.arenti.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Copyright and Trademarks

© 2022 Arenti. All rights reserved. All trade names are registered trademarks of respective companies. Apple, the Apple logo, iPhone are trademarks of Apple Inc. registered in the U.S. and other countries. Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.

Document Version: V1.0 202204