Quick Start Guide
This guide provides instructions for setting up your Arenti GO1 camera.
1. Packing List
- Camera 1X
- Screws 3X
- USB cable 1X
- Quick start guide 1X
- Reset key 1X
- Power adaptor 1X (optional)
2. Product Description
Description of the Arenti GO1 camera:
- 1. LED indicator
- 2. Lens
- 3. Microphone
- 4. PIR (Passive Infrared sensor)
- 5. Speaker
- 6. Power key
- 7. DC5V USB port
- 8. Reset button
- 9. Micro SD card slot
Notice
To reset the device, press and hold the reset button for 5 seconds. The camera beeps when the operation is complete.
LED Status Indicators:
| Indicator Status | Meaning |
|---|---|
| Flashing red light (slow) | Waiting configuration |
| Flashing red light (fast) | Searching WiFi network |
| Fix blue light | Camera connected to WiFi |
| Flashing blue light | Access point mode |
3. Camera Configuration
- Turn on your camera by plugging in the power adapter.
- Connect your smartphone to the Wi-Fi network.
- Download the "My Arenti" app from the Apple Store or Android Play Store, depending on your device.
- Launch the "My Arenti" app and sign up for the first use.
- Follow the on-screen instructions within the app to add your camera.
App screenshots show the process of adding a new device, selecting the camera type, and connecting.
Note
If you have multiple cameras, repeat Step 5 to add devices one by one.
To change the Wi-Fi network, restore the camera to factory settings and then follow Step 5 to add the camera again.
For more information, please download the user manual at www.arenti.com.
Specifications
| Feature | Specification |
|---|---|
| Sensor type | 1/2.9" CMOS |
| Min. Brightness | Color 0.01Lux@F1.2; Black and white 0.001Lux@F1.2 |
| Resolution | 2 Mega pixels |
| Lens | 2.4mm F2.0 |
| Shutter | 1/25~1/100,000 per second |
| Infrared | High power LED with ICR |
| Infrared distance | 10 mètres |
| Wide Angle | 145° |
| Video compression | H.264 |
| Bit rate | 32Kbps~2Mbps |
| Max resolution | 1920 × 1080 |
| Framerate | 1~25 per second |
| Picture settings | Support HD/SD; support flip; |
| Storage | SD card (Max 128G) |
| Audio | Two-way audio |
| Protocols | HTTP, DHCP, DNS |
| WiFi standard | IEEE802.11b/g/n |
| Frequency | 2.4 GHz ~ 2.4835 GHz |
| Bandwidth | 20/40MHz |
| WiFi encryption | WPA-PSK/WPA2-PSK |
| Security | AES128 |
| Working temperature | -20°C~50°C |
| Power | DC5V,1A |
| Consumption | 4.5W MAX |
| Size(mm) | 52.1x50x94.9 |
| IP Protection | IP65 |
| Battery | 6700mA |
| Model | TPA-46B050100UU |
| Input voltage | 100-240Vac |
| Input frequency | 50-60Hz |
| Output voltage | +5Vdc |
| Output current | 1A |
| Output power | 5W |
| Efficiency | 73.62% |
| No-load Consumption | < 0.1W |
Support
For support and further information, visit www.arenti.com.
Symbols:
Direct current (DC): Indicated by a symbol with parallel lines.
WEEE Symbol (crossed-out wheelie bin): This symbol indicates that batteries and out-of-order products should not be disposed of with household waste. Due to potentially hazardous substances, they may harm health or the environment. Please return these products to your retailer or use the selective collection services provided by your city.
CE Marking: Arenti declares that the radio equipment type 'GO1' is in compliance with the European Union Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.arenti.com.
