IPEVO AI WIRELESS MIC DUO
Vurbo.ai-Powered Wireless Lavalier Mic
Transcribe, Translate, & Summarize Any Conversation With AI.
When IPEVO AI WIRELESS MIC DUO Meets Vurbo.ai
Enhance your experience with IPEVO AI Wireless Mic Duo and Vurbo.ai for real-time transcription, translation, text assistant, and meeting summarization.
Package Contents
- License: Vurbo.ai license card
- Transmitter (Microphone) x 2
- Receiver x 1
- Windshield x 2
- USB-C to USB-C cable x 1
- 3.5mm male to male jack audio cable x 1
- USB-A to 3 x USB-C cable x 1
- Quick start guide
- Carry case
Get to Know Your IPEVO AI WIRELESS MIC DUO
Transmitter Introduction
Status Indicator
- ● Green: Connected to Receiver
- ●● Flashing Green: Disconnected
- ●● Flashing Red: Low battery
- ● Red: Charging when turned off
- Off: 1. Turn off, 2. Fully charged when turned off
Circular transmitter device with Vurbo.ai logo and indicator lights.
Microphone Features:
- Power Button: Press and hold 3 sec to turn on.
- Clip: [clip]
- AI Button: Noise reduction on/off.
- dB Button: 3-level adjustment of voice capture [0dB/ 6dB/ 12dB].
- USB-C Charging Port: [USB-C port]
Receiver Introduction
Rectangular receiver device with display and ports.
- USB-C Port: [USB-C port]
- Clip: [clip]
- Power Button: Press and hold 3 sec to turn on.
- 3.5mm TRS Audio Output: [3.5mm audio output]
- Display: Shows AI status, battery life, voice capture levels.
Power Up for Nonstop Performance
Fully charge before use for optimal performance. A full charge lasts up to 18 hours on average.
Charging setup: A USB-A interface 5V/1A charging power supply (not included) connects via USB-A to 3 USB-C charging cables to the Receiver and two Transmitters.
Start to Use Your IPEVO AI WIRELESS MIC DUO
- Step 1: Connect Receiver to a computer or mobile device via USB or 3.5mm audio cable.
- Step 2: Auto-pairs upon turning on.
Diagram showing Receiver auto-pairing with Transmitter 1 and Transmitter 2.
The usability of external mics depends on the app settings.
Step 3: Transmitter voice capture mode.
- (a) Personal Use: Recommended when using Vurbo.ai. (Mic clipped to shirt)
- (b) Group Discussion: Approx. 1.5m voice pickup. (Mics used by people around a table)
Remark: Mount windshield on transmitter to reduce background noise.
*Disable AI noise reduction when indoors or using Vurbo.ai for better performance.
Start Your Vurbo.ai Exploration
Transcribe, Translate, & Summarize Any Conversation With AI.
- ? Transcribe
- ? Text Assistant
- ? 2-Way Translation
- ? AI Chat
- Download Vurbo.ai on the website.
- Log in to Vurbo.ai with your IPEVO account and password. First-time users need to create an IPEVO account.
- Enter your product key to add a license.
- Begin exploring Vurbo.ai.
For more information, visit https://vurbo.ai/ to learn about its powerful capabilities.
⚠ Precaution: Do not use/store the product in the following environments:
- Near heat sources
- Locations with high humidity
- Sandy or dusty places
All trademarks, logos, and brands are the property of their respective owners and are used for identification purposes only.
Regulatory Information
FCC Declaration
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Compliance
CAN ICES-003(B)/NMB-003(B)
IC Caution. RSS-Gen Issue 3 December 2010 & CNR-Gen 3e édition Décembre 2010:
- English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
- French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: [1] l'appareil ne doit pas produire de brouillage, et [2] l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Disposal
This symbol on the product, in the user manual or on the packaging means that your electrical and electronic devices should be disposed of separate from household waste at the end of their life cycle. There are separate collection systems for recycling in the EU.
Vurbo.ai
IPEVO | innovating communications
Vurbo.ai
