Pyle Classic Retro Vintage Style Microphone & Swing Stand User Manual

Assembly Instructions

1. Please install the BASE with 5 screws, then put 5 screw covers on the base.
2. Please screw the CONNECTING PART to the top of the Swing Stand.
3. Install the RETRO MICROPHONE on the top of the CONNECTING PART.
4. Connect the microphone cable to the RETRO MICROPHONE and other audio equipment.
5. You could install the SWING PART to the ground directly as shown in the following pictures. (Spare parts sold separately.)

Diagram Description: The diagram illustrates the assembly of the microphone and stand. It shows the 'RETRO MICROPHONE' connected to a 'Connecting Part', which attaches to the 'Microphone Cable'. The 'Screw-type Up and Down Control part' is also visible. The stand components include the 'Swing Stand', 'Screw', and 'Base'.

Image Description: Two small images depict the attachment of the 'SWING PART' to the base of the stand.

Features

• Classic Retro-Style Performance Microphone + Stand
• Enjoy Tomorrow's Sound Performance with Classic & Iconic Style
• Studio and Stage-Tested Design
• Base Pivot Joint: Adjustable & Tilting Mic Pole Stand
• Mic Pole Automatically Resets to Original Position After Moving
• Integrated Cable Management
• Concealed XLR Cable Exits Through the Base
• Quick & Easy Height Adjustment
• Simple Screw-Type Control Knob
• Perfect for On-Stage and In-Studio Use
• Rugged Floor Stand Base Plate
• Includes Integrated XLR Cable
• Lightweight & Maneuverable Microphone Pole
• Microphone ON/OFF Switch

Technical Specs

• Connector Type: XLR (3-Pin), Located at Base Plate
• Adjustable Mic Stand Height: 49.0" - 69.0" inches
• 360° Tilting Microphone Pole Rotation
• Mic Pole Stand Material: Aluminum
• Microphone Pattern: Unidirectional
• Microphone Element: Dynamic Moving Coil
• Microphone Housing: Engineered ABS Plastic
• Impedance (at 1kHz): 600 Ohm plus/minus 30%
• Sensitivity (0dB = 1v/pa at 1kHz): -52 plus/minus 3dB
• Frequency Response: 50Hz-12kHz
• Base Diameter: 14.96"
• Base Weight: 10.8 lbs.
• Base Material: Cast Iron

For questions, service, or repair, visit us online at PyleUSA.com/ContactUs.

Website: www.PyleUSA.com