EWEADN TK950 Keyboard
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
1. Scope of Product Application
The EWEADN TK950 keyboard supports Bluetooth 5.0 standard, 2.4G standard, and wired three-mode connection. It is compatible with computers running Windows (Win2000, WinXP, Vista, Windows 7, Win10) and MAC systems. In Bluetooth mode, it can also connect to mobile phones with Bluetooth functionality.
2. Hardware Requirements
A phone or computer with Bluetooth 5.0 standard and a USB port available for connecting devices.
3. Mode Link and Switch
The keyboard offers three connection modes: Bluetooth, 2.4G, and wired.
- Bluetooth Connection: Use FN+1, FN+2, or FN+3 to switch to Bluetooth channels 1, 2, or 3 respectively. Press and hold for 3 seconds to initiate pairing. The Bluetooth names are (BT KB 3.0) and (BT KB 5.0).
- 2.4G Connection: Short press FN+4 to switch to the 2.4G channel. Press and hold for 3 seconds to initiate pairing. Plug the 2.4G receiver into your computer's USB port to experience the connection immediately.
- Wired Connection: Press FN+5 to enable wired mode. Connect the TYPE-C interface to the keyboard and the USB interface to the computer.
5. Product Characteristics
- Mechanical keyboard
- Three-mode connection (Bluetooth, 2.4G, Wired)
- Separate TYPE-C power cable and key cable
- Full bond no punch (anti-ghosting)
6. Key Combination Function and Lighting Sequence
Multimedia and Lighting Control:
- FN+F1: My computer
- FN+F2: Homepage
- FN+F3: Mail
- FN+F4: Multimedia player
- FN+F5: Previous song
- FN+F6: Play/Pause
- FN+F7: Next song
- FN+F8: Stop
- FN+F9: Search
- FN+F10: Web Favorites
- FN+ESC: Reset light (hold for 3s)
- FN+Win: Lock Windows key
- FN+↑: Brightness +
- FN+↓: Brightness -
- FN+←: Lighting speed -
- FN+→: Lighting speed +
Lighting Sequence Switch (FN+INS):
Steady on mode (default) -> Breathing mode -> Press and off -> Go with the flow -> Drip ripple -> Streamer -> Streamer -> Dot color dazzling -> Hair trigger -> Snow without trace -> Button ripples -> Serpentine horse -> Stars -> Stream -> Diagonal change -> Sine wave of light.
7. Link Method: Connection Diagram
Wired Connection: A diagram shows a USB Type-C cable connecting the keyboard to a computer.
2.4G Connection: A diagram shows a USB receiver plugged into a computer's USB port, with an arrow indicating connection to the keyboard.
Bluetooth Connection: A diagram shows a computer and a mobile phone, with Bluetooth symbols indicating wireless connection to the keyboard.
8. Game Mode Lighting Setting
- FN+6: Game Mode 1 (FPS) - ASDW, ↑, ↓, ←, → keys light up.
- FN+7: Game Mode 2 (CF) - ASDW, Ctrl, Shift, Alt, Space, RGQEB, 1-5, Tab, F1-F3, Home, End, PgUp, PgDn, PrtSc, Scroll Lock keys light up.
- FN+8: Game Mode 3 (COD) - QWERT, ASDFG, C, V, 1-7, Ctrl, Shift keys light up.
- FN+9: Game Mode 4 (RTS) - Space, 1-0, Ctrl, Shift, Alt keys light up.
- FN+0: Game Mode 5 (LOL full) - QWER, DGF, B, V, Ctrl, Alt, Tab keys light up.
Indicator Light Status: The last separate indicator light shows charging status: solid when charging, off when fully charged, flashing when low power.
9. List of Items
- 1. A keyboard
- 2. One TYPE-C connection line
- 3. 2.4G receiver
Certificate of Conformity
Inspector: QC PASS QC 06
Licensor and Manufacturer Information
Licensor: Yuandao Industrial (Shenzhen) Co., LTD
Room 1610, 16th Floor, Jinhao Building, No. 109, Fuyong Section, Guangshen Road, Baoan District, Shenzhen
Manufacturer: Jiangxi JICI Technology Co., LTD
Building 3, Godfrey Industrial Park, Lvbao Avenue, Qingyuan District, Ji'an City, Jiangxi Province
Contact number: 0755-23089616
Website: www.eweadn.cn
Product implementation standard number: Keyboard GB/T 14081-2010
Note: The product picture is for reference only, there may be differences with the actual product. Please refer to the actual product.